---

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it

---

REGA PLANAR 1                     Listino  ufficiale  €.   399,00

REGA PLANAR 1 noce                                                             Listino  ufficiale  €.   429,00

REGA PLANAR 1 PLUS                                                             Listino  ufficiale  €.   509,00

REGA PLANAR 1 PLUS noce                                                        Listino  ufficiale  €.   549,00

Giradischi assolutamente 'Plug&Play' graziealla regolazione automatica del bias, nuovo braccio RB110 con cuscinetti a tolleranza zero per garantire attriti minimi, nuovo motore 24v a basso disturbo e migliore stabilità di rotazione, nuovo portatestina più rigido nuovo, telaio laminato lucido, nuovo alloggiamento perno per ridurre le tensioni sul perno e togliere possibili problemi di energia sul telaio, nuovo piatto da 23mm, nuovi piedini per migliorare la stabilità e ridurre le vibrazioni, testina Carbon bianco - nero 

Giradischi Planar 1 PLUS  con stadio fono per collegamento diretto con quasi tutti i sistemi dotati di un ingresso linea standard grazie al cavo (phono-phono) in dotazione. Planar 1 Plus è dotato di tutte le caratteristiche del modello Planar 1, inclusa la testina Carbon e il set-up resta facilissimo e velocissimo

The new Planar 1 available from July 2016.The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl.Performance beyond price Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega's bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable for 2016. If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further Tonearm
Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance. Cartridge Rega Carbon cartridge supplied fitted as standard.
24v synchronous motor The first entry level Rega turntable to use a 24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.
 Plinth Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss whit  Central Bearing housing Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself whilst minimising the transfer of potential energy. (Patent pending) Platter Brand new, 23mm, higher mass, phenolic platter with improved flywheel effect for improved speed stability. Re-Designed feet New improved feet to increase stability and reduce vibration transfer. Motor cover tray New motor cover tray with integrated cooling.
 Balance Weight New 111g ‘Plug and Play’ balance weig

REGA QUEEN                                                                                      €.   799,00

nuovissimo giradischi progettato appositamente per i 'Queen’, base in acrilico high gloss con logo ‘Queen byRega’, piatto ‘Queen crest’ che utilizza un logo creato da Freddie Mercury, braccio RB101, testina Rega Carbon MM, motore a basso disturbo e bassa vibrazione 24v sincrono.

Queen by Rega’ turntable available now from your Rega retailer. Rega are proud to have been approached by legendary rock band ‘Queen’ to produce a limited edition (fully licensed) turntable to coincide with the release of their 18 piece 180g vinyl LP boxset containing all 15 hit studio albums sourced from the original master tapes mastered by Bob Ludwig and cut at Abbey Road studios. The design of this unique custom turntable includes reproductions of classic Queen logo’s, and incorporates the tonearm technology of the multi-award-winning ‘plug and play’ Rega turntables. Both brand and band are quintessentially English and the combination of engineering and musical achievements make for a perfect match. During a recent interview with Universal Music Rega's owner Roy Gandy discusses the importance of 'care' at every stage during the vinyl recording and pressing process click here Sept 2015. Turntable features:  The Queen turntable is a brand new product designed specifically for ‘Queen’. A custom designed high gloss acrylic laminated plinth silk screened with ‘Queen by Rega’ logo. Silk screened ‘Queen crest’ platter from artwork created by Freddie Mercury. Hand built RB101 tonearm. Factory fitted Rega Carbon moving magnet cartridge. Low noise low vibration 24v synchronous high performance motor. Queen dustcover lid badge. Optional upgrade (sold separately) is available to the handmade high performance moving magnet Rega Bias 2 cartridge. This cartridge is designed specifically for the ‘plug and play’ RB101 tonearm mounted on the ‘Queen by Rega’ turntable

REGA UNION FLAG                                                         Listino  ufficiale  €.   699,00

RP 1 giradischi completo di braccio RB 101 e di testina   testina  Bias 2

This multi-award winning turntable is designed and engineered to achieve outstanding performance way beyond the expectations of a product at this price point. The minimalist design of the RP1 and the use of extremely high quality components throughout ensure this amazing product will deliver unrivalled performance for the price. Excellent build quality, reliability and the ease of use of this ‘plug and play’ design, combine to make a product guaranteed to offer a lifetime of musical enjoyment. The only thing entry level about the RP1 is the price.•Plug and Play design, set-up in less than thirty seconds. •Hand assembled RB101 tonearm. •High quality, low vibration motor. •Phenolic resin, flywheel effect platter. •Factory fitted Carbon moving magnet cartridge. •Performance Pack upgrade available factory fitted or as an aftermarket upgrade pack (optional).

REGA PLANAR 2         Listino  ufficiale  €.   699,00

Nuovo braccio RB220 con cuscinetti atolleranza zero per garantire attriti minimi,supporto verticale ancora più rigido, tuboRega, telaio in acrilico laminato lucido,nuovo motore 24v a basso disturbo e bassavibrazione, nuovo alloggiamento perno perridurre le tensioni sul perno e toglierepossibili problemi di energia sul telaio, nuovo piatto in vetro da 10mm, nuovi piedini per migliorare la stabilità e ridurre le vibrazioni, testina Carbon

REGA PLANAR 3                                                                 Listino  ufficiale  €.   945,00

Nuovo braccio RB330 massima stabilità e (quasi) zero attrito, nuovo cavo phono REGA, nuovo contrappeso, telaio in acrilico lucido, doppie staffe per massima rigidità, nuovo piatto in vetro da 12mm, nuovi piedini per aumentare la stabilità e ridurre le vibrazioni, Motore 24V con nuova scheda di controllo pronta per la TTPSU. bianco - nero high gloss .rosso  • Testina non inclusa.

RP3 Turntable The multi award winning RP3 is the latest incarnation of the world famous Planar 3. Delivering serious performance at an unbeatable price, the RP3 guarantees to integrate into any hi-fi system effortlessly. The RP3 uses our lightweight high rigidity plinth design, a float glass platter, precision bearing and our unique double brace technology, all mounted with the hand assembled RB303 tonearm.The RP3 also benefits greatly from a low vibration, low noise, 24v motor that is hand tuned to its own circuit before fitting. This circuit is designed to minimise vibration transfer and maximise performance.You can also specify to have the award winning Rega Elys2 moving magnet cartridge, factory fitted (recommended). All of these features combine perfectly to extract more detail from your vinyl than ever before.Rega has pioneered the use of lightweight rigid plinths. Clever use of lightweight particulate core with a highly rigid phenolic resin skin became the foundations of the high level of performance achieved by the now iconic Planar turntable range. The RP3 takes this design philosophy to the next level. A super lightweight plinth combined with a phenolic resin double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound "stressed beam" assembly. This rigid plinth design prevents energy absorption and unwanted resonance, which will add unnatural distortions to the music. Equally, heavier mass can transfer more unwanted energy, such as motor or bearing noise directly into the rotating record. The use of braces instead of the complete skin allows double thickness phenolic resin in these key areas while providing further weight reduction to the plinth which directly addresses the issue of mass absorption and unwanted energy transmission.RB303 Tonearm - Making the best better Designed using the latest 3D CAD & CAM technology, the new RB303 is the culmination of more than 30 years of tonearm design experience. Due to advances in technology, we have been able to fine tune the iconic RB300 tonearm design. Featuring a brand new tube with increased rigidity to the bearing housing, arm carrier and headshell coupled with intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the high precision bearing assemblies guarantees to gather more information from your vinyl than •Hand assembled RB303 tonearm. •24v low noise motor / float glass platter.•Lightweight double braced plinth.•Precision main bearing. •Factory fitted Elys2 MM cartridge (optional). Compatible with the TT-PSU electronic speed change and power supply box (optional).

REGA PLANAR 6                                                                            Listino  ufficiale  €.  1.640,00

Il Planar 6 è stato costruito sull'enorme successo di RP8 e RP10, è il primo giradischi Rega costruito con una base in un materiale ultra-leggero creato per l'industria aerospaziale, racchiuso in un nuovo laminato ad alta pressione sottilissimo e rigidissimo, in una finitura grigia scura opaca con bordo lucido; il Planar 6 è dotato di un sottopiatto intero in alluminio, un nuovo motore 24V sintonizzato a mano ed abbinato alla sua nuova alimentazione separata NEO e all'apposita puleggia, dotata della cinghia upgrade come standard.  • Braccio RB330 – Progettato utilizzando le più recenti tecnologie CAD e CAM 3D, il nuovo RB330 è il distillato di 35 anni di esperienza nella progettazione di bracci. Una nuovissima sede per lo snodo e l’ultimissima versione dei tubi a redistribuzione intelligente della massa assicurano a questo braccio il minimo numero di punti di risonanza. La grandissima stabilità combinata con la quasi nulla frizione del nuovo cuscinetto ad alta precisione permettono di raccogliere più informazioni che mai dal vostro vinile.• Telaio in Tancast 8 (materiale sviluppato per uso aerospaziale)  • Finitura ‘Polaris Grey’ • Nuova cinghia • Nuovo alimentatore separato Neo PSU • Nuovo motore sincono 24 V a bassissima vibrazione accoppiato in fabbrica uno a uno con l'alimentazione Neo PSU. • Nuova cappa parapolvere smoked. • Testina non inclusa.

 

REGA PLANAR 8                                                                                                           Listino  ufficiale  €. 2.990,00

NUOVO giradischi, base più leggera, tecnologia a doppio pilastro, NUOVO braccio RB880 senza testina, piatto in triplice strato di vetro con super effetto volano, motore a basso rumore a 24 volt, nuove cinghie, alimentazione esterna NEO PSU

RP8 Turntable. The RP8 is a ground breaking turntable which takes Rega’s design philosophy further than ever before. A radical new plinth design using custom materials, the RB808 tonearm , 24v low voltage motor controlled by a customised hand tuned electronic power supply, a triple layer float glass platter and a re-designed and improved version of our Planar 9 precision engineered hub bearing assembly. Available with the option of the RP8’s perfect partner the Rega Apheta moving coil cartridge factory fitted (recommended). These are just some of the features of this amazing turntable designed to extract more music from your vinyl than ever before.  In 2013 the RP8 was voted “one of the best designs of all time” by two of the worlds most respected designers, Apple’s Sir Jony Ive and Marc Newson. The Evolution of Revolution Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega’s experience and previous achievements allow us to continually develop and produce better products. The RP8 represents probably the biggest step forward in the evolution of Roy Gandy’s turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms. The RP8 is the first of our “skeletal” design turntables offering ground breaking levels of performance and amazing value for money.RB808 Tonearm The RB808 tonearm is packed with new features pushing the boundaries of tonearm design. All Rega tonearms are meticulously hand built by a team of highly skilled technicians. The RB808 has improved bearings and a tightened spindle fit tolerance over previous models (each bearing is individually selected to find the perfect match for the chosen spindle). This is a proven method of increasing the amount of detail retrieved from the record surface. A brand new low mass precision engineered vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP8 turntable. The RB808 uses the latest Rega arm tube. Completely redesigned to redistribute mass, further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly using CAD design to blend the multiple varying tapers. Externally we have fitted a bespoke Rega designed low capacitance phono cable, which uses an advanced phono plug assembly. This has only two parts to minimise joints and incorporates a twist and clamp design locking the plug to the terminal. The design increases connectivity and ensures the signal path is kept as clean as possible.  Custom TT-PSU power supply The compact TT-PSU uses a high stability, crystal locked, low distortion sine wave generator. This, along with an efficient drive amplifier fed from a stabilised DC power supply, generates a 24v AC balanced signal of less than 0.05% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the improved Rega anti-vibration circuit built into the RP8 motor PCB. Magnesium and Phenolic - Dual bracing A super lightweight plinth combined with a double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound “stressed beam” assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. The RP8 takes our double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega have obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is phenolic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonance. By using two different materials together they decrease the natural frequency of each other by self-damping. N.B Rega will always use materials in the form that achieves maximum performance. The raw magnesium will develop patina and change colour over time, this is perfectly normal. Coating to prevent this discoloration would affect sonic performance therefore the material remains raw. If you wish to bring the shine back to your magnesium top brace careful use of metal polish will restore it to its original condition. Super flywheel effect triple layer glass platterThe new RP8 three piece laminated glass platter is the result of collaboration with a small, emerging, young British glass engineering company. As a general rule the only part of a turntable that requires extra mass is the turntable platter in order to achieve constant rotational speed. However a heavier platter creates more problems for the main bearing design so again an ideal compromise creates the best solution. Practically this means keeping as much of the mass to the outside rim of the glass platter to create more flywheel effect but keeping the inside of the platter as light as possible without sacrificing stiffness. The RP6 was the first Rega turntable to use a precision engineered glass ring laminated to the outside using modern CNC techniques to ensure concentricity.The RP8 takes it one step further by laminating three rings together to produce the RP8 super flywheel effect glass platter - an engineering triumph ! Skeletal plinth design with polyolefin foam core Controversially Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: unwanted noise at microscopic levels is developed by the turntable motor and main bearing. The plinth can also pick up airborne vibration from the music. From the beginning in the 1970’s, Rega pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fibre board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed such as an aircraft wing or a Formula 1 chassis.The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer who is happy to pay a little more for higher sound quality. The RP8 turntable utilises a unique new stressed skin structure produced from thin phenolic skins sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega over a three year period. The RP8 plinth is 7 times lighter than the weight of the original Planar 3 plinth. Rega has added even more stiffness in the crucial area between the arm and the main bearing. De-coupled outer frame and dust cover A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover into the design. We have constructed an outer frame that minimises contact between the inner and outer plinth. The only points of contact are three location devices on the feet which centralises the inner and outer plinths perfectly. This makes set-up extremely easy and allows the use of a dust cover. The RP8 can be used without the outer frame if so desired.Key features: Hand made RB808 tonearm / precision engineered bearing and aluminium sub platter/ triple layer float glass platter / custom matched TT-PSU individually tuned to its own motor / Rega’s pioneering skeletal plinth design / Apheta MC available as factory fitted (optional) / Magnesium and phenolic bracing.•Hand made RB808 tonearm.•Precision engineered bearing and aluminium sub platter.•Triple layer float glass platter.•Custom matched TT-PSU individually tuned to its own motor.•Rega’s pioneering skeletal plinth design. •Factory fitted Apheta MC cartridge available (optional). •Magnesium and phenolic bracing.
 

REGA PLANAR 10                                                                                                           Listino  ufficiale  €. 5.690,00

RP 10 giradischi completo di braccio RB 2000  senza testina   telaio skeletai piatto  in  ceramica completo di  supporto  e  con alimentazione esterna a  controllo elettronico psu- colori nero • Testina non inclusa.

RP10 Turntable The RP10 represents the biggest step forward in the evolution of Roy Gandy’s turntable design philosophy. This extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date. Available with the option of the RP10’s perfect partner, the Rega Apheta moving coil cartridge factory fitted (recommended). The Evolution of Revolution Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega’s experience and previous achievements allow us to continually develop and produce better products.RP10 Custom power supply Housed in Rega'svibration and speed control circuit dedicated to running the 24v low noise motor. The speed and control of the motor is achieved by using a new DSP (Digital Signal Processing) generator built upon a high stability crystal. This device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration and speed adjustments are then made to the power supply to tune the motor for optimal performance. RB2000 Tonearm The RB2000 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Rega tonearms, each one is meticulously hand built by a team of highly skilled technicians. The RB2000 uses improved bearings with each one being hand selected to be an interference fit with the paired spindle matching both the inside and outside diameters. This is a Rega developed method of increasing the amount of detail retrieved from the record surface, designed specifically to maximise performance of the tonearm and cartridge. The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB2000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new low mass, precision engineered, vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP10 turntable. The RB2000 uses the latest award winning Rega arm tube. Each one is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly, whilst reducing stress on the bearings even further. Magnesium and Phenolic Dual bracing - A super lightweight plinth combined with a double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound “stressed beam” assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. The RP10 takes our double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega have obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is phenolic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonances. By using two different materials together they decrease the natural frequency of each other by self-damping. N.B Rega will always use materials in the form that achieves maximum performance. The raw magnesium will develop patina and change colour over time, this is perfectly normal. Coating to prevent this discoloration would affect sonic performance therefore the material remains raw. If you wish to bring the shine back to your magnesium top brace careful use of metal polish will restore it to its original condition. Super flywheel effect ceramic platter The RP10 uses a custom ceramic flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The new platter features a modified construction over the previous P9 version with improved coupling to the sub platter. 4v Low noise motor The motor is a high specification, 24v twin phase synchronous unit. It is controlled by Rega's unique and innovative RP10-PSU power supply. The motor drives the CNC machined pulley, sub platter and hub-bearing assembly via the twin belt drive. Each motor is individually hand tuned to its own custom power supply in the factory to minimise vibration, motor noise and ensure optimum performance. Skeletal plinth design with polyolefin foam core Controversially, Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: unwanted noise at microscopic levels is developed by the turntable motor and main bearing.The plinth can also pick up airborne vibration from the music. From the beginning in the 1970’s, Rega pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fibre board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed such as an aircraft wing or a Formula 1 chassis. The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer who is happy to pay a little more for higher sound quality. The all new RP10 turntable utilises a unique new stressed skin structure produced from thin phenolic skins, sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega over a three year period. The RP10 plinth is 7 times lighter than the weight of the original Planar 3 plinth. Rega has added even more stiffness in the crucial area between the arm and the main bearing. De-coupled outer frame and dust cover A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover into the design. We have constructed an outer frame that minimises contact between the inner and outer plinth. The only points of contact are three location devices on the feet which centralises the inner and outer plinths perfectly. This makes set-up extremely easy and allows the use of a dust cover. The RP10 can be used without the outer frame if so desired

---

---

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it

---

REGA FONO MINI A2D                                                            Listino  ufficiale  €.   159,00

Fono Mini A2D The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use.The Fono Mini A2D amplifier offers exceptional performance and incredible value for money and promises to be a valuable addition to any hi-fi set up.To transfer vinyl to your PC, you will need to install a digital audio editor. Such software is widely available as a free download (such as Audacity), from the internet. This is a simple interface which allows monitoring of volume and balance whilst transferring your audio to your PC hard drive.Audio editing software includes a level meter which indicates the output level achieved when playing a piece of vinyl. You should adjust the output as necessary via the ‘Level’ control located on the front panel. Always take special note of record levels to ensure optimum recording quality.This is a cost effective version of the Fono MM and based on the phono amplifier as used in the Brio-R amplifier.Simply switch on, sit back and enjoy! •Input sensitivity: 5mV for 500mV output•Input loading: 47k +100pF•Maximum input level: 70mV @ 1KHz•Output Impedance: 100 Ohms•Signal to noise ratio: 78dBA ref 5mV•Power requirements: 24VAC 85mA•Input for full scale digital output: 7.5mV

REGA FONO MM DISCK STAGE                                                     Listino  ufficiale  €.   360,00

REGA FONO MC  DISCK STAGE                                                     Listino  ufficiale  €.   425,00

The Fono MM is a moving magnet disc stage which has been designed to be effective, easy to use and above all reproduce music. The new surface mount board layout has been optimised to work with the latest generation of RP turntables.This compact design, now housed in our custom case to aesthetically match the rest of the range, offers performance way beyond that expected at this price point and makes an excellent addition to any vinyl based system. The Fono MM simply connects to the line input on the amplifier and the tonearm leads and earth (if used) to the input sockets and earth terminal of the Fono MM back panel.•Input sensitivity = 3mV for 200mV output / Input loading = 47KW in parallel with 100pF•Maximum input level = 100mV •Minimum output load impedance = 36.5dB•Power requirements = 24v AC @ 110mA (Rega PS1) •Frequency response (50KW load) = 17Hz (-3dB) to 100KHz (-0.2dB) •RIAA accuracy (50KW load) = +/-0.2dB 100Hz to 100KHz•Dimensions: Width 178mm x Depth140mm x Height 45mm.

REGA ARIA MKIII                                                                  Listino  ufficiale  €.  1.675,00

Design Housed within our latest half width custom designed case are two entirely separate, high performance phono stages. One fully adjustable, dedicated moving coil and one moving magnet. Each stage is designed and engineered to maximise the potential of your vinyl system whilst remaining easy to use and set up. Technology The Aria is an "all analogue amplifier" with no digital control circuitry. The fully aluminium case screens the internal circuit from any stray RFI signals. Our designers have avoided including any superfluous gadgets as they obstruct the signal path and degrade the sound quality. The Aria incorporates many innovative design ideas including a self-adjusting servo control to keep the MC input circuit at its optimum, compensating for any variations in ambient or operating temperature. Both stages have their own separate input sockets and input pre-amplifier circuitry. This enabled us to design bespoke input circuitry for each cartridge type without compromise. Signal switching is performed at high level and low impedance (via relays) ensuring there is no degradation of the signal. MC Stage Design & Features The MC input uses parallel connected, low noise FET's (Field Effect Transistor's) configured as a compound pair. The use of FET transistors ensures there is no bias current flowing in the cartridge coil so as not to upset the delicate magnetic geometry of the cartridge. The MC input has the provision for selecting resistive input loading of 70W to 400W and capacitive loading of 1000pF to 4200pF. The input sensitivity can be changed by 6dB via the back panel. MM Stage design & features The MM input uses low noise, bipolar input transistors also configured as a compound pair. There are two separate power supplies for each channel and further sub-power supplies for each of the low noise input circuits. Nichicon FG electrolytic capacitors have been used in critical positions throughout the power supplies. Polypropylene capacitors have been used in the signal path and equalization networks. Discrete circuitry is used throughout the signal path ensuring full control of the circuit design.  •Maximum output level = 11v RMS•Rated output level = 200mV•Output resistance = 100Ù•Minimum output resistance for a –3dB point at 15Hz = 1K•AC supply 230v & 115v Nominal +/- 10%•230v 20mm Fuse T250mAL•115v 20mm Fuse T500mAL•Power Consumption = 10 Watts•Ambient operating temperature 5 to 35°C•Dimensions: Width 220mm x Depth 320mm x Height 80mm

REGA AUREA                                                      Listino  ufficiale  €.  6.250,00

Preamplificatore phono Reference MC completamente regolabile, a tre stadi, completamente simmetrico, disegnato solo per ottenere le migliori performance dalle testine MC e dalla riproduzione dei vinili.

Ios Reference The Rega Ios is a four stage, all symmetrical amplifier. To provide optimum performance it is dedicated to amplifying the very low level signals that are generated by moving coil cartridges. Designed as the ultimate MC phono stage and the perfect match for the Rega Apheta MC cartridge, the Ios has made the transition in to the reference style case to match the Isis and Osiris. The new Ios has the addition of balanced XLR ultra-low capacitance cabling.Design InnovationThe Rega Ios is a four stage, all symmetrical amplifier. The first stage uses a 1:10 step-up transformer which can be optimised to the cartridge by the selection of the correct loading and Zobel DC resistance correction network connected across the MC transformer secondary.The second stage is a symmetrical, compound pair class A amplifier, using paralleled low noise Hitachi transistors in the input stage. This drives the passive high frequency part of the RIAA (Record Industry Association of America) equalization stage. The third stage is a symmetrical class ‘A’ differential amplifier with a common base driver stage; this is also used as the active amplifier in the low frequency part of the RIAA equalization stage. The fourth stage is the active filter. This configuration uses the same circuit as found in the second stage. The filter element uses a very high bandwidth operational amplifier. The power supply is a symmetrical, discrete tracking power supply using fast diodes and a low noise voltage reference. Each stage has its own localised power supply and LED referenced current generators. Very high quality polypropylene capacitors have been used in the signal path. 1% tolerance polypropylene capacitors are used in the RIAA EQ stages and audio grade capacitors are used in the rest of the circuit. We hope that you enjoy this product as much as we have enjoyed creating it. •Dedicated moving coil phono stage•Adjustable gain & load control•Gold plated input sockets•Four stage all symmetrical amplifier•Symmetrical discrete tracking power supply•Balanced XLR output•Reference range casework•Ultra-low capacitance cabling•Mute function / Mono function•Reduced noise floor•Dimensions: Width 434mm x Depth 350mm x Height 97mm

---

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it

---

REGA CARBON                                                                          Listino  ufficiale  €.   55,00

Testina MM stilo sostituibile ,uscita 2,5mv a 1khz  cantiliver carbonio

Supplied as standard on the multi award winning RP1 turntable, the Carbon performs far beyond its budget price tag. •Output: 2.5mV at 1kHz •Stylus: User replaceable.•Fixing: Standard, two screws•Cantilever: Carbon•Colour: Black/White •Tracking Pressure 2-3g

REGA RB78C                                                                              Listino  ufficiale  €.  120,00

78C Testina MM stilo fisso mono per 33 giri mono 78C regeneration sostituzione del fonorivelatore

RB78 The RB78 is a general purpose mono cartridge designed to play most 78 rpm records. Output: 6.2 - 6.8mV Stylus: RB78 Fixing: Standard, two screws Coils: High Spec parallel wound coils Colour: Black

REGA BIAS 2                                                                           Listino  ufficiale  €.   155,00

Bias 2 Testina MM stilo fisso ellittico uscita 7+/- 0.2mv bobine avvolte in parallelo , fissaggio  standard  2 viti

 Bias 2 Output: 6.8 - 7.2mV Stylus: elliptical Fixing: standard, two screws Coils: High Spec parallel wound coils Colour: Red

REGA ELYS 2                                                                                 Listino  ufficiale  €.   250,00

Elys 2 Testina MM stilo fisso ellittico uscita 7+/- 0.2mv bobine avvolte in parallelo ,3 punti di fissaggio

Elys 2 Output: 6.8 - 7.2mV Stylus: elliptical Fixing: Rega three point fixing Coils: High Spec parallel wound coils Colour: Blue

REGA EXCAT 2                                                                            Listino  ufficiale  €.   499,00

Exact  Testina MM stilo fisso ellittico uscita 7+/- 0.2mv bobine avvolte in parallelo ,3 punti di fissaggio taglio  diamante  vital

Exact Output: 6.8 - 7.2mV  Stylus: Vital. Complex fine line micro-ground from a rectangular diamond billet. Fixing: Rega three point fixing Coils: High Spec parallel wound coil Colour: Yellow

---

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it

---

REGA ANIA                                                                                      Listino  ufficiale  €.    840,00

REGA ANIA  PRO                                                                     Listino  ufficiale  €. 1.190,00

testina MC che utilizza la stessa bobina  delle altre MC Rega, avvolta a mano e molto complessa, posizionata in un corpo estremamente rigido che assicura una costruzione molto accurata e il tipico metodo di fissaggio Rega a tre punti, Ania ha un magnete in neodimio; tutto questo consente grande libertà di tracciatura ed elevato dettaglio, maggiore dinamica ed equilibrio.

Versione pro testina MC che utilizza la stessa bobina  delle altre MC Rega, avvolta a mano e molto complessa, posizionata in un corpo estremamente rigido che assicura una costruzione molto accurata e il tipico metodo di fissaggio Rega a tre punti, Ania PRO ha un magnete in neodimio; tutto questo consente grande libertà di tracciatura ed elevato dettaglio, maggiore dinamica ed equilibrio.

REGA APHETA 3                                                                     Listino  ufficiale  €.  1.950,00

Grazie a diamanti dal profilo sempre più fine montati a 90°, Apheta 3 riesce ad estrarre dai solchi del disco sempre maggiori dettagli che si traducono poi in maggiore musica; magnete in neodimio super potente e bobina avvolta a mano su una piccolissima croce in ferro per ridurre il peso consentendo maggiore libertà nella tracciatura del solco; corpo unico in alluminio anodizzato con una copertura rigida che protegge i finissimi cablaggi interni perchè il montaggio della testina sul giradischi sia sicuro e senza rischi

Apheta The Story When asked by our customers to produce an MC cartridge we decided to analyse existing designs on the market. We were astonished to discover that 99% of the products followed the same design principles established almost 50 years ago when materials and manufacturing processes were far less advanced than today. Conventional MC cartridges utilize a steel suspension system (tie wire) which creates a high amplitude H.F resonance (normally around 8-12Khz). Such resonance is unacceptable and is usually damped by a rudimentary piece of foam rubber. However the foam rubber deteriorates with age and cannot prevent the complete structure from vibrating and "ringing".The specifics and adjustment of the tie wire and damping determine whether the cartridge is under damped (bright) or over damped (warm and bass heavy). A happy medium is rarely achieved. This encouraged Rega to pursue a new direction inspired by modern materials and the basic laws of magnetism. The Rega Apheta contains neither a tie wire nor a foam damper. After 4 years and many hundreds of experiments the innovative design of the Apheta was complete. Moving coil aficionados will all recognise the long search for super clear high frequency combined with firm tight bass.  The search is now over. Apheta Typical Technical Specifications Tracking pressure 1.75g Input load impedance 100 Ohms Output impedance 15 Ohms Output voltage 500uV

REGA APHELION2                                                                       Listino  ufficiale  €.   4.900,00

testina MC, Corpo in alluminio anodizzato nero a “tolleranza zero”, Stilo in diamante con profilo “Vital” rotato di 90°, Peso di lettura: 1.9g, Impedenza di carico in ingresso: 100 ohm, Impedenza di uscita: 10 ohm

APHELION The Aphelion is the third generation of Rega's unique moving coil cartridges.Taking the technology developed from the latest Apheta 2 to the next level, our engineers have fine tuned every aspect of the original design. Aphelion features a new boron cantilever and super high-powered, neodymium magnet and a coil meticulously hand wound on an iron micro cross that is fifty percent smaller than the original. The weight reduction of the generator allows us greater freedom to track the vinyl groove accurately ensuring even more detail is extracted from the vinyl. The Aphelion is housed within a completely redesigned, single piece, aluminium black anodised body and protected by a CAD designed, clear rigid cover to protect the internal fine wires, making handling whilst fitting, safe and risk free. The Aphelion is the perfect partner for the RP10 turntable and RB2000 tonearm - see complementary components.The hand built Aphelion Moving Coil cartridge is the ultimate in micro engineering and design.Taking two years to develop this ground breaking new cartridge is guaranteed to retrieve more music from your vinyl than ever before. To improve stiffness we have introduced a boron rod cantilever to increases tracking accuracy and performance. The stylus is a diamond 'Vital' profile rotated through 90 degrees to improve rigidity of the diamond mount.Specifications : Tracking Pressure 1.75 - 2.00gInput load impedance 100 ohms Output impedance 10 ohms Nominal output voltage 350μV Channel Balance : ≥ 10μV Separation : ≥ -29dB Key Features : Graded zero tolerance black anodised aluminium body Boron rod cantilever 'Vital' profile nude diamond stylus rotated through 90 degrees. Iron micro cross & coil assembly making one of the worlds smallest MC generators. Worlds most powerful minaturised neodymium magnet. High specification fine wire 0.018mm

---

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it

---

REGA RB220                                                                                         Listino  ufficiale  €.    350,00

braccio con dima

RB202 Tonearn The RB202 is the latest incarnation of one of our most popular tonearms, the original RB250.  The latest design takes full advantage of our brand new arm tube and the current three point arm mounting system. Each RB202 is a hand assembled, creating a precision crafted tonearm achieving extremely low friction levels and performance way beyond the expectations of a product at this price point.The hand assembled Rega RB202 tonearm is a precision crafted product. To create the low friction levels and meet minimum mass requirements many parts of the arm are delicate and require careful handling. The arm should always be treated with respect to achieve best performance.

REGA RB330                                                                                         Listino  ufficiale  €.    630,00

braccio con dima

RB303 Tonearm Making the best better Designed using the latest 3D CAD & CAM technology the new RB303 is the culmination of more than 30 years of tonearm design experience. Due to advances in technology we have been able to fine tune the iconic RB300 tonearm design.Featuring a brand new tube with increased rigidity to the bearing housing, arm carrier and headshell, coupled with intelligent redistribution of mass, ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the high precision bearing assemblies guarantee to gather more information from your vinyl than ever before.

REGA RB880                                                                                         Listino  ufficiale  €.  1.100,00

braccio con dima

RB808 Tonearm  The RB808 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Rega tonearms each one is meticulously hand built by a team of highly skilled technicians. The RB808 has improved bearings and a tightened spindle fit tolerance over previous models (each bearing is individually selected to find the perfect match for the chosen spindle). This is a proven method of increasing the amount of detail retrieved from the record surface.A brand new low mass precision engineered vertical bearing assembly has been manufactured to further complement the inherent design philosophy of the RP8 turntable. The RB808 uses the latest Rega arm tube. Completely redesigned to redistribute mass, further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly using CAD design to blend the multiple varying tapers  Externally we have fitted a bespoke Rega designed low capacitance phono cable. Which uses an advanced phono plug assembly. This has only two parts to minimise joints and incorporates a twist and clamp design locking the plug to the terminal. The design increases connectivity and ensures the signal path is kept as clean as possible.
 

REGA RB3000                                                                                     Listino  ufficiale  €. 2.190,00

braccio con dima

---

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it

---

 

REGA KYTE                                                                                     Listino  ufficiale  €.    349,00

diffusori a 2 vie, bass reflex, cabinet in resina fenolica,solida struttura interna con placche in ceramica, altoparlante dei medio-bassi MX-125 costruito a mano, altoparlante per le alte frequenze Mprogettato da Rega, progettati e costruiti in Inghilterra

REGA RX5                                                                                 Listino  ufficiale  €.   1.200,00

diffusore da pavimento a 2,5 vie, impedenza 6  Ohm, 89dB impedenza 6 Ohm, 89dB, reflex frontale, nuovo driver bass mid-range REGA DX-125 (cono in carta), bass driver laterale  colori  : walnut - black ash - cherry

The Rega RX-FIVE loudspeaker system delivers balance, detail and dynamics thanks to a unique handmade set of three Rega designed drivers and crossover. The newly developed DX-125 bass mid-range driver (using a doped paper cone) is at the heart of the RX range and combines perfectly with the Rega ZRR high frequency and RR7.8 bass unit. These custom units are mounted in a newly designed cabinet enclosure constructed from 18mm MDF and covered in a choice of three beautiful real wood veneers.The RX-FIVE will integrate perfectly into any home and deliver exceptional performance and musicality with a smooth and accurate bass response.

REGA RX10                                                                    Listino  ufficiale  €.   5.600,00

diffusori da pavimento 4 vie a linea di  trasmissione TQW, impedenza media 6 Ohm ciliegio - noce - piano black

RS10 Loudspeaker The Rega RS-10’s have been designed to integrate perfectly into any system. Initially designed to complete our reference range, the RS10’s provide the perfect partner for the Isis CD player, Osiris amplifier and RP10 turntable. The RS-10 loudspeaker system offers the user the ability to adjust its performance to suit different locations via our ‘environment match’ adjustment feature.We have pioneered the integration of a BMR unit with the unique Rega ‘dual driver bass system’ and a completely new and exclusive Rega designed tweeter to create a very special and unique loudspeaker which offers unparalleled levels of control balance and dynamicsThe RS-10 loudspeaker uses a BMR (Balance Mode Radiator) to handle the majority of the audible music spectrum.The BMR design concept was conceived as a full range driver handling all musical frequencies from bass through to treble with a single driver and no crossover. This concept works remarkably well and produces a musical transparency normally associated with electrostatic loudspeakers. However no concept is perfect and a single BMR can only produce limited bass output and some people may prefer more precise musical images. Most loudspeaker systems have a crossover point for the mid-range driver and tweeter between 2 KHz and 3 KHz. This can upset the vocal region with distortion and phase shift. It is also where the human ear is most sensitive. Therefore with use of the BMR unit, Rega has been able to design a crossover point above the most critical range. The high frequency capability of the BMR, has allowed the two units to integrate to 6 KHz. This gives massive improvements in sound quality with greater clarity and detail in the music. Rega has pioneered the integration of a BMR with the unique Rega dual driver bass system and a completely new and unique Rega designed and UK manufactured tweeter. The high frequency sound of a BMR is so good that the quality level of any normal tweeter will not combine with it. This is why Rega felt compelled to design a new and unique tweeter that would complement the BMR unit. This new tweeter, the ZRR-10, uses Rega’s ZRR (Zero Rear Reflection) technology combined with an unparalleled production technique that allows the silk dome to be assembled directly onto the front plate thus eliminating a major source of unwanted vibration. Each tweeter is meticulously hand assembled at Rega’s factory in the UK and incorporates a copper Faraday ring which extends the frequency response of the tweeter up to 23KHz by lowering inductance of the voice coil. Read about Rega's ZRR HF Unit Technology here... For bass frequencies, the RS-10 uses two separate bass drivers connected in parallel. The drivers are different sizes, have different resonant frequencies and operate with individually separate cabinet loadings. A 200mm driver with a lightweight paper cone, 8 layer voice coil and a resonant frequency of 40Hz operates in a transmission line with port output extending below audibility coupled with a 125mm driver also with a lightweight paper cone, 8 layer voice coil and resonant frequency of 75Hz which is loaded by a small sealed cabinet.This system eliminates the normal single bass resonance by spreading smaller resonances across the entire bass frequency band and incorporates a degree of self-damping due to the parallel connection with the amplifier. The result is a much tighter and more tuneful bass register which can be adjusted in level to suit room characteristics. The loudspeaker can also be moved closer to or further from a wall resulting in an increase or decrease of low frequency to suit personal preference Crossover: Multiple high voltage parallel polypropylene capacitors with iron dust and air core inductors / Average impedance 6 Ohms.Crossover frequencies:•Bass to Mid 300Hz•Mid to High Frequency 6KHz•ZRR-10 tweeter unit sensitivity 88dB•8 layer 125mm bass drive unit - 75Hz•8 layer 200mm bass drive unit - 40Hz /Bi-wireable•Bi-ampable – YesCabinet construction and finish:•Available in High gloss Cherry, Piano Black or Walnut•25mm thick high density cabinet, 1/4 wave transmission line designCabinet dimensions:•Height 1005mm x Depth 440mm x Width 200mm•300mm foot print. Weight per speaker: 38Kg.

---

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it

---

 

REGA NEO PSU MK2                                                                  Listino  ufficiale  €.    370,00

PSU Alimentatore opzionale per giradischi REGA

PSU can only be used with the P3-24, P5 and P7 turntables. It is not compatible with any other Rega or manufacturers turntables. The all new TT PSU and motor anti-vibration circuit is a combination of the innovative P9 power supply along with an improved P25 anti-vibration motor drive feeding the P9 24V AC synchronous motor. The TT PSU uses a remote "wall wart" transformer therefore keeping the sources of hum & noise well away from sensitive parts such as the cartridge and phono leads. The compact TT PSU uses exactly the same high stability crystal locked low distortion sine wave generator as is used in the heart of the P9 power supply. This, along with an efficient drive amplifier fed from stabilised DC power supply, generates a 24Volt AC balanced signal of less than 0.05% distortion, which is completely unaffected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable. The drive voltage for the motor is run along the power lead to the turntable motor, which also carries the 33/45-RPM DC relay control voltage used to

 

REGA ATLAS                                                                    Listino  ufficiale  €.    290,00

 

bilancina elettronica per la misurazione   del peso di lettura

REGA STROBE KIT                                                                  Listino  ufficiale  €.    110,00

misuratore di velocità di rotazione per Mgiradischi, ideale per regolare NEO PSU quando acquistata come upgrade.

 

REGA WALL BRACKET                                                                   Listino  ufficiale  €.    270,00

staffa per montaggio a muro giradischi

REGA Turntable Mat                                                                   Listino  ufficiale  €.    44,00

Turntable Mat Standard tappetino standard in lana nero 22,00
Turntable Mat RP10 tappetino per RP10 e PLANAR 10 bianco 39,00
Turntable Mat coloured tappetino colorato rosso - blu  44,00

REGA CINGHIA                                                                   Listino  ufficiale  €.    30,00

REGA CINGHIA REFERENCE                                                        Listino  ufficiale  €.    50,00

REGA MOTORE 24V                                                               Listino  ufficiale  €.    250,00

 

kit upgrade per motore a basso disturbo e basse vibrazioni (per tutti i modelli Rega che non utilizzano la tecnologia a 24V