WHARFEDALE

SERIE DIAMOND 10Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

Stronger cabinet walls: The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance. Composite front baffle panel: The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units. Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole. Rear-firing twin reflex ports: The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale. Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing. Enhanced front grille with ‘invisible’ fixing: The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle. Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves. Neodymium-Powered Tweeter Mounted in Cast Alloy Surround: With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible. Blended SRBP Cone Surrounds: The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances. Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

Format Floorspeaker Bass Driver 165mm Bass/Mid Driver 165mm Tweeter 25mm Suitable Amplifier Power 20 - 150 w Nominal Impedance 6 Ω A/V Shielded no Sensitivity (1W @ 1M) 88 dB Nominal Frequency Range 35-24kHz HF Limit (-10dB) 44kHz Freq. Fb 38Hz Crossover Frequency 100Hz / 2.5kHz Dimensions (mm)(H*W*D) 900*223*301 Height on spikes/feet (mm) 955 Stronger cabinet walls: The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance. Composite front baffle panel: The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units. Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole. Rear-firing twin reflex ports: The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale. Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing. Enhanced front grille with ‘invisible’ fixing: The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle. Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves. Neodymium-Powered Tweeter Mounted in Cast Alloy Surround: With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible. Blended SRBP Cone Surrounds: The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances. Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

Format Floorspeaker Bass Driver 165mm Midrange Driver 50mm Dome Tweeter 25mm Suitable Amplifier Power 20 - 120w Nominal Impedance 6 Ω A/V Shielded no Sensitivity (1W @ 1M) 86 dB Nominal Frequency Range 35-24kHz HF Limit (-10dB) 44kHz Freq. Fb 40Hz Crossover Frequency 600Hz / 3.8kHz Dimensions (mm)(H*W*D) 850*223*301 Height on spikes/feet (mm) 880 Stronger cabinet walls: The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance. Composite front baffle panel: The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units. Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole. Rear-firing twin reflex ports: The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale. Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing. Enhanced front grille with ‘invisible’ fixing: The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle. Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves. Neodymium-Powered Tweeter Mounted in Cast Alloy Surround: With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible. Blended SRBP Cone Surrounds: The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances. Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

Format Floor speaker Bass Driver 125mm Bass/Mid Driver 125mm Tweeter 25mm Suitable Amplifier Power 20 - 120w Nominal Impedance 6 Ω A/V Shielded no Sensitivity (1W @ 1M) 88 dB Nominal Frequency Range 38-24kHz HF Limit (-10dB) 44kHz Freq. Fb 40Hz Dimensions (mm)(H*W*D) 850*194*278 Crossover Frequency 140Hz / 3.8kHz Height on spikes/feet (mm) 905 Stronger cabinet walls: The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance. Composite front baffle panel: The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units. Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole. Rear-firing twin reflex ports: The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale. Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing. Enhanced front grille with ‘invisible’ fixing: The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle. Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves. Neodymium-Powered Tweeter Mounted in Cast Alloy Surround: With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible. Blended SRBP Cone Surrounds: The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances. Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

WHAFERDALE DIAMOND 10.3 €.220,00 Per prezzo scontato TELEFONA / E-MAIL

diffusore da pavimento,2 vie, bass reflex, woofer da 13 cm, 100 W

Format Floorspeaker Bass/Mid Driver 125mm Tweeter 25mm Suitable Amplifier Power 20 - 100 w Nominal Impedance 6 Ω A/V Shielded no Sensitivity (1W @ 1M) 86 dB Nominal Frequency Range 40-24kHz HF Limit (-10dB) 44kHz Freq. Fb 42Hz Crossover Frequency 1.8kHz Dimensions (mm)(H*W*D) 800*194*278 Height on spikes/feet (mm) 855 Stronger cabinet walls: The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance. Composite front baffle panel: The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units. Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole. Rear-firing twin reflex ports: The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale. Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing. Enhanced front grille with ‘invisible’ fixing: The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle. Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves. Neodymium-Powered Tweeter Mounted in Cast Alloy Surround: With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible. Blended SRBP Cone Surrounds: The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances. Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

WHAFERDALE DIAMOND 10.2 €.160,00 Per prezzo scontato TELEFONA / E-MAIL

diffusore da scaffale, 2 vie, bass reflex, woofer da 16,5 cm, 100 W

Format Stand Mount Bass/Mid Driver 165mm Tweeter 25mm Suitable Amplifier Power 20 - 100 w Nominal Impedance 6 Ω A/V Shielded yes Sensitivity (1W @ 1M) 86 dB Nominal Frequency Range 40-24kHz HF Limit (-10dB) 44kHz Freq. Fb 42Hz Crossover Frequency 1.8kHz Dimensions (mm)(H * W * D) 364 * 223 * 301 Stronger cabinet walls: The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance. Composite front baffle panel: The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units. Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole. Rear-firing twin reflex ports: The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale. Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing. Enhanced front grille with ‘invisible’ fixing: The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle. Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves. Neodymium-Powered Tweeter Mounted in Cast Alloy Surround: With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible. Blended SRBP Cone Surrounds: The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances. Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

WHAFERDALE DIAMOND 10.1 €.120,00 Per prezzo scontato TELEFONA / E-MAIL

diffusore da scaffale,2 vie, bass reflex, woofer da 13 cm, 100 W

Format Stand Mount Bass/Mid Driver 125mm Tweeter 25mm Suitable Amplifier Power 20 - 100 w Nominal Impedance 6 Ω A/V Shielded yes Sensitivity (1W @ 1M) 86 dB Nominal Frequency Range 48-24kHz HF Limit (-10dB) 44kHz Freq. Fb 50Hz Crossover Frequency 1.8kHz Dimensions (mm)(H * W * D) 296 * 194 * 278 Stronger cabinet walls: The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance. Composite front baffle panel: The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units. Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole. Rear-firing twin reflex ports: The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale. Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing. Enhanced front grille with ‘invisible’ fixing: The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle. Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves. Neodymium-Powered Tweeter Mounted in Cast Alloy Surround: With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible. Blended SRBP Cone Surrounds: The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances. Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

WHAFERDALE DIAMOND 10.0 €. 95,00 Per prezzo scontato TELEFONA / E-MAIL

diffusore da scaffale,2 vie, bass reflex, woofer da 10 cm, 75 W

Format Stand Mount Bass/Mid Driver 100mm Tweeter 25mm Suitable Amplifier Power 15 - 75 w Nominal Impedance 6 Ω A/V Shielded yes Sensitivity (1W @ 1M) 86 dB Nominal Frequency Range 55-24kHz HF Limit (-10dB) 44kHz Freq. Fb 55Hz Crossover Frequency 2.5kHz Dimensions (mm)(H * W * D) 236 * 145 * 165 Stronger cabinet walls: The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance. Composite front baffle panel: The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units. Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole. Rear-firing twin reflex ports: The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale. Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing. Enhanced front grille with ‘invisible’ fixing: The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle. Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves. Neodymium-Powered Tweeter Mounted in Cast Alloy Surround: With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible. Blended SRBP Cone Surrounds: The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances. Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

WHAFERDALE DIAMOND 10.CM €.300,00 Per prezzo scontato TELEFONA / E-MAIL

Format Centre Bass Driver 2 X 165mm Midrange Driver 50mm Dome Tweeter 25mm Suitable Amplifier Power 30 - 200 w Nominal Impedance 6 Ω A/V Shielded yes Sensitivity (1W @ 1M) 90 dB Nominal Frequency Range 55-24kHz HF Limit (-10dB) 44kHz Freq. Fb 70Hz Crossover Frequency 1 / 6kHz Dimensions (mm)(H*W*D) 223*535*295 Height on spikes/feet (mm) 231 Stronger cabinet walls: The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance. Composite front baffle panel: The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units. Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole. Rear-firing twin reflex ports: The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale. Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing. Enhanced front grille with ‘invisible’ fixing: The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle. Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves. Neodymium-Powered Tweeter Mounted in Cast Alloy Surround: With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible. Blended SRBP Cone Surrounds: The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances. Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

WHAFERDALE DIAMOND 10.CS €.210,00 Per prezzo scontato TELEFONA / E-MAIL

WHAFERDALE DIAMOND 10.CC €.180,00 Per prezzo scontato TELEFONA / E-MAIL

WHAFERDALE DIAMOND 10.DSF €.95,00 Per prezzo scontato TELEFONA / E-MAIL

Format Surround Bass/Mid Driver 2 X 100mm Tweeter 2 X 25mm Suitable Amplifier Power 15 - 120W Nominal Impedance 6 Ω A/V Shielded no Sensitivity (1W @ 1M) 86 dB Nominal Frequency Range 70-24kHz HF Limit (-10dB) 44kHz Freq. Fb 80Hz Crossover Frequency 3.5kHz Dimensions (mm)(H*W*D) 280*290*132 Stronger cabinet walls: The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance. Composite front baffle panel: The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units. Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole. Rear-firing twin reflex ports: The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale. Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing. Enhanced front grille with ‘invisible’ fixing: The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle. Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves. Neodymium-Powered Tweeter Mounted in Cast Alloy Surround: With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible. Blended SRBP Cone Surrounds: The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances. Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

WHAFERDALE DIAMOND 10.SR €.90,00 Per prezzo scontato TELEFONA / E-MAIL

Format Surround Bass/Mid Driver 100mm Tweeter 25mm Suitable Amplifier Power 10 - 60 w Nominal Impedance 6 Ω A/V Shielded no Sensitivity (1W @ 1M) 88 dB Nominal Frequency Range 70-24kHz HF Limit (-10dB) 44kHz Freq. Fb 70Hz Crossover Frequency 2.2kHz Dimensions (mm)(H*W*D) 236*185*117 Stronger cabinet walls: The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance. Composite front baffle panel: The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units. Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole. Rear-firing twin reflex ports: The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale. Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing. Enhanced front grille with ‘invisible’ fixing: The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle. Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves. Neodymium-Powered Tweeter Mounted in Cast Alloy Surround: With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible. Blended SRBP Cone Surrounds: The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances. Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

WHAFERDALE DIAMOND 10SX €.330,00 Per prezzo scontato TELEFONA / E-MAIL

Bass Driver 1 x 200mm SUB USB 5V Output no Amplifier Power 100 W Line Input Sensitivity 200mv for 75W Avg. Max Output at 1 meter 107dB Boundary Response 40-110Hz Crossover Range 35-85Hz (6x10dB steps) Dimensions (mm)(H*W*D) 290*290*320 Height on spikes/feet (mm) 333

WHAFERDALE DIAMOND 10MX €.480,00 Per prezzo scontato TELEFONA / E-MAIL

Bass Driver 1 x 250mm SUB USB 5V Output yes Amplifier Power 150 W Line Input Sensitivity 200mv for 75W Avg. Max Output at 1 meter 110dB Boundary Response 35-110Hz Crossover Range 35-85Hz (6x10dB steps) Dimensions (mm)(H*W*D) 330*330*370 Height on spikes/feet (mm) 360

WHAFERDALE DIAMOND 10GX €.590,00 Per prezzo scontato TELEFONA / E-MAIL

Bass Driver 1 x 250mm SUB USB 5V Output no Amplifier Power 250 W Line Input Sensitivity 325mv for 150W Avg. Max Output at 1 meter 113dB Boundary Response 30-100Hz Crossover Range 35-85Hz (6x10dB steps) Dimensions (mm)(H*W*D) 420*420*375 Height on spikes/feet (mm) 478

SERIE VARDUS

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

WHAFERDALE VARDUS VR-50 €. 60,00 Per prezzo scontato TELEFONA / E-MAIL

The Vardus offers serious sound pressure levels from even small amplifiers or systems and are capable of producing 90db at a distance of 1 meter for 1 watt of music power. Combine this with total tonal matching and you have the recipe for a highly competitive AV system.Damping and extended voice-coil: Completely controlled even under extreme dynamics, the advanced voice coils allow the cone to travel to the full 24mm maximum excursion with a linear pistonic motion. High frequency tweeter: Capable of scaling up to 24 KHz within 3db of mean these improvements in stereo image are pronounced and create extremely impressive soundstage and dispersion. Many loudspeakers are directional in nature, the listening position or “sweetspot” is very small and the slightest movements result in a change to the perceived sound, not with the Vardus. The disperse nature of high frequency sounds give a very consistent image across a very wide sound field. This benefit is even more so when used as part of an AV multi-channel system.
Format Stand: Ported Bass Unit 100mm Tweeter 25mm Suitable Amplifier Power 10 - 100W Nominal Impedance 6 Ω Shielded Yes Sensitivity (1W @ 1M) 86dB Frequency Response -6dB 65Hz - 20kHz Dimensions (mm)(H*W*D) 296*194*200

WHAFERDALE VARDUS VR-100 €. 90,00 Per prezzo scontato TELEFONA / E-MAIL

The Vardus offers serious sound pressure levels from even small amplifiers or systems and are capable of producing 90db at a distance of 1 meter for 1 watt of music power. Combine this with total tonal matching and you have the recipe for a highly competitive AV system.Damping and extended voice-coil: Completely controlled even under extreme dynamics, the advanced voice coils allow the cone to travel to the full 24mm maximum excursion with a linear pistonic motion. High frequency tweeter: Capable of scaling up to 24 KHz within 3db of mean these improvements in stereo image are pronounced and create extremely impressive soundstage and dispersion. Many loudspeakers are directional in nature, the listening position or “sweetspot” is very small and the slightest movements result in a change to the perceived sound, not with the Vardus. The disperse nature of high frequency sounds give a very consistent image across a very wide sound field. This benefit is even more so when used as part of an AV multi-channel system. Spec Enclosure Type ported BASS 6 TWEETER 25mm TEX NOMINAL IMPEDANCE 6ohm DIMENSIONS 365 x 223 x 220 Freq Range at -6 dB 60 - 20 khz SPL 1W @ 1M 87dB Recommend Amp 10 - 100W

WHAFERDALE VARDUS VR-200 €. 120,00 Per prezzo scontato TELEFONA / E-MAIL

The Vardus offers serious sound pressure levels from even small amplifiers or systems and are capable of producing 90db at a distance of 1 meter for 1 watt of music power. Combine this with total tonal matching and you have the recipe for a highly competitive AV system.Damping and extended voice-coil: Completely controlled even under extreme dynamics, the advanced voice coils allow the cone to travel to the full 24mm maximum excursion with a linear pistonic motion. High frequency tweeter: Capable of scaling up to 24 KHz within 3db of mean these improvements in stereo image are pronounced and create extremely impressive soundstage and dispersion. Many loudspeakers are directional in nature, the listening position or “sweetspot” is very small and the slightest movements result in a change to the perceived sound, not with the Vardus. The disperse nature of high frequency sounds give a very consistent image across a very wide sound field. This benefit is even more so when used as part of an AV multi-channel system. Spec. Enclosure Type ported BASS 6 TWEETER 25mm TEX NOMINAL IMPEDANCE 6ohms DIMENSIONS 800 x 223 x 220 Freq Range at -6 dB 55 - 20 khz SPL 1W @ 1M 88dB Recommend Amp 10 - 100 W

WHAFERDALE VARDUS VR-300 €. 140,00 Per prezzo scontato TELEFONA / E-MAIL

The Vardus offers serious sound pressure levels from even small amplifiers or systems and are capable of producing 90db at a distance of 1 meter for 1 watt of music power. Combine this with total tonal matching and you have the recipe for a highly competitive AV system.Damping and extended voice-coil: Completely controlled even under extreme dynamics, the advanced voice coils allow the cone to travel to the full 24mm maximum excursion with a linear pistonic motion. High frequency tweeter: Capable of scaling up to 24 KHz within 3db of mean these improvements in stereo image are pronounced and create extremely impressive soundstage and dispersion. Many loudspeakers are directional in nature, the listening position or “sweetspot” is very small and the slightest movements result in a change to the perceived sound, not with the Vardus. The disperse nature of high frequency sounds give a very consistent image across a very wide sound field. This benefit is even more so when used as part of an AV multi-channel system. Spec Enclosure Type ported BASS 6 TWEETER 25mm TEX NOMINAL IMPEDANCE 6ohms DIMENSIONS 860 x 223 x 255 Mid - Range 6 Freq Range at -6 dB 50 - 20 khz SPL 1W @ 1M 88dB Recommend Amp 10 - 120W

WHAFERDALE VARDUS VR-400 €. 170,00 Per prezzo scontato TELEFONA / E-MAIL

The Vardus offers serious sound pressure levels from even small amplifiers or systems and are capable of producing 90db at a distance of 1 meter for 1 watt of music power. Combine this with total tonal matching and you have the recipe for a highly competitive AV system.Damping and extended voice-coil: Completely controlled even under extreme dynamics, the advanced voice coils allow the cone to travel to the full 24mm maximum excursion with a linear pistonic motion. High frequency tweeter: Capable of scaling up to 24 KHz within 3db of mean these improvements in stereo image are pronounced and create extremely impressive soundstage and dispersion. Many loudspeakers are directional in nature, the listening position or “sweetspot” is very small and the slightest movements result in a change to the perceived sound, not with the Vardus. The disperse nature of high frequency sounds give a very consistent image across a very wide sound field. This benefit is even more so when used as part of an AV multi-channel system. SpecEnclosure Type ported BASS 6 TWEETER 25mm TEX NOMINAL IMPEDANCE 6ohms DIMENSIONS 920 x 223 x 255 Mid - Range 6 Freq Range at -6 dB 40 - 20 khz SPL 1W @ 1M 90dB Recommend Amp 10 - 150W

WHAFERDALE VARDUS VR-C1 €. 120,00 Per prezzo scontato TELEFONA / E-MAIL

The Vardus offers serious sound pressure levels from even small amplifiers or systems and are capable of producing 90db at a distance of 1 meter for 1 watt of music power. Combine this with total tonal matching and you have the recipe for a highly competitive AV system.Damping and extended voice-coil: Completely controlled even under extreme dynamics, the advanced voice coils allow the cone to travel to the full 24mm maximum excursion with a linear pistonic motion. High frequency tweeter: Capable of scaling up to 24 KHz within 3db of mean these improvements in stereo image are pronounced and create extremely impressive soundstage and dispersion. Many loudspeakers are directional in nature, the listening position or “sweetspot” is very small and the slightest movements result in a change to the perceived sound, not with the Vardus. The disperse nature of high frequency sounds give a very consistent image across a very wide sound field. This benefit is even more so when used as part of an AV multi-channel system. Spec Enclosure Type ported Bass 4 Tweeter 25mmTEX Nominal Impedance 6ohms Dimensions 148 x 385 x 130 Freq Range at -6 dB 80 - 20 khz SPL 1W @ 1M 89dB Recommend Amp 10 - 100W

WHAFERDALE VARDUS VR-S1 €. 55,00 Per prezzo scontato TELEFONA / E-MAIL

The Vardus offers serious sound pressure levels from even small amplifiers or systems and are capable of producing 90db at a distance of 1 meter for 1 watt of music power. Combine this with total tonal matching and you have the recipe for a highly competitive AV system.Damping and extended voice-coil: Completely controlled even under extreme dynamics, the advanced voice coils allow the cone to travel to the full 24mm maximum excursion with a linear pistonic motion. High frequency tweeter: Capable of scaling up to 24 KHz within 3db of mean these improvements in stereo image are pronounced and create extremely impressive soundstage and dispersion. Many loudspeakers are directional in nature, the listening position or “sweetspot” is very small and the slightest movements result in a change to the perceived sound, not with the Vardus. The disperse nature of high frequency sounds give a very consistent image across a very wide sound field. This benefit is even more so when used as part of an AV multi-channel system.Spe Enclosure Type ported Freq Range at -6 dB 110 - 20khz SPL 1W @ 1M 87 dB Recommend Amp 10-100W Bass 3 Tweeter 22mm PEI Nominal Impedance 6ohms Dimensions 150 x 115 x 110

WHAFERDALE VARDUS VR-SUB€. 290,00 Per prezzo scontato TELEFONA / E-MAIL

The Vardus offers serious sound pressure levels from even small amplifiers or systems and are capable of producing 90db at a distance of 1 meter for 1 watt of music power. Combine this with total tonal matching and you have the recipe for a highly competitive AV system.Damping and extended voice-coil: Completely controlled even under extreme dynamics, the advanced voice coils allow the cone to travel to the full 24mm maximum excursion with a linear pistonic motion. High frequency tweeter: Capable of scaling up to 24 KHz within 3db of mean these improvements in stereo image are pronounced and create extremely impressive soundstage and dispersion. Many loudspeakers are directional in nature, the listening position or “sweetspot” is very small and the slightest movements result in a change to the perceived sound, not with the Vardus. The disperse nature of high frequency sounds give a very consistent image across a very wide sound field. This benefit is even more so when used as part of an AV multi-channel system. Enclosure Type reflex Woofer 10 Amplifier Power 150w Line Input Sensitivity 300mv for 100w Average Max SPL 110db Crossover Range 35Hz - 85Hz Volume 31L Frequency Cab Fb 45 Dimensions 400 x 350 x 380

SERIE CRYSTAL2Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

WHAFERDALE CRYSTAL2 CR2-8 €. 60,00 Per prezzo scontato TELEFONA / E-MAIL

CRYSTAL 2<< Back to Product Series PageGood hi-fi should accurately reproduce the music signal without adding or removing anything. An overblown bass or emphasized treble can sound impressive in the demonstration room, but will quickly fatigue the human ear. The best balance is to be found in nature – an even and flat response that sounds, first and foremost, ‘natural’.It is with this in mind that Crystal II has been developed. A neutral balance, capable of releasing the real beauty of music without added emphasis or colouration is the aim. A natural performance, relaxing and absorbing in its clarity and fluidity is the result.Crystal II is for those that value good music and delivery rather than ponderous bass and ear-splitting high-frequencies. Our aim is not to ‘instantly’ impress, but to manufacture loudspeakers which deliver consistently high standards of reproduction in a way this is enjoyable for years to come.SpecNominal Impedance 6 Ω Recommended Amplifier Power 25 - 60 Watts Sensitivity (1W @ 1M) 84dB Frequency Response 60 - 20kHz Bass Unit 100mm Treble Unit 25mm Textile Dimensions (mm)(H*W*D) 207*149*160

WHAFERDALE CRYSTAL2 CR2-10 €. 70,00 Per prezzo scontato TELEFONA / E-MAIL

WHAFERDALE CRYSTAL2 CR2-20 €. 95,00 Per prezzo scontato TELEFONA / E-MAIL

WHAFERDALE CRYSTAL2 CR2-30 €.130,00 Per prezzo scontato TELEFONA / E-MAILCRYSTAL 2<< Back to Product Series PageGood hi-fi should accurately reproduce the music signal without adding or removing anything. An overblown bass or emphasized treble can sound impressive in the demonstration room, but will quickly fatigue the human ear. The best balance is to be found in nature – an even and flat response that sounds, first and foremost, ‘natural’.It is with this in mind that Crystal II has been developed. A neutral balance, capable of releasing the real beauty of music without added emphasis or colouration is the aim. A natural performance, relaxing and absorbing in its clarity and fluidity is the result.Crystal II is for those that value good music and delivery rather than ponderous bass and ear-splitting high-frequencies. Our aim is not to ‘instantly’ impress, but to manufacture loudspeakers which deliver consistently high standards of reproduction in a way this is enjoyable for years to come.

WHAFERDALE CRYSTAL2 CR2-40 €.170,00 Per prezzo scontato TELEFONA / E-MAIL

WHAFERDALE CRYSTAL2 CR2-CENTER €.120,00 Per prezzo scontato TELEFONA / E-MAIL

WHAFERDALE CRYSTAL2 CR2-SUB €.320,00 Per prezzo scontato TELEFONA / E-MAIL

SERIE MOVIESTARTelefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

WHAFERDALE MOVIESTAR 65+ €.350,00 Per prezzo scontato TELEFONA / E-MAIL

SERIE POWER CUBETelefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

WHAFERDALE POWER CUBE 8+ €.290,00 Per prezzo scontato TELEFONA / E-MAIL

WHAFERDALE POWER CUBE 10+ €.350,00 Per prezzo scontato TELEFONA / E-MAIL

WHAFERDALE POWER CUBE 12+ €.390,00 Per prezzo scontato TELEFONA / E-MAIL

WHAFERDALE POWER CUBE SW380 €.1.500,00 Per prezzo scontato TELEFONA / E-MAIL

SERIE WH & DFSTelefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

WHAFERDALE WH-2 SOURROUND €. 55,00 Per prezzo scontato TELEFONA / E-MAIL

Diffusore surround bipolare, 2 vie, 2 woofer da 10 cm, 100

WHAFERDALE WH-2 CENTRE €. 80,00 Per prezzo scontato TELEFONA / E-MAIL

Diffusore centrale, 2 vie, 2 woofer da 10 cm, 100 W

WHAFERDALE WH-20 SOURROUND €. 75,00 Per prezzo scontato TELEFONA / E-MAIL

Diffusore surround bipolare, 2 vie, 2 woofer da 13 cm, 150 W

WHAFERDALE WH-20 CENTRE €.110,00 Per prezzo scontato TELEFONA / E-MAIL

Diffusore centrale, 2 vie, 2 woofer da 13 cm, 150 W

WHAFERDALE DFS-18 €. 80,00 Per prezzo scontato TELEFONA / E-MAIL

diffusore surround bipolari, 2 vie, 2 woofer da 10 cm, 120 W

WHAFERDALE DFS-21 €. 90,00 Per prezzo scontato TELEFONA / E-MAIL

diffusore surround bipolari, 2 vie, 2 woofer da 13 cm, 200

Legenda istruzioni

Clicca per qui per vedere : FOTO PRODOTTO

Clicca per qui per vedere : ISTRUZIONI PRODOTTO

Clicca per qui per vedere : CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO

Clicca per qui per vedere : DATI TECNICI SPECIFICHE PRODOTTO

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

Attenzione

Per ordinare o avere gli ultimi prezzi aggiornati telefona al 0174 670100 o invia un E-mail a info@sinergy.us

Il presente listino sostituisce ed annulla ogni precedente.I prezzi indicati si riferiscono a singolo diffussore.
Le caratteristiche e i prezzi indicati possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati. Prezzi franco nostro magazzino.
Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici