HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 


INTERFACCE

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   info@newaudio.it   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@newaudio.it


M2TECH HIFACE          €.  159,00      Per offerta e promozioni Telefona/E-mail

interfaccia a penna USB per PC o MAC per ascolto di  musica liquida - connettori RCA

hiFace Hi-End S/PDIF Output Interface DETAILS Highest quality digital audio up to 192kHz/24bit S/PDIF audio format available from your PC or MAC Very low jitter oscillators and proprietary drivers Compact size (2x2.2x10.2cm) with hi-end performances hiFace USB interface has been conceived to obtain the highest quality digital audio signal using a PC or MAC. hiFace input format is a data stream signal with sampling frequency/resolution up to 192kHz/24bits, available from a PC or MAC USB port. A very high quality S/PDIF stereo audio output signal is available from hiFace for your Hi-Fi system DAC (Digital to Analog Converter). HiFace looks like a small USB pendrive, featuring a very compact size. Internal very low jitter oscillators and proprietary drivers allow for playing 192kHz/24bits audio files that feature the best signal quality.  FEATURES 1) LOW JITTER, LOW PHASE NOISE, HIGH STABILITY OSCILLATORS Most audio interfaces and USB-provided DACs refer the data stream clock to the same USB interface clock, that often suffers a very heavy jitter (short range oscillator frequency variations). Thanks to two quartz precision oscillators used on M2Tech hiFace, clock source for output data stream features a very low jitter. A more stable clock is recovered by DAC S/PDIF receiver; a low jitter produces a very limited sound image distortion and degradation. Phase noise (main responsible for jitter) is also very low: this guarantees a short and long range clock stability, also reinforced by a board supply voltage regulation (e.g. at environmental temperature stability is 2-5ppm approximately, compared to 50-100ppm performed by oscillators normally used on commercial CD players).  2) PROPRIETARY DRIVERS The standard audio drivers available on the market (e.g. Microsoft Windows operating system) dictated constraints can be overcome thanks to hiFace proprietary drivers: they allow for transferring audio data, maintaining the original file quality without any loss of resolution quality; also, sampling frequency constraints are overcome, while Microsoft and ASIO drivers oblige to operate at no more than 96kHz. When hiFace is used together with a player application such as FooBar (available for free on Internet), you can transfer S/PDIF stream music files to a D/A converter at 192kHz/24bits maximum frequency/resolution, avoiding undesired PC or MAC audio mixer data processing during the data transfer from hard disk to interface. Presently, Windows XP, Vista, Windows 7 drivers are available, as well as Mac drivers for 10.4, 10.5 and 10.6.  3) COMPACT SIZE AND EASE OF USE M2Tech hiFace features a very compact size and can be directly (or using an accessory USB A-A adapter, not supplied with hiFace) connected to a High Speed USB 2.0 port of any computer. A very high electric and mechanical performance RCA gold connector provides an output signal, ready to be connected to a Hi-End system. No external power supply is required, as hiFace draws its power from USB bus itself and regulates it with its internal regulators. hiFace USB interface connected to a last generation mini PC provided with a High Speed USB port makes for a complete music transport system at very low prices (in the range of few hundreds Euros). Such system allows for listening any density and resolution music files, playing own CD's using a CD ROM drive, obtaining access to more than 10,000 web radio, many of which broadcast their transmissions with CD quality.  SPECIFICATIONS Connections Input 1 x USB A type male Output 1 x RCA female I/O Standard Input USB 2.0 Format Output S/PDIF Stereo Digital Audio Format Sampling Frequency 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4khZ, 192kHz Resolution 16 up to 24 bit Dimensions 10.2(d) x 2.2(h) x 2(w) cm Power Supply 5V DC from USB bus Temperature from 0°C to 70°C Weight 50gr approx.

M2TECH HIFACE TWO    €. 179,00      Per offerta e promozioni Telefona/E-mail

interfaccia a penna USB per ascolto di musica liquida - conforme allo standard USB 2.0 Audio (non serve il driver per Mac e Linux) e fornito di driver per Windows - compatibile Linux - compatibile ASIO in Windows

DETAILS Highest quality digital audio up to 192kHz/24bit S/PDIF audio format available from your PC, MAC or Linux computer. Very low jitter oscillators, asynchronous transfer on USB. Compact size (2x2.2x10.2cm) with hi-end performances hiFace Two USB interface has been conceived to further improve the performance and ease of use of the acclaimed and award-winning hiFace. hiFace Two input format is a data stream signal with sampling frequency/resolution up to 192kHz/24bits, compliant to USB Audio 2.0 specificastions, available from a PC, MAC or Linux computer USB port. A very high quality S/PDIF stereo audio output signal is available from hiFace for your Hi-Fi system DAC (Digital to Analog Converter). HiFace looks like a small USB pendrive, featuring a very compact size. Internal very low jitter oscillators allow for playing 192kHz/24bits audio files that feature the best signal quality. hiFace Two is even easier to use than the hiFace. No drivers are necessary with either Mac and Linux computers, while a single standard driver is required for Windows computers. While the old hiFace offered Direct Sound, Kernel Streaming and WASAPI transfer modes, hiFace Two adds ASIO mode to enable interfacing to pro players and software tools. hiFace improves the audio performance over the hiFace by a new output circuit compliant with S/PDIF levels, linear regulators in place of switching ones and a clickless operation even when skipping tracks.FEATURES 1) LOW JITTER, LOW PHASE NOISE, HIGH STABILITY OSCILLATORS Most audio interfaces and USB-provided DACs refer the data stream clock to the same USB interface clock, that often suffers a very heavy jitter (short range oscillator frequency variations). Thanks to two quartz precision oscillators used on M2Tech hiFace, clock source for output data stream features a very low jitter. A more stable clock is recovered by DAC S/PDIF receiver; a low jitter produces a very limited sound image distortion and degradation. Phase noise (main responsible for jitter) is also very low: this guarantees a short and long range clock stability, also reinforced by a board supply voltage regulation (e.g. at environmental temperature stability is 2-5ppm approximately, compared to 50-100ppm performed by oscillators normally used on commercial CD players). 2) USB 2.0 AUDIO COMPLIANCE No more needs for custom driver. Using the hiFace Two is very easy. Just connect it to your Mac or Linux computer and it will be immediately visible in the devices list and ready to use. A driver is still necessary for Windows computers, which enables for DS, KS, WASAPI and ASIO mode. 3) COMPACT SIZE AND EASE OF USE M2Tech hiFace features a very compact size and can be directly (or using an accessory USB A-A adapter, not supplied with hiFace) connected to a High Speed USB 2.0 port of any computer. A very high electric and mechanical performance RCA gold connector provides an output signal, ready to be connected to a Hi-End system. No external power supply is required, as hiFace draws its power from USB bus itself and regulates it with its internal regulators. hiFace USB interface connected to a last generation mini PC provided with a High Speed USB port makes for a complete music transport system at very low prices (in the range of few hundreds Euros). Such system allows for listening any density and resolution music files, playing own CD's using a CD ROM drive, obtaining access to more than 10,000 web radio, many of which broadcast their transmissions with CD quality. SPECIFICATIONS Connections Input 1 x USB A type male Output 1 x RCA or BNC female I/O Standard Input USB 2.0 Audio Format Output S/PDIF Stereo Digital Audio Format Sampling Frequency 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4khZ, 192kHz Resolution 16 up to 24 bit Dimensions 10.2(d) x 2.2(h) x 2(w) cm Power Supply 5V DC from USB bus Temperature from 0°C to 70°C Weight 50gr approx.


UNITA CLOCK

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   info@newaudio.it   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@newaudio.it


M2TECH HIFACE Evo II       €. 599,00       Per offerta e promozioni Telefona/E-mail

interfaccia per PC o MAC per ascolto di musica liquida (senza alimentatore  COSTO + 20,00 euro)

hiFace Evo Hi-End S/PDIF Output Interface DETAILS hiFace Evo by M2Tech is the new statement in high quality computer audio interfaces. Hosted in a compact and stylish aluminium case, hiFace Evo is capable of flawlessly transfer audio data up to 192kHz, 24 bits to virtually every DAC or A/V receiver around, thanks to its comprehensive outputs set. hiFace Evo incorporates the same leading edge technology as the classic hiFace – with some plus. Asynchronous operation up to 192kHz is used in conjunction with proprietary drivers which allow for Kernel Streaming, Direct Sound and WASAPI operation (the latter under Windows vista and 7). Windows and Mac drivers are already available. Very high precision, very low phase noise (jitter) crystal oscillators are used. To further improve their performance, they have a dedicated shunt voltage regulator which ensures a very low noise and spurious-free supply. hiFace Evo is powered by an external power supply (not included), to avoid the dirty USB bus supply from negatively affecting hiFace Evo’s performance. Linear regulators are used all around, to allow all jitter-sensitive digital circuits to operate at their best. Also, a low-pass filter is provided at supply input to further reduce any bad influence from the supply. hiFace Evo can be powered by an external wall adapter (9V 1A will fit), or with a 9V alkaline battery, or with a 7.2V/10.8V Lythium battery. Several outputs are available at the same time: coax on RCA, coax on true 75 Ohms BNC, AES/EBU on male XLR, optical on Toslink™ (Toslink™ is guaranteed to operate up to 96kHz, though we got operation up to 176.4kHz on certain setups), optical on ST (for high-speed operation up to 192kHz and up to 1.6km or 1 mile), straight I2S for direct connection to DIY DACs on RJ-45 (NOT plug-in compatible with NorthStar products!). All outputs, except straight I2S, are galvanically isolated (coax and AES/EBU via a pulse transformer). AES/EBU output can be set to professional or consumer mode by an internal jumper. In addition, an input for an external clock is available, for those who have a extremely precise and stable clock generator to be used with hiFace Evo. hiFace evo automatically recognizes the presence of the clock on its input and switches on it whenever available. This input is also galvanically isolated via a pulse transformer. Three LEDs indicate power, external clock presence and incoming data from the PC. Connection to the PC is via a type B female USB connector.  FEATURES 1) LOW JITTER, LOW PHASE NOISE, HIGH STABILITY OSCILLATORS Most audio interfaces and USB-provided DACs refer the data stream clock to the same USB interface clock, that often suffers a very heavy jitter (short range oscillator frequency variations). Thanks to two quartz precision oscillators used on M2Tech hiFace, clock source for output data stream features a very low jitter. A more stable clock is recovered by DAC S/PDIF receiver; a low jitter produces a very limited sound image distortion and degradation. Phase noise (main responsible for jitter) is also very low: this guarantees a short and long range clock stability, also reinforced by a board supply voltage regulation (e.g. at environmental temperature stability is 2-5ppm approximately, compared to 50-100ppm performed by oscillators normally used on commercial CD players).  2) PROPRIETARY DRIVERS The standard audio drivers available on the market (e.g. Microsoft Windows operating system) dictated constraints can be overcome thanks to hiFace proprietary drivers: they allow for transferring audio data, maintaining the original file quality without any loss of resolution quality; also, sampling frequency constraints are overcome, while Microsoft and ASIO drivers oblige to operate at no more than 96kHz. When hiFace is used together with a player application such as FooBar (available for free on Internet), you can transfer S/PDIF stream music files to a D/A converter at 192kHz/24bits maximum frequency/resolution, avoiding undesired PC or MAC audio mixer data processing during the data transfer from hard disk to interface. Presently, Windows XP, Vista, Windows 7 drivers are available, as well as Mac drivers for 10.4, 10.5 and 10.6.  3) COMPACT SIZE AND EASE OF USE M2Tech hiFace features a very compact size and can be directly (or using an accessory USB A-A adapter, not supplied with hiFace) connected to a High Speed USB 2.0 port of any computer. A very high electric and mechanical performance RCA gold connector provides an output signal, ready to be connected to a Hi-End system. No external power supply is required, as hiFace draws its power from USB bus itself and regulates it with its internal regulators. hiFace USB interface connected to a last generation mini PC provided with a High Speed USB port makes for a complete music transport system at very low prices (in the range of few hundreds Euros). Such system allows for listening any density and resolution music files, playing own CD's using a CD ROM drive, obtaining access to more than 10,000 web radio, many of which broadcast their transmissions with CD quality.  SPECIFICATIONS Size: 105x46x104mm (w x h x d, case) 105x50x142mm (w x h x d, total) Weight: 380g Sampling frequencies (kHz): 44.1, 48, 88.2, 96, 176.4, 192 Resolution (bits): 16 to 32 Inputs: USB 2.0, supply, master clock Outputs: S/PDIF x2 (RCA & BNC) AES/EBU (XLR) optical Toslink™ optical ST I2S (RJ-45). Supply voltage: 7-11VDC (15VDC max.) Supply current: 140mA (idle, no output connected) Master clock input voltage: 3.3VPP I2S output voltage: LVCMOS (3.3V) with 25mA current capability on each line

M2TECH HIFACE CLOCK II       €. 599,00          Per offerta e promozioni Telefona/E-mail


generatore di clock di precisione per hiFace Evo e altri apparecchi; genera il clock riservato all'hiFace Evo e un clock di uso generico per altri apparecchi, con frequenza selezionabile in valori diversi; utilizza oscillatori compensati in temperatura custom; alimentabile con l'adattatore da 9V in dotazione oppure con Evo Supply

Evo Clock Precision clock generator DETAILS Word clock and master clock generation; lowest phase-noise, high precision, custom made temperature-compensated oscillators; dedicated matched line master clock output for hiFace Evo; matched line option for word clock output; word clock frequency up to 384kHz, plus 5.6448/6.144MHz and 11.2896/12.288MHz “super clock”; ultra-low noise regulators.  FEATURES Evo Clock is a cost-effective, high-performance clock generator based on extremely low phase noise, high precision TCXO’s, custom made for M2Tech. Two outputs are available: one master clock dedicated to hiFace Evo, capable of 22.5792MHz or 24.576MHz (depending on settings) and delivering 3.3Vpp on 75 Ohms matched line, and a general purpose word clock output with selectable output frequency up to 384kHz, with the option for “super clocks” 128x and 256x. The latter has a line matching option and can deliver 3.3Vpp on both high impedance and 75 Ohms loads. Ultra-low noise regulators allow for a very clean supply for both oscillators and the conditioning logic, leading to fully exploiting the oscillators performance.  SPECIFICATIONS Size: 105(w) x 46(h) x104(d) mm Weight: 350g (approx.) Word Clock Frequencies (kHz): 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 Super Clock Frequencies (MHz): 5.6448, 6.144, 11.2896, 12.288 Master Clock Frequencies (MHz): 22.5792, 24.576 Outputs: 3.3Vpp on 75 Ohms BNC matched line (master clock), 3.3Vpp on 75 Ohms BNC matched line or hi-Z line (word clock) Phase noise (@10Hz): -100dBC/Hz min. Phase noise (@100Hz): -130dBC/Hz min. Phase noise (@1kHz): -145dBC/Hz min. Precision: +/- 1.5ppm 0°C to 50°C Temperature stability: +/- 1ppm Vcc stability: +/-0.3ppm Supply voltage: 9V Supply current: 150mA


DAC

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   info@newaudio.it   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@newaudio.it


M2TECH HIFACE DAC     €. 179,00    Per offerta e promozioni Telefona/E-mail

DAC 384/32 a pennetta ad elevate prestazioni, suono cristallino anche con files 44.1/16, interfaccia USB 2.0 Audio Class compatibile; l'uscita analogica basata su un connettore 3.5mm stereo jack offre 2Vrms che possono essere accoppiati agli ingressi linea di preamplificatori e amplificatori integrati ma può pilotare anche un'ampia gamma di cuffie



M2TECH  Evo DAC TWO                     €.     549,00           Per offerta e promozioni Telefona/E-mail

convertitore D/A, conversione DXD e DSD, risoluzione 32 bit sulla porta USB 2.0, ingressi coassiale ed ottico S/PDIF, uscite single-ended su RCA femmina, controllo remoto IR con HID, può essere alimentato dal bus USB o da qualunque alimentatore 7.5V - 15V, si raccomanda Evo Supply Two

M2TECH  Evo DAC TWO +                   €.     749,00           Per offerta e promozioni Telefona/E-mail
convertitore D/A, conversione DXD e DSD, risoluzione 32 bit sulla porta USB 2.0, ingressi coassiale ed ottico S/PDIF, uscite single-ended su RCA femmina, ingresso clock suBNC femmina, info su uscita clock su Toslink™,controllo remoto IR con HID, può essere alimentato dal bus USB,dall'adattatore a muro da 9V o da qualunque alimentatore 7.5V - 15V, si raccomanda Evo Supply Two

M2TECH Evo PHONODAC TWO €. 1.340,00            Per offerta e promozioni Telefona/E-mail
Phono DAC utilizzabile come: Preamplificatore Phono - Front-end analogico per rippare su computer - Convertitore Digitale Analogico - Front-end Analogico per DSP

DETAILS  DXD A/D conversion, DXD and DSD D/A conversion, 32 bits resolution, coaxial S/PDIF inputs,single-ended analog inputs and outputs on gold-plated RCA females, IR remote control with HIDcapability, external clock input with clock info output, phono EQ in digital domain, input gain 0dBto 62dB, input impedance continuously settable 10 Ohms to 50k Ohms, same form factor of all EvoTwo products, can be powered by any 7.5V to 15V power supply, Evo Clock Two and Evo Supply Two recommended. FEATURES  The Evo PhonoDAC Two is a very high value-for-money digital/analog combo capable of converting analog to digital up to DXD and DXD and DSD to analog.Its bi-directional USB 2.0 Audio Class compliant port is natively supported (no driver needed) byOSX and Linux. An ASIO-compliant driver for Windows is provided.High precision, low-jitter clocks allow for exceptional detail resolution, maximizing the 32-bitcapability of the ESS Sabre ES9018K2M (D/A) and ES9102S (A/D)conversion IC’s.The Evo PhonoDAC Two versatile analog input stage allows for setting it’s gain from 0dB to62dB, allowing for any low-output cartridge to be directly coupled to it, as well as line-level sourceslike CD players, tuners, tape decks, etc.Input impedance may be set to any value between 10 Ohms and 50,000 Ohms, accommodating allkind of cources.The Evo PhonoDAC Two is capable of performing real-time, digital domain phono equalization,using any of the 26 EQ curves provided with it. Ancillary filters like anti-rumble, anti-hiss and MPX allow for best playback and ripping fromwarped, scratched or worned records, as well as from cassette tapes or FM and AM broadcast. The Evo PhonoDAC Two de-jitter feature allows for exceptionally good performance from coaxial and connection.The Evo PhonoDAC Two uses high quality polypropylene capacitors and a low-noise opamp inthe analog sections (input and output) for best sonic results.The IR remote control allows for accessing all Evo PhonoDAC Two features (volume, balance, muting, input selection and many other menu settings), as well as taking advantage of the HID protocol to control the player on the computer without manually accessing the keyboard. The Evo PhonoDAC Two can be powered by the stock wall adaptor in budget conscious setups, while better performance can be obtained with a good power supply such as the Evo Supply Two SPECIFICATION SPCM sampling frequency: 44.1 to 384kHz on USB (A/D and D/A)  44.1kHz to 192kHz on coax PCM resolution: 16 to 32 bits on USB (A/D and D/A) 16 to 24 bits on coaxial DSD sampling frequency: 2.8224 to 11.2896MHz (USB only) Inputs: USB on USB type B female, coaxial on RCA female,  analog on stereo RCA female  Outputs: USB on USB type B female, analog on stereo RCA female  Analog input sensitivity: 2.5Vrms (gain 0dB), 2mVrms (gain 62dB) Output voltage: 2.5Vrms (@ 0dBFS)  THD+N: 0,0008% (1kHz, 0dBFS)  SNR: 118dB (Analog to analog, 20Hz-20kz, 1kHz, A-weighted)  120dB (USB to analog, 20Hz-20kz, 1kHz, A-weighted)  Clock precision: 10ppm (0-60°C)  Supply voltage: 7.5V to 15V, 400mA  Supply input: 5.5/2.1mm jack, positive on tip  Size: 105(w)x46(h)x104(d)mm  Weight: 250g

M2TECH YOUNG DAC dsd    €.  1.340,0   Per offerta e promozioni Telefona/E-mail

convertitore D/A con ingresso USB asincrono in Classe 2, ingressi S/PDIF, AES/EBU ed ottico, uscite bilanciate e single-ended (con adattatori), telecomando, filtro passivo anti-alias, circuito di cancellazione current mode offset, controllo volume analogico controllato digitalmente, massimo voltaggio di uscita selezionabile 2.5Vrms (SE) - 10Vrms (bilanciato), abilitato HID

Young 384/32 D/A converter DETAILS High-speed asynchronous USB connection Oversampling filters with minimum pre-echo and phase linearity S/PDIF, AES/EBU, Toslink digital inputs Line level single-ended on RCA output connectors Encased in a stylish aluminium case.  FEATURES Young is a high performance, very high value-for-money D/A converter capable of handling up to 384kHz sampling rate and 32 bits resolution (USB input). It features a high speed asynchronous USB input based on the hiFace technology, further developped to allow for higher sampling rates. A comprehensive input set (S/PDIF on RCA and BNC, AES/EBU on XLR and optical on Toslink) provide great connection versatility. Despite its price, Young encopasses a leading edge technology for data handling and processing. A high performance oversampling filter, custom-made on a programmable logic device (FPGA) implements minimum-phase filters optimized for sound quality which allow for a very low noise floor. A 32 bits -D/A integrated circuit is used in a non-conventional mode to allow for 768kHz internal operation. The synergy between the DAC IC and the custoim oversampler allows for exceptionally low noise floor and THD. The output buffer uses a special operational amplifier with very low noise and THD thanks to its class-A biased output stage. The small size and stylish look of the Young allow for a uninvasive placement in every living space. SPECIFICATIONS Size: 200(w) x 50(h) x 200(d) mm Weight: 1Kg approx. Sampling Frequencies(kHz): 44.1, 48, 88.2, 96, 176.4*, 192*, 352.8**, 384** Resolution: 16 up to 24 bit (S/PDIF, AES/EBU, optical), 16 to 32 bit (USB) Frequency response: 10-20kHz +0.1/-0.5dB (fs = 44.1kHz) 10-90kHz +0.1/-0.1dB (fs=384kHz) SNR: 121dB (A weighted, 192kHz, 24 bits, 20kHz bandwidth) THD+N: 0.0003% (192kHz, 24 bits) Inputs: 2 x S/PDIF (RCA and 75 Ohms BNC) 1x AES/EBU (XLR) 1x optical (Toslink) 1x USB (USB female Type B) Output: single ended on RCA female Output voltage: 2,65Vrms (7.5Vpp @ 0dBFS) Supply voltage: 15V-18VDC Supply current: 240mA@15V

M2TECH JOPLIN 384 / 24 ADC  €. 1.990,00   Per offerta e promozioni Telefona/E-mail

Convertitore A/D operante fino a 384kHz e 32 bit con interfaccia USB 2.0 Audio class compatibile. Guadagno dello stadio analogico variabile da 0dB a 65dB per interfacciabilità diretta di testine phono (ripping del vinile). Equalizzazioni phono selezionabili (RIAA, FFRR, Mercury, ecc.) oppure flat. Ingresso S/PDIF ausiliario per convogliare tramite USB segnali digitali su computer privi mdi ingressi digitali. Uscite S/PDIF, AES/EBU e TosLinik

DETAILS  High-speed asynchronous USB connection. Single-ended stereo input on RCA.  S/PDIF, AES/EBU and Toslink digital outputs. Auxiliary S/PDIF input for bridging. Selectable input gain 0dB to 65dB. Wide choice of equalization curves in digital domain.  Various filter options (anti-rumble, anti-hiss, MPX).  Input impedance matching for MM and MC phono cartridges.  Remote control.  Encased in a stylish aluminium case.  FEATURES  Joplin MkII is a high performance A/D converter capable of handing up to 384kHz sampling rates and 32 bits resolution (USB output). It features a high speed asynchronous USB input based on the hiFace Two technology, further developped to allow for higher sampling rates. A comprehensive output set (S/PDIF on RCA, AES/EBU on XLR and optical on Toslink) provide great connection versatility. Also, an auxiliary S/PDIF digital input on RCA allows for re-using the digital connection used for the Joplin for a digital source, as well as for redirecting the output from a digital source to a computer which is not provided with an S/PDIF input. Despite its price, Joplin encopasses a leading edge technology for data handling and processing.  An FPGA is used to provide a seamless connection between the ADC IC and the USB port (both operating in master mode for low jitter reasons), as well as for a large number of important clock and data routing tasks, not to mention the VU-meter drive. The analog stage is based on the best PGA (Programmable Gain Amplifier) available on the market, and allows for gain as high as 65dB (equivalment to 1.43mVrms for 0dBFS). A comprehensive set of equalization curves can be selected, to accommodate all phono formats ever used from 1925 to the present day,  plus eq curves for reel-to-reel tapes with straight output from the playback head.  The equalizers digital gain allows for using cartridges with output voltage as low as 100uV.  A comprehensive set of input impedance values allow for interfacing both MM and MC cartridges, with an extra value specific for high output MCs. The small size and stylish look of the Joplin allow for a uninvasive placement in every living space.


ALIMENTATORI ESTERNI

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   info@newaudio.it   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@newaudio.it


M2TECH SUPPLY TWO     €. 489,00      Per offerta e promozioni Telefona/E-mail

alimentatore a bassissimo rumore adatto ai prodotti  EVO

DETAILS The Evo Supply Two is a very low noise 9V power supply dedicated to the Evo Two Series products. It is provided with three outputs which deliver clean current from a low noise, discrete components regulator. Outputs are switched with a rele operated by a button on the front panel. Overcurrent protection is included on each output.  The very-low-noise regulator features the same basic design as the Van Der Graaf, ensuring a residual noise which rivals that of the best high current batteries, with the extra bonus of a very long trouble-free life.  FEATURES 1) THREE OUTPUTS WITH TOTAL 2A CURRENT CAPABILITY. The Evo Supply Two has enough current capability to power any combination of Evo Two or legacy Evo products. 2) ULTRA-LOW-NOISE, DISCRETE COMPONENTS REGULATOR. A carefully thought design which allows for exceptional performance from the lightest load up to the rated current delivery. 3) FULL PROTECTION AGAINST OVERLOADS AND SHORT-CIRCUITS. The output polyswitch fuse avoids damages even in case of continuous short-circuit at one or more outputs.

M2TECH HIFACE POWER     €. 599,00      Per offerta e promozioni Telefona/E-mail

alimentatore esterno per HiFace Evo ed altri apparecchi M2Tech a 9V, dotato di batteria agli ioni di Litio e caricabatterie incorporato; stessa estetica di HiFace Evo  Cavo di uscita per EVO Supply + 38,00   Batteria di ricambio per EVO Supply 85,00  euro

Evo Supply High Performance Power Supply DETAILS Evo Supply is a battery-based high performance power supply. It’s the perfect companion to the hiFace Evo and other 9V-operated M2Tech devices. Evo Supply features a Li-Ion battery with 2200mAh capacity (minimum), an integrated battery charger and a low-noise regulator which is used to provide current to the load while the battery is being charged, thus ensuring continuous operation to the load. Charge time is about three hours, the best choice to ensure a long battery life.  Evo Supply delivers up to 1A (peak) on 9V (low-noise regulator) or on 9.5V to 11V (battery). Two outputs are available for more versatility. A switch allows for turning the load off when not used to save on battery charge. Another switch allows to select the operation mode: automatic charge or charge inhibit. Two leds indicate the presence of the wall adaptor and the charge in progress. In automatic charge mode the battery charger starts charging the battery every time the battery voltage drops below a low threshold. During the charge, the low-noise regulator feeds current to the load. At the end of the charge process, the output reverts to the battery. In charge inhibit mode, the battery is used down to the low threshold and then the load is disconnected to avoid excessive depletion. Charge is then started by switching to automatic charge mode. The battery is protected against overcharge, overcurrent and excessive depletion. A 15V/2A detachable wall adaptor provides current for battery charging and load powering when the battery is being charged. The user may disconnect the wall adaptor after battery is fully charged in order to reduce interferences to a minimum.  Evo Supply features heavy duty output connectors for reliable contacts Two cables terminated with 5.5/2.1mm plug (positive on tip) and a universal power wall adaptors are included in the package.  FEATURES 1) LONG BATTERY DURATION: around 7 hours when powering the hiFace Evo.  2) VERY LOW NOISE even when using the internal regulator.  3) STYLISH ALUMINUM CASE matches the look of the hiFace Evo.  SPECIFICATIONS Size: 105x46x104mm (w x h x d, case) 105x50x150mm (w x h x d, total) Weight: 500g (800g with wall adaptor) Supply voltage: 15VDC Supply current: 2A peak Output voltage: 9-11V (battery directly connected to output) Output current: 1A peak, 500mA continuous Inputs: supply on 5.5/2.1mm socket (positive on tip) Outputs: 2 x Bulgin heavy duty female connectors

M2TECH VAN DER GRAAF     €.   949,00      Per offerta e promozioni Telefona/E-mail
alimentatore a bassissimo rumore adatto a tutti i  prodotti M2Tech

DETAILS Very low noise, discrete components regulators, selectable output voltage on some outputs, activation and shut-down programmable sequence, universal voltage input.  FEATURES Van der Graaf is a very high performance, very low noise power supply suitable to power all M2Tech products. Thanks to its comprehensive outputs set and the settable output voltage for some outputs, user can power every M2Tech product, from 9V Evo units to 15V products like Young DSD and Joplin ADC, to the high-power Marley. Its very low output noise (comparable to that of a Li-Ion battery), even at rated load, allows for incredibly silent sonic background and finest detail resolution, markedly improving every powered product's performance. Fault-proof robustness is achieved by solid-state, automatically resettable fuses (polyswitch). In order to optimize the powering sequence of the units connected to the Van der Graaf, the user can program


AMPLIFICATORE CUFFIE

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   info@newaudio.it   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@newaudio.it


M2TECH MARLEY           €. 1.340,00     Per offerta e promozioni Telefona/E-mail

Amplificatore per cuffie dual-drive Classe A

  DETAILS Pure class-A power amplifiers, dual stereo layout to drive two headphones with independent volume setting, bridging feature to drive one headphones set in balanced mode, preamplifier output to drive power amplifiers, two inputs with tape output, auxiliary input for high current, low noise power supply. FEATURES Marley is a very high performance headphones amplifier conceived to give best sound quality with every kind of headphones, from small in-ear models to expensive and challenging planar transducers devices. Its pure Class-A, discrete components amplifiers deliver crystal-clear sound at any level up to 8Vrms in single-ended mode (that is, driving headphones provided with standard 6.35mm jack) or 16Vrms in balanced mode (that is, driving headphones provided with 4-pin XLR jack). Two stereo amplifiers are fitted into the Marley, each one with its volume control. This way, two headphones can be driven in single-ended mode to allow two listeners to enjoy their music at their favourite listening level. On the other hand, purist audiophiles using headphones with balanced drive capability can set the Marley in balanced mode, obtaining 6dB more SPL and improved sound quality. Features include input switching, preamp output to drive a power amplifier, tape output, balance, muting, mode selection (single-ended or balanced), volume display mode selection, auto switch-off. Volume can be set in 1dB steps between -78dB and 0dB. Muting attenuates the level by 20dB when needed. Auto switch off is a cool feature implemented to comply with energy saving regulations which will also be useful to users who like late night listening and falling asleep while enjoying their music. Power capability is also awesome for such a small unit: 4Wrms per channel on 8 Ohms and a SNR of 120dB (A-weighted) allow for driving high sensitivity speakers with  outstanding results (output adaptor needed). Marley is provided with a 15V-30VA wall adaptor. An input for an external high-current, low-noise power supply is also present on the rear panel. SPECIFICATIONS Inputs: 2 x line in on female, gold-plated RCAs Outputs: 2 x 1/4” stereo jack (single-ended 4-pole female XLR (balanced) pre out on female, gold-plated RCAs tape out on female, gold-plated RCAs Supply inputs: 5.5/2.1mm jack, positive on tip4-pole male XLR for +15V/-15V/+5V Output voltage: 8Vrms max (single-ended), 16Vrms max (balanced) Output power: 4Wrms p.c. @ 8 OhmsInput impedance: 40kOhms Gain: 12dB (single-ended) / 18dB (balanced) Input sensitivity: 2Vrms in for max output Frequency response: 3Hz-80kHz (+0/-0.5dB) SNR: 120dB (8Vrms out, 1kHz, A-weighted) THD+N: 0.003% (2Vrms out, 1kHz) Volume range: 0 to -78dB plus total mute (1 dB steps) Muting: -20dB Balance range: +/-6dB (1dB steps) Auto switch-off; disabled, 0 to 240 minutes (30 minutes steps) Supply: 15VDC Power consumption: 30VA Size: 200x200x50mm (w x d x h) Weight: 2kg

 

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it



 Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Nota  bene *

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a   info@newaudio.it

*I prezzi indicati  sono  di  listino  ufficiale  delle case produttrici ,nel  caso  di  diffusori  si  riferisce al prezzo  del  singolo  diffusore  per  offerte  ed  eventuali  promozioni  telefonare o  inviare e-mail.

*Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati  possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati.

*Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici

*Prezzi franco nostro magazzino


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it