HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 


Ortofon, brand danese di antica tradizione e grande capacitŕ innovativa nel settore della lettura fonografica hi-fi.Ortofon viene fondata il 9 ottobre del 1918 come Electrical Phono Film Company da Axel Petersen e Arnold Poulsen. La loro iniziale attivitŕ č lo sviluppo del primo sistema di sincronizzazione sonora cinematografica al mondo.Diventa Fonofilm Industri A/S nel 1946, a fine guerra e subito sviluppa il primo tornio per incisioni di lacche fonografiche monofoniche al mondo. La risposta delle registrazioni giŕ puň raggiungere i 14kHz, dai 5kHz delle macchine fin lě prodotte.E' il 1948 quando viene ingegnerizzata la prima testina a bobina mobile al mondo in grado di rivaleggiare con la qualitŕ delle migliori registrazioni all'epoca disponibili.Nel 1951 nasce la Ortofon A/S, filiazione commerciale della Fonofilm Industri A/S. La scelta del nome ortofon deriva dalla crasi delle due parole greche "orto" (corretto) e "fon" (suono).Nel 1957 Ortofon sviluppa il suo primo tornio da incisione stereofonico. Negli anni a seguire, con lo sviluppo della produzione discografica, viene messa a punto e commercializzata - dapprima solo per i professionisti (fu adottata sin da subito dalla radio di stato danese, svedese e dalla etichetta discografica Deutsche Grammophon) - la leggendaria SPU tutt'ora in produzione in diversi allestimenti.Oggi Ortofon, nonostante la dilagante ed onnipresente tecnologia digitale, era e rimane il punto di riferimento piů qualificato, affidabile e variegato dell'intero mondo che ruota assieme al Disco Nero.


Moving Magnet Ortofon has designed and manufactured magnetic cartridges since 1969. In providing an economic alternative to the renowned Ortofon moving coil cartridges, the magnetic models have established a firm position for themselves among music lovers and audiophiles all over the world. Naturally, the magnetic cartridges also benefit from Ortofon's research and experience in transducer technology. Sophisticated styli, light and rigid cantilevers, and advanced magnetic circuitry have produced a level of quality which is state-of-the-art within the magnetic category.

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


   

 

 

 

ORTOFON OM 1S                                          Listino  ufficiale  €.    50,00

 

Stilo sferico. Tensione di uscita 4,5mV. Peso di lettura consigliato 1,75gr. Resistenza   di carico consigliata 47Kohm. Peso 5gr.

ORTOFON OM 5E                                          Listino  ufficiale  €.    70,00

 

Stilo ellittico. •Tensione di uscita 4mV.•Peso di lettura consigliato 1,75gr.•Resistenza di carico consigliata 47Kohm.•Peso 5gr

OM 5E The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications. TECHNICAL DATA  Output voltage at 1000 Hz, 5cm/sec. 4 mV Channel balance at 1 kHz 2 dB Channel separation at 1 kHz 22 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-25.000 Hz Frequency response 20-20.000 Hz ± 2 dB Tracking ability at 315Hz at recommended tracking force *) 65 µm Compliance, dynamic, lateral 20 µm/mN Stylus type Elliptical Stylus tip radius r/R 8/18 µm Tracking force range 1,5-2,0 g (15-20 mN) Tracking force, recommended 1,75 g (17,5 mN) Tracking angle 20° Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pFCartridge colour, body/stylus Black/BlackCartridge weight 5 g Replacement stylus unit Stylus 5 E *) Typical value


 


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


ORTOFON  2M RED                                       Listino  ufficiale  €.   110,00

 

Stilo ellittico. •Tensione di uscita 5,5mV.•Peso di lettura consigliato 1,8gr.•Resistenza di carico consigliata 47Kohm.•Corpo in Lexan DMX.•Peso 7,2gr

Versione 2M RED Verso Come 2M RED, ma con attacchi a vite studiati per i bracci con montaggio della testina dal basso 120,00  euro

Versione 2M RED PnP Come 2M RED, premontata su headshell con attacchi a baionetta per installazione plug-n-play  160,00  euro 

2M Red - The 2M series were developed in conjunction with Danish designer Mřller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.  Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.The 2M series of cartridges feature Ortofon’s trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Red uses an improved engine, which provides an increased output of 5.5mV. 2M red features a tipped elliptical diamond. TECHNICAL DATA  Output voltage at 1000 Hz, 5cm/sec. 5,5 mV Channel balance at 1 kHz 1,5 dBChannel separation at 1 kHz 22 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-22.000 Hz Frequency response 20-20.000 Hz + 3 / - 1 dBTracking ability at 315Hz at recommended tracking force 70 µm Compliance, dynamic, lateral 20 µm/mNStylus type EllipticalStylus tip radius r/R 8/18 µm Tracking force range 1,6-2,0g (16-20 mN) Tracking force, recommended 1,8 g (18 mN) Tracking angle 20° Internal impedance, DC resistance 1,3 kOhm Internal inductance 700 mH Recommended load resistance 47 kOhm Recommended load capacitance 150-300 pF Cartridge colour, body/stylus Black/Red Cartridge weight 7,2 g Replacement stylus unit 2M Red


ORTOFON  2M BLUE                                     Listino  ufficiale  €.   220,00

 

Stilo nude ellittico. •Tensione di uscita 5,5mV.•Peso di lettura consigliato 1,8gr.•Resistenza di carico consigliata 47Kohm.•Corpo in Lexan DMX.•Peso 7,2gr.

VERSIONE 2M BLUE Verso Come 2M BLU, ma con attacchi a vite studiati per i bracci con montaggio della testina dal basso 230,00  euro

VERSIONE BLUE PnP Come 2M BLU, premontata su headshell con attacchi a baionetta per installazione plug-n-play 270,00  euro

2M Blue - The 2M series were developed in conjunction with Danish designer Mřller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.  The 2M series of cartridges feature Ortofon’s trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Blue uses an improved engine, which provides an increased output of 5.5mV.  TECHNICAL DATA Output voltage at 1000 Hz, 5cm/sec. 5,5 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 25 dB  Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-25.000 Hz Frequency response 20-20.000 + 2 / - 1 dB Tracking ability at 315Hz at recommended tracking force 80 µm Compliance, dynamic, lateral 20 µm/mN Stylus type Nude Elliptical Stylus tip radius r/R 8/18 µm Tracking force range 1,6-2,0g (16-20 mN) Tracking force, recommended 1,8 g (18 mN)  Tracking angle 20°  Internal impedance, DC resistance 1,3 kOhm  Internal inductance 700 mH  Recommended load resistance 47 kOhm  Recommended load capacitance 150-300 pF  Cartridge colour, body/stylus Black/Blue Cartridge weight 7,2 g Replacement stylus unit 2M Blue

ORTOFON  2M BRONZE                                  Listino  ufficiale  €.   360,00

 

Stilo nude fine line. •Tensione di uscita 5mV.•Peso di lettura consigliato 1,5gr.•Resistenza di carico consigliata 47Kohm.•Corpo in Lexan DMX.•Peso 7,2gr.

VERSIONE 2M BRONZE Verso Come 2M BRONZE, ma con attacchi a vite studiati per i bracci con montaggio della testina dal basso 370,00   euro

VERSIONE 2M BRONZE PnP Come 2M BRONZE, premontata su headshell con attacchi a baionetta per installazione plug-n-play 410,00  euro

2M Bronze - The 2M series were developed in conjunction with Danish designer Mřller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.  The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear. The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. TECHNICAL DATA  Output voltage at 1000 Hz, 5cm/sec. 5 mV  Channel balance at 1 kHz 1 dB Channel separation at 1 kHz 26 dB  Channel separation at 15 kHz 15 dB  Frequency range at - 3dB 20-29.000 Hz  Frequency response 20-20.000 + 2 / - 0 dB  Tracking ability at 315Hz at recommended tracking force 80 µm  Compliance, dynamic, lateral 22 µm/mN  Stylus type Nude Fine Line  Stylus tip radius r/R 8/40 µm  Tracking force range 1,4-1,7g (14-17 mN)  Tracking force, recommended 1,5 g (15 mN)  Tracking angle 20°  Internal impedance, DC resistance 1,2 kOhm  Internal inductance 630 mH  Recommended load resistance 47 kOhm  Recommended load capacitance 150-300 pF  Cartridge colour, body/stylus Black/Bronze  Cartridge weight 7,2 g  Replacement stylus unit 2M Bronze

ORTOFON  2M BLACK                                    Listino  ufficiale  €.   600,00

 

Stilo nude fine line. •Tensione di uscita 5mV.•Peso di lettura consigliato 1,5gr.•Resistenza di carico consigliata 47Kohm.•Corpo in Lexan DMX.•Peso 7,2gr.

VERSIONE 2M BLACK Verso Come 2M BLACK, ma con attacchi a vite studiati per i bracci con montaggio della testina dal basso 610,00  euro

VERSIONE 2M BLACK PnP Come 2M BLACK, premontata su headshell con attacchi a baionetta per  installazione plug-n-play. 650,00  euro

2M Black - The 2M series were developed in conjunction with Danish designer Mřller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. The 2M Black is the new moving magnet flagship from Ortofon. The 2M black is graced with a Shibata diamond stylus – the same diamond as on the acclaimed MC Jubilee. Its slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information. Users of the 2M Black will enjoy the benefit of impeccable sound quality, along with reduced record & stylus wear and reduced distortion and phase error as a result of the diamond’s improved tracking geometry.The cartridge body used for the 2M Black is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. TECHNICAL DATA  Output voltage at 1000 Hz, 5cm/sec. 5 mV  Channel balance at 1 kHz 1 dB  Channel separation at 1 kHz 26 dB  Channel separation at 15 kHz 15 dB  Frequency range at - 3dB 20-31.000 Hz  Frequency response 20-20.000 + 2 / - 0 dB  Tracking ability at 315Hz at recommended tracking force 80 µm  Compliance, dynamic, lateral 22 µm/mN  Stylus type Nude Shibata  Stylus tip radius r/R 6/50 µm  Tracking force range 1,4-1,7g (14-17 mN)  Tracking force, recommended 1,5 g (15 mN)  Tracking angle 20°  Internal impedance, DC resistance 1,2 kOhm  Internal inductance 630 mH  Recommended load resistance 47 kOhm  Recommended load capacitance 150-300 pF Cartridge colour, body/stylus Black/Black  Cartridge weight 7,2 g Replacement stylus unit 2M Black

 

 

ORTOFON  2M 78                                         Listino  ufficiale  €.   115,00

 

Stilo sferico. Tensione di uscita 4mV (mono). Peso di lettura consigliato 1,8gr. Resistenza di carico consigliata 47Kohm. Peso 7,2gr

Versione  2M 78 Verso Come 2M 78, ma con attacchi a vite studiati per i bracci con montaggio della testina dal basso 125,00  euro

Versione 78 PnP Come 2M 78,premontata su headshell con attacchi a baionetta per installazione plugn- play. 165,00   euro

 

ORTOFON  2M MONO                                    Listino  ufficiale  €.   320,00

 

Stilo sferico nude. Tensione di uscita 4mV (mono). Peso di lettura consigliato 1,8gr. Resistenza di carico consigliata 47Kohm. Peso 7,2gr

Versione  2M MONO Verso Come 2M MONO, ma con attacchi a vite studiati per i bracci con montaggio della testina dal basso  330,00 euro

Versione 2M MONO PnP Come 2M MONO,premontata su headshell con attacchi a baionetta per installazione plug-n-play.  370,00  euro


Moving Coil Nothing demonstrates more convincingly Ortofon´s commitment to be the world´s last cartridge manufacturer than the ongoing development of new state-of-the-art models, and Ortofon will continue to refine upon the level of sound quality attainable from analogue recordings. Since 1948 Ortofon has introduced about 100 different moving coil models, and more are to follow. Contrary to other types of phono catridges, the moving coil principle is not suited for mass production. Each of the four coils contains between 11 an 24 turns of wire, depending on model, and has to be wound by hand under a microscope. The wire itself is much thinner than a human hair. The high degree of craftsmanship involved is one of the "secrets" behind Ortofon's reput

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


ORTOFON  QUINTET RED                               Listino  ufficiale  €.   299,00

 

Stilo ellittico, bobina in rame. Tensione di uscita 0,5mV. Peso di lettura consigliato 2,3gr. Impedenza di carico consigliata >20 ohm. Corpo in lega ABS/Alluminio di colore rosso. Peso 9gr

ORTOFON  QUINTET BLUE                             Listino  ufficiale  €.   430,00

 

Stilo nude ellittico, bobina in argento puro 4-nines. Tensione di uscita 0,5mV. Peso di  lettura consigliato 2,3gr. Impedenza di carico consigliata >20 ohm. Corpo in lega ABS/Alluminio di colore blu. Peso 9gr.

ORTOFON  QUINTET BRONZE                         Listino  ufficiale  €.   630,00

 

Stilo nude fine line, bobina in argento puro 4-nines. Tensione di uscita 0,3mV. Peso di lettura consigliato 2,3gr. Impedenza di carico consigliata >20 ohm. Corpo in lega ABS/Alluminio di colore bronzo. Peso 9gr

ORTOFON  QUINTET BLACK S                           Listino  ufficiale  €.   830,00

 

Stilo nude Shibata, bobina in aucurum e cantilever in boro. Tensione di uscita 0,3mV.  Peso di lettura consigliato 2,3gr. Impedenza di carico consigliata >20 ohm. Corpo in lega ABS/Alluminio di colore nero. Peso 9gr

ORTOFON  QUINTET MONO                            Listino  ufficiale  €.   490,00

 

Stilo nude ellittico, bobina in argento puro 4-nines. Tensione di uscita 0,3mV. Peso di lettura consigliato 2,3gr. Impedenza di carico consigliata >20 ohm. Corpo in lega ABS/Alluminio di colore bianco. Peso 9gr.

ORTOFON  CADENZA MONO                               Listino  ufficiale  €.  1.090,00

 

Stilo nude fine line, cantilever in alluminio. •Tensione di uscita 450µV.•Peso di lettura consigliato 2,5gr.•Impedenza di carico consigliata 50-500 ohm.•Corpo in alluminio.•Peso 10,7gr.

Cadenza Mono  The Cadenza Mono model is made with a nude fine line stylus and a cylindrical aluminium cantilever. For easy use the pins are connected so you get the same signal from both pairs of connecting pins. The stylus radius is r/R 8/40 µm. Sharing internal build with the Cadenza Red and with optimized adjustments for mono playback the sound is relaxed, homogeneous and moderate. Find your old records as well as new micro groove mono records and experience the Cadenza Mono. Technical Data Value Output voltage at 1 kHz 5 cm/sec 450 μV  Frequency range at -3 dB 20 Hz - 50 kHz  Frequency response 20 Hz - 20 kHz -3  Tracking ability at 315 Hz at recommended tracking force *) 70 μm  Compliance, dynamic, lateral 12 μm/mN  Stylus type Nude fine line, Al. cantilever  Stylus tip radius r/R 8/40  Tracking force range 2,2-2,7 g (22-27 mN)  Tracking force recommended 2,5 g (25 mN)  Tracking angle 20ş  Internal impedance, DC resistance 5 Ohm  Recommended load impedance 50-500 Ohm  Cartridge body material Stainless steel Aluminium  Cartridge colour Natural/Black  Cartridge weight 10,7 g

ORTOFON  CADENZA RED                                  Listino  ufficiale  €.  1.090,00

 

Stilo nude fine line, cantilever in alluminio. •Tensione di uscita 450µV.•Peso di lettura consigliato 2,5gr.•Impedenza di carico consigliata 50-500 ohm.•Corpo in alluminio.•Peso 10,7gr.

Cadenza Red The Cadenza Red model is using a nude fine line stylus with a cylindrical aluminium cantilever. The stylus tip radius is r/R 8/40 µm. The coils are made from 6NX (99.9999 %) pure silver wire. An improved winding process on the armature allows a better channel balance. The sound picture of Cadenza Red is more relaxed, homogeneous and moderately dynamic in the perspective compared to the Cadenza Blue and have great space and depth in the stereo image.Technical Data Values  Output voltage at 1 kHz 5 cm/sec 450 μV  Channel balance < 1,5 dB Channel separation at 1 kHz > 23 dB  Channel separation at 15 kHz > 15 dB  Frequency range at -3 dB 20 Hz - 50 kHz  Frequency response 20 Hz - 20 kHz -3  Tracking ability at 315 Hz at recommended tracking force *) 80 μm  Compliance, dynamic, lateral 12 μm/mN  Stylus type Nude fine line, Al. cantilever  Stylus tip radius r/R 8/40  Tracking force range 2,2-2,7 g (22-27 mN)  Tracking force recommended 2,5 g (25 mN)  Tracking angle 20ş  Internal impedance, DC resistance 5 Ohm  Recommended load impedance 50-500 Ohm  Cartridge body material Stainless steel Aluminium  Cartridge colour Red/Black  Cartridge weight 10,7 g

ORTOFON  CADENZA RED                                  Listino  ufficiale  €.  1.590,00

 

Stilo nude FG70, cantilever in rubino. •Tensione di uscita 500µV.•Peso di lettura consigliato 2,5gr.•Impedenza di carico consigliata 50-200 ohm.•Corpo in alluminio.•Peso 10,7gr.

Cadenza Blue  The Cadenza Blue model is using a Nude FG 70 stylus with a very thin ruby cantilever. The improved winding process on the armature ensures better channel balance. The soundstage of Cadenza Blue is wide open and grandiose straight out of the box. Micro dynamic and ambience will be evident when listening to complex compositions. It reaches a very high degree of definition in the perspective, which is very present. It is true to the music with a tremendous clarity.Technical Data Values Output voltage at 1 kHz 5 cm/sec 500 μV Channel balance < 1,2 dB Channel separation at 1 kHz > 23 dB Channel separation at 15 kHz > 15 dB Frequency range at -3 dB 20 Hz - 50 kHz Frequency response 20 Hz - 20 kHz -2 Tracking ability at 315 Hz at recommended tracking force *) 80 μm Compliance, dynamic, lateral 12 μm/mN Stylus type Nude FG 70, Ruby cantilever  Stylus tip radius r/R 6/70  Tracking force range 2,2-2,7 g (22-27 mN)  Tracking force recommended 2,5 g (25 mN)  Tracking angle 20ş Internal impedance, DC resistance 5 Ohm  Recommended load impedance 50-200 Ohm  Cartridge body material Stainless steel Aluminium  Cartridge colour Blue/Black  Cartridge weight 10,7 g

ORTOFON  CADENZA BRONZE                             Listino  ufficiale  €.  1.890,00

 

Stilo nude Ortofon replicant, cantilever conico in alluminio. •Tensione di uscita 400µV.•Peso di lettura consigliato 2,5gr.•Impedenza di carico consigliata 50-200 ohm.•Corpo in alluminio.•Peso 10,7gr.

Cadenza Bronze  The Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. A Field Stabilizing Element, FSE, is used for optimal linearity especially during complex crescendo passages. Cadenza Bronze is a true high-end reference cartridge, conveying music with supreme precision, impact and dynamics. Its stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions.Technical Specifications Value  Output voltage at 1000 Hz, 5cm/sec. 400 μV Channel balance at 1 kHz < 1 dB  Channel separation at 1 kHz > 24 dB  Channel separation at 15 kHz > 20 dB  Frequency range at - 3dB 20 - 55 kHz  Frequency response 20 Hz - 20 kHz +1,5 Tracking ability at 315Hz at recommended tracking force *)80 µm Compliance, dynamic, lateral 12 µm/mN  Stylus type Nude Ortofon replicant,, conical aluminium  Stylus tip radius r/R 5/100 µm  Tracking force range 2,2-2,7 g (22-27 mN)  Tracking force, recommended 2,5 g (25 mN)  Tracking angle 23°  Internal impedance, DC resistance 5 Ohm  Recommended load impedance 50-200 Ohm  Cartridge body material Stainless steel / Aluminium Cartridge colour Bronze/Black  Cartridge weight 10,7 gram

ORTOFON  CADENZA BLACK                               Listino  ufficiale  €.  2.290,00

 

Stilo nude Shibata, cantilever in boro •Tensione di uscita 0,3mV.•Peso di lettura consigliato 2,3gr.•Impedenza di carico consigliata >10 ohm.•Corpo in alluminio.•Peso 10,7gr.

Cadenza Black  The Cadenza Black model is using a Nude Shibata stylus with a boron cantilever. The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod. This material is extremely stiff and even more lightweight than aluminium. It also uses the WRD (Wide Range Damping-system), controlling the high and low frequency damping separately. Cadenza Black is optimized for an amazing tonal neutrality, dynamics and purity of sound. It is high performing on areas like detail, consistency and sound staging.Technical Specifications Value  Output voltage at 1000 Hz, 5cm/sec. 0,3 mV Channel balance at 1 kHz < 0,8 dB Channel separation at 1 kHz > 27 dB  Channel separation at 15 kHz > 20 dB  Frequency range at - 3dB 20 - 60.000 Hz  Frequency response 20 Hz - 20 kHz +1,5/0  Tracking ability at 315Hz at recommended tracking force *) 90 µm  Compliance, dynamic, lateral 16 µm/mN  Stylus type Nude Shibata, Boron cantilever  Stylus tip radius r/R 6/50 µm  Tracking force range 2,0-2,5 g (20-25 mN) Tracking force, recommended 2,3 g (23 mN)  Tracking angle 20°  Internal impedance, DC resistance 5 Ohm  Recommended load impedance > 10 Ohm  Cartridge body material Stainless steel Aluminium Cartridge colour Black/Black Cartridge weight 10,7 gram


ORTOFON  WINDFELD Ti                                   Listino  ufficiale  €.  3.999,00

 

Stilo nude Ortofon replicant 100 special polished con cantilever in boro. Tensione di uscita 0,2mV. Peso di lettura consigliato 2,3gr. Impedenza di carico consigliata >10 ohm. Corpo in lega speciale titanio/acciaio. Peso 11gr.

Behind the MC Windfeld Historically, Ortofon has always followed its own path with regard to the mechanical design of the cartridge housing, because mechanical rigidity and total freedom from resonance in the audible range is a precondition for optimal sound quality. In the MC Windfeld, Ortofon continues to build on the structure of the Kontrapunkt range, in which the cartridge housing’s contact with the pick-up arm takes place through three hard, well-defined points, i.e. a kind of spikes. This means that the mechanical integration of the cartridge and the pick-up arm are always absolutely perfect. We have reinforced the construction by allowing one central structure, made in a special alloy, to reach from the 2.5 mm threaded holes at the top all the way down around the motor system at the bottom. This makes the MC Windfeld Ortofon’s strongest and most resonance-free cartridge yet, with a direct mechanical connection between the motor and the tonearm. What this means for the dynamics, resolution and richness of detail in the sound simply has to be experienced.But the Ortofon MC Windfeld is also unique in cosmetic terms: the parts of the cartridge housing are produced with matt and polished black surfaces. The underside facing the record is covered by a new shield, which reinforces the mechanical structure. Per Windfeld’s characteristic initials in gold, which decorate the sides of the cartridge housing, stand as a signal to the outside world that this technologically advanced cartridge is Ortofon’s finest, most accurate and in our own opinion also best-sounding design. We recommend a thorough listening test using the best equipment, and invite serious audiophiles to pay tribute to Per Windfeld with this serious candidate for “the world’s best cartridge”.MC WindfeldTechnical data Output voltage at 1000 Hz, 5cm/sec. 0,3 mVChannel balance at 1 kHz < 0,2 dBChannel separation at 1 kHz > 28 dBChannel separation at 15 kHz > 22 dBFrequency range at - 3dB 10-80.000 HzFrequency response FIM distortion at recommended 20-20.000 Hz + / - 1 dBTracking ability at 315Hz at recommended tracking force *)100 µm Compliance, dynamic, lateral 16 µm/mN Stylus type Nude Ortofon Replicant 100, special polished Stylus tip radius r/R 5/100 µm Tracking force range 2,3-2,8 g (23-28 mN) Tracking force, recommended 2,6 g (26 mN) Tracking angle 23° Internal impedance, DC resistance 4 Ohm Recommended load impedance > 10 Ohm Cartridge body material Stainless steel/special alloy Cartridge colour Black/Black Cartridge weight 13 gram

ORTOFON XPRESSION                                Listino  ufficiale  €.  4.999,00

 

Stilo nude Ortofon replicant 100 special polished. Cantilever in Boro. Tensione di uscita 0,3mV. Peso di lettura consigliato 2,6gr. Impedenza di carico consigliata >10 ohm. Corpo in lega speciale d'acciaio SLM e materiale composito proprietario TPE. Peso 28gr.

ORTOFON MC A95                                      Listino  ufficiale  €.  4.999,00

 

Testina celebrativa dei 95 anni di Ortofon. Stilo nude Ortofon replicant 100 special polished. Cantilever in Boro. Tensione di uscita 0,2mV. Peso di lettura consigliato 2,3gr. Impedenza di carico consigliata >10 ohm. Corpo in lega speciale di titanio SLM  e materiale composito proprietario TPE. Peso 6gr.

measured, making it a celebration of sound itself. This impeccably crafted cartridge carries with it the culmination of decades of research in the field of analogue sound reproduction along with the worldís best engineering, materials, and manufacturing techniques. Combined with the inspiration of the very best ears and minds in contemporary analogue technology, the A90 stands as a true contender for the best moving coil pickup of all time. Technical Data  Output voltage at 1 kHz, 5cm/sec. 270 µV Channel balance at 1 kHz < 0,2 dB  Channel separation at 1 kHz > 28 dB Channel separation at 15 kHz > 22 dB  Frequency range at - 3dB 10 Hz - 80 kHz  Frequency response 20 Hz - 20 kHz + / - 1 dB  Tracking ability at 315 Hz at recommended tracking force 100 µm  Compliance, dynamic, lateral 16 µm/mN  Stylus type Special polished Nude Ortofon  Replicant 100 on Boron Cantilever  Stylus tip radius r/R 5/100 µm  Tracking force range 2,0-2,5 g (20-25 mN)  Tracking force, recommended 2,3 g (23 mN)  Tracking angle 23°  Internal impedance, DC resistance 4 Ohm  Recommended load impedance > 10 Ohm  Cartridge body material SLM Stainless Steel  Cartridge colour Black

ORTOFON MC ANNA                                   Listino  ufficiale  €.  6.950,00

 

Testina Hi-End in onore della cantante di opera Anna Netrebko. Stilo nude Ortofon  replicant 100 special polished. Cantilever in Boro. Tensione di uscita 0,2mV. Peso dilettura consigliato 2,3gr. Impedenza di carico consigliata >10 ohm. Corpo in titanio con tecnica SLM. Peso 16gr.


TESTINE MC AD ALTA USCITA

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


ORTOFON MC-1 TURBO                                Listino  ufficiale  €.    220,00

 

Stilo ellittico. •Tensione di uscita 3,3mV.•Peso di lettura consigliato 2gr.•Impedenza di carico consigliata 47Kohm/<500pF.•Corpo in Noryl.•Peso 4,1gr.

MC-1 Turbo The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile. The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges. The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.Technical data  Output voltage at 1000 Hz, 5cm/sec. 3,3 mV         Channel balance at 1 kHz < 2 dB Channel separation at 1 kHz > 22 dB Channel separation at 15 kHz > 15 dB Frequency range at - 3dB 20-25.000 Hz Frequency response FIM distortion at recommended 20-20.000 Hz + 4 / - 1 dB Tracking ability at 315Hz at recommended tracking force *) > 65 µmCompliance, dynamic, lateral 13 µm/mN Stylus type Elliptical Stylus tip radius r/R 8/18 µm Tracking force range 1,8-2,2 g (18-22 mN) Tracking force, recommended 2 g (20 mN) Tracking angle 20° Internal impedance, DC resistance 100 Ohm Recommended load impedance 47 kOhm / < 500 pF Cartridge body material Noryl Cartridge colour Black Cartridge weight 4,1 g *) Typical value

ORTOFON MC-3 TURBO                                Listino  ufficiale  €.    380,00

 

Stilo nude fine line. •Tensione uscita 3,3mV.•Peso lettura consigliato 2gr.•Impedenza carico consigliata 47Kohm/<500pF.•Corpo in Noryl.•Peso 4,1gr.

MC-3 Turbo The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond. The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models. The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging. Technical data  Output voltage at 1000 Hz, 5cm/sec. 3,3 mV Channel balance at 1 kHz < 1,5 dB Channel separation at 1 kHz > 24 dB Channel separation at 15 kHz >15 dB Frequency range at - 3dB 20-30.000 Hz Frequency response FIM distortion at recommended 20-20.000 Hz + 4 / - 1 dB Tracking ability at 315Hz at recommended tracking force *) > 70 µm Compliance, dynamic, lateral 13 µm/mNStylus type Nude Fine LineStylus tip radius r/R 8/40 µmTracking force range 1,8-2,2 g (18-22 mN)Tracking force, recommended 2 g (20 mN)Tracking angle 20°Internal impedance, DC resistance 100 Ohm Recommended load impedance 47 kOhm / < 500 pFCartridge body material Noryl Cartridge colour Black Cartridge weight 4,1 g *) Typical value
 

ORTOFON X5-M                                          Listino  ufficiale  €.    495,00

 

Stilo nude FG70. •Tensione di uscita 2mV.•Peso di lettura consigliato 2gr.•Impedenza di carico consigliata 47Kohm/<500pF.•Corpo in Noryl.•Peso 4,1gr.

X5-MC  The X5-MC is our best high output moving coil (MC) cartridge, with a highly polished nude Fritz Gyger 70 diamond. The FG70 diamond resolves a very high level of detail, and can track even the highest frequency groove modulations. The X5-MC has a 2mV output, which although high enough to be used with moving magnet phono preamps, preserves the delicacy and accuracy that moving coil cartridges are known for.Technical data  Output voltage at 1000 Hz, 5cm/sec. 2 mV Channel balance at 1 kHz < 2 dB Channel separation at 1 kHz > 25 dB Channel separation at 15 kHz > 15 dB Frequency range at - 3dB 20-45.000 HzFrequency response FIM distortion at recommended 20-20.000 Hz + 3 / - 1,5 dB Tracking ability at 315Hz at recommended tracking force *) > 60 µm Compliance, dynamic, lateral 13 µm/mN Stylus type Nude FG 70 Stylus tip radius r/R 5/70 µm Tracking force range 1,8-2,2 g (18-22 mN) Tracking force, recommended 2 g (20 mN) Tracking angle 20° Internal impedance, DC resistance 80 OhmRecommended load impedance 47 kOhm / < 500 pFCartridge body material Noryl Cartridge colour Red Cartridge weight 4,1 g *) Typical value



Ortofon’s SPU cartridges continue the tradition of the first ever Moving Coil cartridges as originally engineered by Mr. Robert Gudmandsen and produced by Ortofon in the late 1950s. Praised for their refined linearity and full body, these cartridges have remained a favourite throughout the years, both for modern and vintage high-end applications. The latest incarnation of SPU cartridges feature a wood-based integrated headshell to further reduce resonance and provide an authentic and attractive aesthetic.

Telefona o invia un  e-mail per ordine el'ultimo prezzo   0174 670100 - info@newaudio.it -  Telefona o invia un  e-mail per ordine e  l'ultimo prezzo 0174 670100  info@newaudio.it


 

 

 

ORTOFON SPU #1 S                                    Listino  ufficiale  €.    545,00

 

Stilo sferico. Tensione di uscita 0,18mV. Peso di lettura consigliato 4gr. Impedenza di carico consigliata >10 ohm. Corpo in composito legno/resina. Peso 30gr

ORTOFON SPU #1 E                                    Listino  ufficiale  €.    545,00

 

Stilo ellittico. Tensione di uscita 0,18mV. Peso di lettura consigliato 4gr. Impedenza di  carico consigliata >10 ohm. Corpo in composito legno/resina. Peso 30gr

ORTOFON MONO CG25 DI MKII                           Listino  ufficiale  €.    790,00

 

Stilo sferico. •Tensione di uscita 1,5mV.•Peso di lettura consigliato 3,5gr.•Impedenza di carico consigliata >100 ohm.•Corpo in legno.•Peso 33gr.

Mono CG25 DI MkII The Mono CG 25 DI MKII is an SPU-style Moving Coil (MC) cartridge with a spherical stylus profile, for the playback of early 25µm mono recordings. The CG 25 DI MKII provides an authentic method of playing back these early vinyl recordings with a remarkable level of sonic accuracy. This cartridge features a 1.5mV output, which makes it suitable for use with a variety of medium-gain moving coil transformers. Technical data  Output voltage at 1000 Hz, 5cm/sec. 1,5 mVFrequency range at - 3dB 20-18.000 HzFrequency response FIM distortion at recommended 20-15.000 Hz + 3 / - 1 dB Tracking ability at 315Hz at recommended tracking force *) > 60 µmCompliance, dynamic, lateral Stylus type SphericalStylus tip radius R 25 µmTracking force range 3,0-4,0 g (30-40 mN) Tracking force, recommended 3,5 g (35 mN)Tracking angle 20°Internal impedance, DC resistance 6 OhmRecommended load impedance > 100 OhmCartridge body material Grinded wood Coilwire material High Purity Copper (OFC) Cartridge colour Black MCartridge weight 33 g *) Typical value

ORTOFON MONO CG65 DI MKII                           Listino  ufficiale  €.    790,00

 

Stilo sferico. •Tensione di uscita 1,5mV.•Peso di lettura consigliato 4,5gr.•Impedenza di carico consigliata >100 ohm.•Corpo in legno.•Peso 33gr.

Mono CG 65 DI MkII The Mono CG 65 DI MKII is an SPU-style Moving Coil (MC) cartridge with a spherical stylus profile, for the playback of early 65µm mono and 78rpm recordings. The CG 65 DI MKII provides an authentic method of playing back these early recordings with a remarkable level of sonic accuracy, regardless of the materials used to manufacture these discs. This cartridge features a 1.5mV output, which makes it suitable for use with a variety of medium-gain moving coil transformers. Technical data  Output voltage at 1000 Hz, 5cm/sec. 1,5 mVFrequency range at - 3dB 20-18.000 HzFrequency response FIM distortion at recommended 20-15.000 Hz + 3 / - 1 dBTracking ability at 315Hz at recommended tracking force *) > 60 µm Compliance, dynamic, lateral  Stylus type SphericalStylus tip radius R 65 µmTracking force range 4,0-5,0 g (40-50 mN) Tracking force, recommended 4,5 g (45 mN) Tracking angle 20°Internal impedance, DC resistance 6 OhmRecommended load impedance > 100 OhmCartridge body material Grinded wood Coilwire material High Purity Copper (OFC) Cartridge colour Black Cartridge weight 33 g *) Typical value

ORTOFON SPU MONO GM  MKII                          Listino  ufficiale  €.    820,00

 

Stilo sferico. •Tensione di uscita 3mV.•Peso di lettura consigliato 3,5gr.•Impedenza di carico consigliata 47Kohm.•Corpo in legno.•Peso 30gr.

SPU Mono GM MkII The SPU Mono GM MKII is a high output Moving Coil (MC) cartridge with a with a spherical stylus profile, for the playback of early 25µm mono recordings. The SPU Mono GM MKII provides an authentic method of playing back these early vinyl recordings with remarkable level of sonic accuracy, and its high output negates the need for a moving coil transformer.Technical data Output voltage at 1000 Hz, 5cm/sec. 3 mVFrequency range at - 3dB 20-20.000 HzFrequency response FIM distortion at recommended 20-15.000 Hz + 2 / - 1 dBTracking ability at 315Hz at recommended tracking force *) > 70 µmCompliance, dynamic, lateral 12 µm/mNStylus type SphericalStylus tip radius R 25 µmTracking force range 3,0-5,0 g (30-50 mN)Tracking force, recommended 3,5 g (35 mN) Tracking angle 20°Internal impedance, DC resistance 100 Ohm Recommended load impedance 47 kOhmCartridge body material Grinded wood Coilwire material High Purity Copper (OFC) Cartridge colour Black MCartridge weight 30 g *) Typical value

ORTOFON SPU CLASSIC GM  MKII                         Listino  ufficiale  €.    990,00

 

Stilo nude sferico. •Tensione di uscita 200µV.•Peso di lettura consigliato 4gr.•Impedenza di carico consigliata > 10 ohm.•Corpo in legno.•Peso 30gr.

VERSIONE SPU CLASSIC GM E MKII Stilo nude ellittico. •Tensione di uscita 200µV.•Peso di lettura consigliato 4gr.•Impedenza di carico consigliata > 10 ohm.•Corpo in legno.•Peso 30gr.

Classic GM MkII  The SPU Classic GM MKII, known for its dynamic and powerful sound reproduction, is a Moving Coil (MC) cartridge with an 18µm spherical stylus profile. The SPU Classic series embodies the essence of the original Moving Coils and are a perfect solution for the playback of both early and modern and contemporary stereo recordings. Techical dat  Output voltage at 1000 Hz, 5cm/sec. 200 µV Channel balance at 1 kHz < 1 dB Channel separation at 1 kHz > 20 dB Channel separation at 15 kHz > 10 dBFrequency range at - 3dB 20-25.000 HzFrequency response FIM distortion at recommended 20-20.000 Hz ± 3 dBTracking ability at 315Hz at recommended tracking force *) 65 µmCompliance, dynamic, lateral 8 µm/mNStylus type Nude sphericalStylus tip radius R 18 µmTracking force range 3,0-5,0 g (30-50 mN) Tracking force, recommended 4,0 g (40 mN)Tracking angle 20° Internal impedance, DC resistance 6 Ohm Recommended load impedance > 10 Ohm Cartridge body material Grinded wood Coilwire material High Purity Copper (OFC) Cartridge colour Black Cartridge weight 30 g *) Typical value

ORTOFON SPU MEISTER SILV. GM MKII                         Listino  ufficiale  €.  1.690,00

 

Stilo nude ellittico. •Tensione di uscita 300µV.•Peso di lettura consigliato 4gr.•Impedenza di carico consigliata > 10 ohm.•Corpo in alluminio.•Peso 32gr.

The SPU Meister Silver GM is an SPU Moving Coil (MC) cartridge that has been improved on coil winding material, stylus and magnet. The cartridge has been outfitted with high purity multi-conductor 6 – Nines silver wire (of a purity of 99,9999 %) for a more open and revealing high end presentation. The nude elliptical stylus tip mass has been decreased by a factor of more than 50%, resulting in increased tracking ability and reproduction of microdynamic detail. The generator system has been revised produce a slightly higher output to ensure compatibility with a wider range of moving coil transformers and active MC preamplifiers.Technical data Output voltage at 1000 Hz 5cm/sec 300 μV Channel balance at 1 kHz < 1 dB Channel separation at 1 kHz > 20 dB Channel separation at 15 kHz > 10 dB Frequency range at -3 dB 20-25 kHz Frequency response 20 - 20 kHz +2 / -1 dB Tracking ability at315 Hz at recommended tracking force *) > 70 μm Compliance, dynamic, lateral 8 μm/mN Stylus type Nude elliptical Stylus tip radius r/R 8/18 μm Equivalent stylus tip mass 0,45 mg Tracking force range 3.0-5.0 g (30-50 mN) Tracking force recommended 4.00 g (40 mN) Tracking angle 20ş Internal impedance, DC resistance 1.5 Ohm Recommended load impedance > 10 Ohm Cartridge body material Aluminium Cartridge colour Silver/Black Cartridge Weight 32 gram

 

 

ORTOFON SPU WOOD A                                          Listino  ufficiale  €.  1.790,00

 

Stilo sferico. Tensione di uscita 0,18mV. Peso di lettura consigliato 4gr. Impedenza di  carico consigliata > 10 ohm. Corpo in legno di faggio laccato con antica tecnica giapponese Urushi . Peso 31gr

ORTOFON SPU SYNERGY GM                                        Listino  ufficiale  €.  1.790,00

 

Stilo nude ellittico. •Tensione di uscita 500µV.•Peso di lettura consigliato 3gr.•Impedenza di carico consigliata 10-50 ohm.•Corpo in legno.•Peso 30gr.

SPU Synergy GM The SPU Synergy GM modernizes the classic SPU design with a number of optimizations designed for optimum compatibility and sonic purity. The SPU Synergy features a wood-based housing and has a revised generator system which allows for a maximum output of 500µV, relaxing the requirement for high gain transformer or active preamplification systems. While still making use of a highly polished Nude Elliptical stylus, the stylus tip mass has been reduced significantly, resulting in reduced VTF and higher tracking ability. Technical data Output voltage at 1000 Hz, 5cm/sec. 500 µV  Channel balance at 1 kHz < 1,5 dB  Channel separation at 1 kHz > 23 dB  Channel separation at 15 kHz > 15 dB Frequency range at - 3dB 20-30.000 Hz  Frequency response FIM distortion at recommended 20-20.000 Hz ± 2 dB  Tracking ability at 315Hz at recommended tracking force *) 70 µm Compliance, dynamic, lateral 8 µm/mN Stylustype Nude elliptical  Stylus tip radius r/R 8/18 µm  Tracking force range 2,5-3,5 g (25-35 mN)  Tracking force, recommended 3,0 g (30 mN)  Tracking angle 20°  Internal impedance, DC resistance 2 Ohm  Recommended load impedance 10 - 50 Ohm  Cartridge body material Grinded wood  Coilwire material Goldplated Silver  Cartridge colour Shiny Black  ,Cartridge weight 30 g  *) Typical value

ORTOFON SPU ROYAL GM MKII                                 Listino  ufficiale  €.  2.200,00

 

Stilo nude Ortofon replicant 100. •Tensione di uscita 200µV.•Peso di lettura consigliato 3gr.•Impedenza di carico consigliata > 100 ohm.•Corpo in legno.•Peso 30gr.

SPU Royal GM MkII The SPU Royal GM MKII provides a playback experience that embodies the essence of analog, with generous refinements which bring the legendary SPU cartridges into the realm of unrivaled perfection. The addition of Ortofon’s unique Replicant 100 stylus and reduced tip mass ensures open and detailed sound reproduction for a purely exquisite listening experience. Electrum coils, consisting of a gold and silver alloy, provides uncolored and precise transmission of armature movements while the slightly modified damping system makes it possible to reduce VTF and achieves a higher level of linearity. High purity 6-nines copper wiring ensures impeccable signal transmission and preservation of the finest of microdynamic detail. Technical data  Output voltage at 1000 Hz, 5cm/sec. 200 µV  Channel balance at 1 kHz < 1 dB  Channel separation at 1 kHz > 25 dB  Channel separation at 15 kHz > 20 dB  Frequency range at - 3dB 20-60.000 Hz  Frequency response FIM distortion at recommended 20-20.000 Hz + 1,5 / - 0 dB  Tracking ability at 315Hz at recommended tracking force *) 70 µm  Compliance, dynamic, lateral 8 µm/mN  Stylus type Nude Ortofon Replicant 100  Stylus tip radius r/R 5/100 µm  Tracking force range 2,5-3,5 g (25-35 mN)  Tracking force, recommended 3,0 g (30 mN)  Tracking angle 20°  Internal impedance, DC resistance 6 Ohm  Recommended load impedance > 100 Ohm  Cartridge body material Grinded wood  Coilwire material Goldplated Silver  Cartridge colour Shiny Black  Cartridge weight 30 g  *) Typical value


SERIE SPU Telefona o invia un  e-mail per ordine el'ultimo prezzo   0174 670100 - info@newaudio.it -  Telefona o invia un  e-mail per ordine e  l'ultimo prezzo 0174 670100  info@newaudio.it


ORTOFON SPU CLASSIC N                             Listino  ufficiale  €.   690,00

 

Stilo nude sferico. •Tensione di uscita 200µV.•Peso di lettura consigliato 4gr.•Impedenza di carico consigliata >10 ohm.•Peso 13gr.

Classic N The SPU Classic N provides the same sound reproduction properties as the SPU Classic GM series, but is sold without the integrated headshell unit. The SPU Classic N is a Moving Coil (MC) cartridge with an 18µm spherical stylus profile. Listeners who wish to mount the SPU Classic on a traditional headshell may do so, and those with vintage SPU-type headshells can use the Classic N to recreate an authentic and functional SPU cartridge.  Technical data Output voltage at 1000 Hz, 5cm/sec. 200 µV  Channel balance at 1 kHz < 1 dB  Channel separation at 1 kHz > 20 dB  Channel separation at 15 kHz > 10 dB Frequency range at - 3dB 20-25.000 Hz Frequency response FIM distortion at recommended 20-20.000 Hz ± 3 dB Tracking ability at 315Hz at recommended tracking force *) 65 µm  Compliance, dynamic, lateral 8 µm/mN  Stylus type Nude spherical  Stylus tip radius R 18 µm  Tracking force range 3,0-5,0 g (30-50 mN)  Tracking force, recommended 4,0 g (40 mN)  Tracking angle 20°  Internal impedance, DC resistance 6 Ohm  Recommended load impedance > 10 Ohm  Coilwire material High Purity Copper (OFC)  ,Cartridge colour Black  Cartridge weight 13 g  *) Typical value

ORTOFON SPU CLASSIC NE                            Listino  ufficiale  €.   790,00

 

Stilo nude ellittico. •Tensione di uscita 200µV.•Peso di lettura consigliato 4gr.•Impedenza di carico consigliata >10 ohm.•Peso 13gr.

Classic N E The SPU Classic N E provides the same sound reproduction properties as the SPU Classic GM E series, but is sold without the integrated headshell unit. The SPU Classic N is a Moving Coil (MC) cartridge with an elliptical stylus profile and provides more detailed sound reproduction and expansive imaging. Listeners who wish to mount the SPU Classic on a traditional headshell may do so, and those with vintage SPU-type headshells can use the Classic N E to recreate an authentic and functional SPU cartridge.Technical data Output voltage at 1000 Hz, 5cm/sec. 200 µV  Channel balance at 1 kHz < 1 dB  Channel separation at 1 kHz > 20 dB  Channel separation at 15 kHz > 10 dB  Frequency range at - 3dB 20-25.000 Hz  Frequency response FIM distortion at recommended 20-20.000 Hz + 3 / - 2 dB  Tracking ability at 315Hz at recommended tracking force *) 65 µm  Compliance, dynamic, lateral 8 µm/mN  Stylus type Nude elliptical  Stylus tip radius r/R 8/18 µm  Tracking force range 3,0-5,0 g (30-50 mN)  Tracking force, recommended 4,0 g (40 mN)  Tracking angle 20°  Internal impedance, DC resistance 6 Ohm  Recommended load impedance > 10 Ohm  Coilwire material High Purity Copper (OFC)  Cartridge colour Black  Cartridge weight 13 g  *) Typical value

ORTOFON SPU ROYAL N                              Listino  ufficiale  €.  1.450,00

 

Stilo nude Ortofon replicant 100. •Tensione di uscita 200µV.•Peso di lettura consigliato 3gr.•Impedenza di carico consigliata >100 ohm. •Peso 13gr.

Royal N  The SPU Royal N provides the same sound reproduction properties as the SPU Royal GM series, but is sold without the integrated headshell unit. The SPU Royal N provides a playback experience that embodies the essence of analog, with generous refinements which bring the legendary SPU cartridges into the realm of unrivaled perfection. The addition of Ortofon’s unique Replicant 100 stylus and reduced tip mass ensures open and detailed sound reproduction for a purely exquisite listening experience. Electrum coils, consisting of a gold and silver alloy, provides uncolored and precise transmission of armature movements while the slightly modified damping system makes it possible to reduce VTF and achieves a higher level of linearity. High purity 6-nines copper wiring ensures impeccable signal transmission and preservation of the finest of microdynamic detail. Listeners who wish to mount the SPU Royal N on a traditional headshell may do so, and those with vintage SPU-type headshells can use the Royal N to recreate an authentic and functional SPU cartridge. Technical data Output voltage at 1000 Hz, 5cm/sec. 200 µV  Channel balance at 1 kHz < 1 dB  Channel separation at 1 kHz > 25 dB  Channel separation at 15 kHz > 20 dB  Frequency range at - 3dB 20-60.000 Hz  Frequency response FIM distortion at recommended 20-20.000 Hz + 1,5 / - 0 dB  Tracking ability at 315Hz at recommended tracking force *) 70 µm  Compliance, dynamic, lateral 8 µm/mN  Stylus type Nude Ortofon Replicant 100  Stylus tip radius r/R 5/100 µm  Tracking force range 2,5-3,5 g (25-35 mN)  Tracking force, recommended 3,0 g (30 mN)  Tracking angle 20°  Internal impedance, DC resistance 6 Ohm  Recommended load impedance > 100 Ohm  Coilwire material Goldplated Silver  Cartridge colour Blue/Gold  Cartridge weight 13 g  *) Typical value



 

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


ORTOFON  TA-110     €.1.450,00  Per prezzo scontato TELEFONA /E-MAIL

Braccio a S da 9". •Tipo statico con articolazione su cuscinetti.•Adatto sia per testine a bassa che ad alta massa (con peso aggiuntivo opzionale).•Cavo 6NX-TSW 1010 in dotazione.•Shell portatestina LH-2000 in dotazione
 

                 

ORTOFON  AS-210      €.1.575,00  Per prezzo scontato TELEFONA /E-MAIL

Braccio a S da 9". •Tipo statico con articolazione su cuscinetti.•Cablaggio in rame 8N.•Adatto sia per testine a bassa che ad alta massa (con peso aggiuntivo opzionale).•Cavo 6NX-TSW 1010 in dotazione.•Shell portatestina opzionale

 

             

ORTOFON  AS-309S      €.1.850,00  Per prezzo scontato TELEFONA /E-MAIL

Braccio a S da 12". •Tipo statico con articolazione su cuscinetti.•Cablaggio in rame 8N.•Adatto sia per testine a bassa che ad alta massa (con peso aggiuntivo opzionale).•Cavo 6NX-TSW 1010 in dotazione.•Shell portatestina opzionale

AS-309S - 12 inch – Ortofon’s AS series static-balance tonearms feature high quality materials and construction, combined with a nod to analog’s past, for precise sound reproduction combined with a modern-vintage aesthetic. AS series tonearms can be used for a wide array of cartridges (SPUs require an additional counterweight) and feature anti-skating control.Technical data: Effective length (distance between the stylus and pivot point): 326mm Length (distance between the pivot point and turntable center): 311mm Offset angle: 19 degrees Overhang: 15mm Tracking force adjusting range ( direct reading): 0 to 3g Height adjustment range: 35mm to 55mm Diameter of the armbase mounting hole: 19mm to 20mm  Diameter of center shaft: 18mm  Optional counterweight for heavier cartridge between 26 and 38 grams is available

ORTOFON  RS-212D      €.2.500,00  Per prezzo scontato TELEFONA /E-MAIL

Braccio a S da 9" •Tipo dinamico con articolazione unipivot.•Cablaggio in rame 8N. Adatto sia per testine a bassa che ad alta massa (con peso aggiuntivo opzionale).•Cavo 6NX-TSW 1010 in dotazione.•Shell portatestina opzionale.

RS-212D - 9 inch - Ortofon’s D series tonearms take analog sound reproduction to a higher level with highly configurable VTF options, and a dynamic balance system for increased stability when tracking warps and other anomalies. D series tonearms can be used for a wide array of cartridges, feature anti-skating control.Technical data:  Effective length (distance between the stylus and pivot point): 229mm Length (distance between the pivot point and turntable center): 214mm Offset angle: 22 degrees Overhang: 15mm Tracking force adjusting range (direct reading): 0 - 5 g  Height adjustment range: 42 mm - 57 mm Diameter of the armbase mounting hole: 34 mm - 36 mm Diameter of the center shaf: 16 mm Digital scale DS 1 included Headshell SH-1 included

ORTOFON  RS-309D      €.2.620,00  Per prezzo scontato TELEFONA /E-MAIL

Braccio a S da 12". •Tipo dinamico con articolazione unipivot.•Cablaggio in rame 8N.•Adatto sia per testine a bassa che ad alta massa (con peso aggiuntivo opzionale).•Cavo 6NX-TSW 1010 in dotazione.•Shell portatestina opzionale.

RS-309D - 12 inch - Ortofon’s D series tonearms take analog sound reproduction to a higher level with highly configurable VTF options, and a dynamic balance system for increased stability when tracking warps and other anomalies. D series tonearms can be used for a wide array of cartridges, feature anti-skating control. Technical data:Effective length (distance between the stylus and pivot point): 326mm Length (distance between the pivot point and turntable center): 311mm Offset angle: 19 degrees Overhang: 15mm Tracking force adjusting range (direct reading): 0 - 5 g  Height adjustment range: 42 mm - 57 mm Diameter of the armbase mounting hole: 34 mm - 36 mm  Diameter of the center shaft: 16 mm Digital scale DS 1 included Headshell SH-1 included

ORTOFON  CW-C      €.228,00  Per prezzo scontato TELEFONA /E-MAIL

Extra weight for AS-212S & AS-309S

ORTOFON  CW-D      €.294,00  Per prezzo scontato TELEFONA /E-MAIL
Extra weight for AS-212S & AS-309S


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


 

ORTOFON  DS-1                               Listino  ufficiale  €.   150,00

 

Bilancia digitale con display LCD misura pressione stilo.

 

ORTOFON  DS-3                               Listino  ufficiale  €.   150,00

 

Bilancia digitale con display LCD misura pressione stilo.

ORTOFON  LIBELLE                              Listino  ufficiale  €.     8,00

 

Livella in plastica per la messa in piano del giradischi

ORTOFON  BUBLE LEVEL                           Listino  ufficiale  €.     37,00

 

 

Livella in alluminio/vetro per la messa in piano del giradischi.


DS-1 DIGITAL SCALE Bilancia digitale con display LCD misura pressione stilo. 145,00 euro
STYLUS PRS. GAUGE Bilancina manuale misura pressione stilo.                             9,00 euro
ALIGNMENT TOOL Dima per l'allineamento della testina.                                         6,00 euro
APJ 1 Adattatore SPU A.                                                                                             99,00 euro
SPU N ADAPT. Adattatore SPU N.                                                                              29,00 euro
T4P ADAPTOR Adattatore per attacco T4P                                                                 6,00 euro
STYLUS BRUSH Spazzolino pulisci stilo.                                                                     3,00 euro
STYLUS BRUSH CF Spazzolino pulisci stilo in fibra di carbonio.                             12,00 euro
LEAD WIRES Set cavetti per collegamento testina/braccio.                                    3,00 euro
SCREWS Set viti per montaggio testina.                                                                    4,00 euro
OM TOOL Utensile per montaggio testine.                                                                  4,00 euro
BUBBLE LEVEL Livella in alluminio/vetro per la messa in piano del giradischi.    36,00 euro
LIBELLE Livella in plastica per la messa in piano del giradischi.                               7,00 euro
SB-1, STROBE Stroboscopio.                                                                                    179,00 euro
LUG-B4 Set di 4 terminazioni a forcella placcate in rodio.                                      90,00 euro


PRE PHONOTelefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it

 


ORTOFON  VERTO                           Listino  ufficiale  €.     995,00

 

 

Verto Ortofon is pleased to introduce the Verto – a moving coil transformer reserved for only the most discerning audiophiles and music lovers. The Verto, not unlike its predecessors, takes an unrelenting approach to audio reproduction by combining the finest components available along with world class engineering, for unparalleled sound reproduction.  Starting with exceptional quality Lundahl ™ transformers, surrounded by a specialized mu-metal shielding, listeners can be assured that each detail in a complex array of notes is reproduced with utter purity, with freedom from internal and external sources of interference. These two items combined make Verto one of the quietest, most revealing transformers ever offered to the audiophile market. Featuring dual mono design, the Verto provides discrete circuitry for each channel, resulting in the elimination of crosstalk and possible distortions. This results in cleaner, clearer reproduction with substantially increased stereo imaging. Regardless of the composition being played, the Verto’s expansive stereo separation provides lifelike realism, and accurate tonal balance devoid of coloration. To further minimize signal degradation and maximize signal flow, the Verto has been engineered using high quality industrial grade PCB. Additionally, gold plated RCA jacks with Teflon insulation provide optimal conductivity for use with high quality interconnects. Internally, the unit is assembled with an absolute bare minimum of internal wiring, preserving absolute signal integrity.  The Ortofon Verto maintains compatibility with most Moving Coil cartridges, with internal jumbers offering two gain/impedance options. This affords audiophiles with broad flexibility while still maintaining a clean aesthetic. TECHNICAL DATA  Configuration A: Recomended cartridge impedance 5-50 Ohm Gain 1kHz 24 dB Freq response 10 Hz - 100 kHz ± 1 dB Configuration B: Recomended cartridge impedance < 10 Ohm Gain 1kHz 30 dB Freq response 10 Hz - 80 kHz ± 1 dB Trafo output loading 47 kOhm / 200 pF Dimensions 75 X 125 X 170 mm Recomended load; 47 Kohm, 200 p

ORTOFON  ST-7                           Listino  ufficiale  €.    599,00

 



Trasformatore di Step Up per testine a bobina mobile (MC). Particolarmente indicato per le testine Ortofon della serie Quintet e SPU. Costruzione dual-mono. Chassis con struttura a sandwich e trasformatori schermati in un contenitore in permalloy. Connettori RCA dorati con isolamento in Teflon. Piedini anti-vibrazione in alluminio/gomma.

 

ORTOFON  ST-80SE                            Listino  ufficiale  €.    1.680,00

 

Trasformatore di Step Up per testine a bobina mobile (MC).  Costruzione Dual-Mono. Doppi trasformatori per canali sinistro e destro, magneticamente schermati in un contenitore in permalloy inserito in un cilindro di alluminio dello spessore di 10mm ricavato dal pieno, ed isolati fisicamente dal contenitore principale per evitare dei disturbi esterni. Connettori RCA dorati con isolamento in Teflon. Partner ideale per testine MC quali: la serie Cadenza, MCA90, MC Windfeld, tutta la serie SPU e Xpression.
 

 

 


SHELLTelefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


ORTOFON  LH2000    €.65,00  Per prezzo scontato TELEFONA /E-MAIL

LH-2000 The LH-2000 is a basic high quality headshell designed specifically for HiFi use. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges.

ORTOFON  LH6000     €.99,00  Per prezzo scontato TELEFONA /E-MAIL

LH-6000 The LH-6000 is a high quality headshell designed specifically for the Kontrapunkt, Jubilee, and Windfeld cartridges. Its rounded front portion facilitates proper mounting and compliments each of these cartridges.

ORTOFON  LH8000  €.129,00  Per prezzo scontato TELEFONA /E-MAIL

The LH-8000 is a high quality handmade wood-based headshell with a polished brass finger lift. The highly attractive LH-8000 is perfect for a variety of cartridges.


ORTOFON  LH9000  €.179,00  Per prezzo scontato TELEFONA /E-MAIL

LH-9000  The LH-9000 is a new exceptionally high quality headshell made by carbon fiber. The new LH-9000 is perfect for a variety of high-end cartridges.




Telefona o invia un  e-mail per ordine el'ultimo prezzo   0174 670100 - info@newaudio.it -  Telefona o invia un  e-mail per ordine e  l'ultimo prezzo 0174 670100  info@newaudio.it


ORTOFON  LW6N     €.39,00  Per prezzo scontato TELEFONA /E-MAIL

Set di 4 cavetti per il collegamento di braccio/testina. •Conduttori in rame 6N OFC.•Terminali dorati.

LW-6N is the 6N lead wire made of Ultra high purity copper wire, the configuration is very sofisticated with different diameter of wire strand, the inside strand is right windings, the outside strand is left winding. The tight winding against each other makes the clear transmission of music signals. Clear and crisp tonality. The end of wire is fastened by gold plated terminal. •High purity Cu wire 6NCu: 7 x φ 0.18mm (Right strands) •High purity Cu wire 6NCu: 17 x φ 0.10mm (Left strands)

ORTOFON  LW7N     €.49,00  Per prezzo scontato TELEFONA /E-MAIL

Set di 4 cavetti per il collegamento di braccio/testina. •Conduttori in rame 7N/6N OFC.•Terminali in rodio.

LW-7N is the hybrid lead wire made of Ultra high purity copper wire of 7N and 6 N. As there is no foreign particle other than copper 7N (99.99999 % purity) in the wire, music signal can be transmitted without any noise. The end of wire is fastened by rohdium plated terminal.•High purity Cu wire 7NCu: 3 x φ 0.26mm •High purity Cu wire 6NCu: 16 x φ0.10mm

ORTOFON  LW800S     €.99,00  Per prezzo scontato TELEFONA /E-MAIL

Set di 4 cavetti per il collegamento di braccio/testina. Conduttori in argento 4N OFC. Terminali in rodio.

LW-800S is the most sophisticated lead wires composed of pure silver and silver coated wire. The nature of silver wire, silver coated wire transmits the very clear high tone signals, it brings the brilliant tonality. The end of wire is fastened by rohdium plated terminal.
•4N Pure Silver wire: 3 x φ 0.26mm •Silver plated OFC wire: 16 x φ0.10mm

ORTOFON  6NX-TSW-1010    €.225,00  Per prezzo scontato TELEFONA /E-MAIL

6NX-TSW-1010 This cable is made of high purity copper 6N/5N Hybrid. This is an exclusive use for tonearm connection. RCA center pin is rhodium plated. Technical specifications: Conductor material: Hi-purity OFC Length: 1 x 1.2m Diameter: Ř 10 mm ,RCA Terminal Gold plated

ORTOFON  6NX-TSW-1010R    €.225,00  Per prezzo scontato TELEFONA /E-MAIL

ORTOFON  6NX-TSW-1010L    €.250,00  Per prezzo scontato TELEFONA /E-MAIL




Telefona o invia un  e-mail per ordine el'ultimo prezzo   0174 670100 - info@newaudio.it -  Telefona o invia un  e-mail per ordine e  l'ultimo prezzo 0174 670100  info@newaudio.it


ORTOFON 3e                          €.35,00  Per offerta TELEFONA /E-MAIL
Technical data Frequency range 20-20.000 Hz Frequency response 20-18.000 Hz + 2 / - 3 dB Tracking ability at 315Hz at recommended tracking force *) 60 µm Compliance, dynamic, lateral 20 µm/mN Stylus type Elliptical Stylus tip radius r/R 8/18 µm Equivalent stylus tip mass 0,5 mg Tracking force range 1,5-2,0 g (15-20 mN)  Tracking force, recommended 1,75 g (17,5 mN)  Tracking angle 20° Stylus colour Black  Recommended for following cartridges OM 3E, OMP 3E  *) Typical value

 

ORTOFON 5e                      €.39,00  Per offerta TELEFONA /E-MAIL

Stylus 5E Technical data  Frequency range 20-25.000 Hz Frequency response 20-25.000 Hz Tracking ability at 315Hz at recommended tracking force *) <1% Compliance, dynamic, lateral 65 µm Stylus type Elliptical  Stylus tip radius r/R 8/18 µm  Equivalent stylus tip mass 0,5 mg  Tracking force range 1,5-2,0 g (15-20 mN)  Tracking force, recommended 1,75 g (17,5 mN)  Tracking angle 20°Stylus colour Black  Recommended for following cartridges OM 5E, OMP 5E, OMB 5E, OMT 5E  *) Typical value
 

ORTOFON 10                      €.41,00  Per offerta TELEFONA /E-MAIL

Stylus 10 Technical data 10 STYLUS Frequency range 20-24.000 Hz Frequency response 20-20.000 Hz + 3 / - 1 dB Tracking ability at 315Hz at recommended tracking force *) 70 µm Compliance, dynamic, lateral 25 µm/mN Stylus type Elliptical Stylus tip radius r/R 8/18 µm Equivalent stylus tip mass 0,5 mg Tracking force range 1,25-1,75 g (12,5-17,5 mN)  Tracking force, recommended 1,5 g (15 mN)  Tracking angle 20°  Stylus colour Black  Recommended for following cartridges Super OM 10, OM 10, OMP 10, OMB 10, OMT 10, LM 10, Concorde 10, Concorde EC 10, TM 10H, LMB 12, SMB 12, LMA 12  *) Typical value
 

ORTOFON 78                      €.48,00  Per offerta TELEFONA /E-MAIL

Stylus 78Technical data  Frequency range 20-15.000 Hz Frequency response 20-12.000 Hz + 2 / - 3 dB Tracking ability at 315Hz at recommended tracking force *) 60 µm Compliance, dynamic, lateral 15 µm/mN  Stylus type spherical Stylus tip radius 65µm Equivalent stylus tip mass 0,5 mg Tracking force range 1,75-2,25 g (17,5-22,5 mN) Tracking force, recommended 2,0 g (20 mN) Tracking angle 20°  Stylus colour Black Recommended for following cartridges All Super OM, OM, OMP, TM, Concorde cartridges for playing 78 r.p.m. records  *) Typical value

ORTOFON  d25m                €.50,00  Per offerta TELEFONA /E-MAIL

Stylus D 25 M Technical data D 25M STYLUS  Frequency range 20-20.000 Hz Frequency response 20-18.000 Hz + 2 / - 3 dB Tracking ability at 315Hz at recommended tracking force *) 70 µm  Compliance, dynamic, lateral 7 µm/mN Stylus type Spherical Stylus tip radius R 25µm Equivalent stylus tip mass 0,5 mg  Tracking force range 2,0-3,0 g (20-30 mN) Tracking force, recommended 2,5 g (25 mN)  Tracking angle 20°  Stylus colour Black  Recommended for following cartridges All Super OM, OM OMP, TM, Concorde cartridges for playing micro-groove records  *) Typical value

ORTOFON 2M red                 €.71,00  Per offerta TELEFONA /E-MAIL

Stylus 2M Red Technical data  Frequency range 20-22.000 Hz Frequency response 20-20.000 Hz + 3 / - 1 dB Tracking ability at 315Hz at recommended tracking force *) 70 µm  Compliance, dynamic, lateral 20 µm/mN  Stylus type Elliptical  Stylus tip radius r/R 8/18 µm  Equivalent stylus tip mass 0,5 mg  Tracking force range 1,6-2,0 g (16-20 mN)  Tracking force, recommended 1,8 g (18 mN)  Tracking angle 20°  Stylus colour Red  Recommended for following cartridges 2M Red

ORTOFON 2M blue             €.138,00  Per offerta TELEFONA /E-MAIL

Stylus 2M Blue  Technical data  Frequency range 20-25.000 Hz Frequency response 20-20.000 Hz + 2 / - 1 dB Tracking ability at 315Hz at recommended tracking force *) 80 µm Compliance, dynamic, lateral 20 µm/mN Stylus type Nude Elliptical Stylus tip radius r/R 8/18 µm  Equivalent stylus tip mass 0,5 mg  Tracking force range 1,6-2,0 g (16-20 mN)  Tracking force, recommended 1,8 g (18 mN)  Tracking angle 20°  Stylus colour Blue  Recommended for following cartridges 2M Blue *) Typical value

ORTOFON 2M bronze       €.247,00  Per offerta TELEFONA /E-MAIL

Stylus 2M Bronze Technical data  Frequency range 20-29.000 Hz  Frequency response 20-20.000 Hz + 2 / -0 dB  Tracking ability at 315Hz at recommended tracking force *) 80 µm  Compliance, dynamic, lateral 22 µm/mN  Stylus type Nude Fine Line Stylus tip radius r/R 8/40 µm Tracking force range 1,4-1,7 g (14-17 mN)  Tracking force, recommended 1,5 g (15,0 mN)  Tracking angle 20°  Stylus colour Bronze  Recommended for following cartridges 2M Bronze *) Typical value


ORTOFON
2M black
        €.428,00  Per offerta TELEFONA /E-MAIL

Stylus 2M Black Technical data Frequency range 20-31.000 Hz Frequency response 20-20.000 Hz + 2 / - 0 dB Tracking ability at 315Hz at recommended tracking force *) 80 µm  Compliance, dynamic, lateral 22 µm/mN  Stylus type Nude Shibata Stylus tip radius r/R 6/50 µm  Tracking force range 1,4-1,7 g (14-17 mN)  Tracking force, recommended 1,5 g (15 mN)  Tracking angle 20°  Stylus colour Black  Recommended for following cartridges 2M Black*) Typical value

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it



 Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Nota  bene *

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a   info@newaudio.it

*I prezzi indicati  sono  di  listino  ufficiale  delle case produttrici ,nel  caso  di  diffusori  si  riferisce al prezzo  del  singolo  diffusore  per  offerte  ed  eventuali  promozioni  telefonare o  inviare e-mail.

*Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati  possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati.

*Tutti i marchi citati nel presente listino sono di proprietŕ e registrati alle rispettive Case Produttrici

*Prezzi franco nostro magazzino


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it