Klipsch Audio Technologies
Since 1946, Klipsch Audio Technologies has been building no-compromise,
premium-quality audio products. As one of the first U.S. loudspeaker companies,
Klipsch is now a leading global manufacturer of high-performance loudspeakers
and other entertainment products including: home theater systems, surround
sound, computer speakers, iPod®/MP3 speakers, professional cinemas and
commercial venues.
DIFFUSORE DA PAVIMENTO A 3
VIE - SOSPENSIONE PNEUMATICA - 1 WOOFER DA 30, 1 MID A TROMBA, 1 TWEETER A
TROMBA - EFFICIENZA 99 DB - MASSIMA PRESSIONE SONORA 118 DB - IMPEDENZA 8 OHMS -
DIMENSIONE 60,48 CM X 39,37 CM X 33,66 CM (AXLXP) - FINITURA WALNUT, CHERRY,
BLACK ALTEZZA (IN MM) 605 LARGHEZZA (IN MM) 394 PROFONDITA' (IN MM) 337 PESO (IN
KG) 20
Heresy
III Now available for purchase direct from Klipsch.com (US residents only)!
Klipsch Heritage Series products are built to order, handmade in the US at our
Hope, Ark. manufacturing facility. Please allow approximately 4 weeks turnaround
time.FeaturesA three-way design using horn-loaded Titanium diaphragm midrange
and high frequency compression drivers. Direct-radiating 12-inch woofer for
powerful low frequencies. 99 dB sensitivity delivers Smooth, dynamic and low
distortion soundAvailable in a high-quality Cherry, Walnut or Black Ash wood
veneer finish Because of its relatively "compact" size, this model offers the
greatest degree of placement flexibility in the Heritage Series line. First
introduced in 1957, the Heresy, a three-way design, started out as a compact
center channel speaker to accompany the Klipschorn® in three-speaker stereo
arrays. In 1985, we made some changes and improvements to this model and
re-released it as the Heresy II. Today, the new Heresy III has a more powerful
woofer, a bi-wire network, and a titanium diaphragm tweeter with a larger magnet
assembly. The midrange compression driver also features a new titanium diaphragm.
All of these changes result in improved tonal balance and increased output. In
fact the Heresy III is three decibels louder (96 to 99dB), improving on its
already high sensitivity.In addition to delivering smooth, dynamic and low
distortion sound, the Heresy III is available in a high-quality cherry, walnut
or black ash wood veneer finish. Included is a slant riser base for floor
placement that can be removed for cabinet installations.Please visit our store
policy section for further details or ordering Heritage products.To order wood
samples, please email your request along with your address and phone number (US
residents only).
DIFFUSORE DA PAVIMENTO A 3
VIE - SOSPENSIONE PNEUMATICA - 1 WOOFER DA 38, 1 MID A TROMBA, 1 TWEETER A
TROMBA - EFFICIENZA 102 DB - MASSIMA PRESSIONE SONORA 119 DB - IMPEDENZA 8 OHMS
- DIMENSIONE 90,81 CM X 64,29 CM X 39,37 CM (AXLXP) - FINITURA BLACKALTEZZA (IN
MM) 908 LARGHEZZA (IN MM) 643 PROFONDITA' (IN MM) 394 PESO (IN KG) 44.5
Now
available for purchase direct from Klipsch.com (US residents only)! Klipsch
Heritage Series products are built to order, handmade in the US at our Hope,
Ark. manufacturing facility. Please allow approximately 4 weeks turnaround
time.FeaturesA three-way design using horn-loaded Midrange and high frequency
compression drivers for the midrange and treble.Direct-radiating 15-inch woofer
for powerful low frequencies.Available in a high-quality Cherry, Walnut or Black
Ash wood veneer finish Note: products are priced as "each."Initially introduced
in 1959, the Cornwall speaker was designed to serve as a larger, full-range
alternative to the Heresy when used as a center channel speaker between two
widely spaced Klipschorns. When it was discontinued in 1990, there was an outcry
from consumers resulting in a letter-writing campaign and even a petition to
bring back this storied loudspeaker.This famed speaker, now dubbed the Cornwall
III, is back and better than ever. A three-way design using horn-loaded
compression drivers for the midrange and treble and a direct-radiating 15-inch
woofer for the low frequencies, the Cornwall delivers the full-range bass
response of the Klipschorn® with sensitivity and output approaching the fully
horn-loaded models. The Cornwall III now includes a riser-base, which was
optional in previous versions. Please visit our store policy section for further
details or ordering Heritage products.
To order wood samples, please email your request along with your address and
phone number (US residents only
DIFFUSORE DA PAVIMENTO A 3
VIE - 1 WOOFER DA 38 IN TROMBA PIEGATA, 1 MID A TROMBA, 1 TWEETER A TROMBA -
EFFICIENZA 105 DB - MASSIMA PRESSIONE SONORA 121 DB - IMPEDENZA 8 OHMS -
FINITURA BLACKALTEZZA (IN MM) 978 LARGHEZZA (IN MM) 616 PROFONDITA' (IN MM) 641
PESO (IN KG) 79 Even
though the La Scala II adopts a more finished appearance, it still delivers the
same sparkling highs, extreme output and unsurpassed low distortion bass
response as the original design. It also continues to utilize the same
horn-loaded drivers as the Klipschorn, making it highly efficient and able to
produce high volumes consuming very little power and undetectable
distortion.Features Fully horn-loaded, 3-way system with a folded-horn 15"
woofer, 2” midrange and 1’ tweeter compression drivers. Capable of extreme
output levels with ultra low distortion and astonishing dynamic range Available
in a high-quality Cherry, Walnut or Black Ash wood veneer finish Detailed
Description When the La Scala first launched in 1963, audio pioneer Paul W.
Klipsch made it for Arkansas gubernatorial candidate Winthrop Rockefeller to use
as a public address speaker. Because some considered it a "portable" and more
affordable version of the revolutionary Klipschorn®, the La Scala found success
beyond the campaign. Despiteits raw, unfinished appearance, the fully
horn-loaded, three-way La Scala sounded so good people still wanted to put it in
their living rooms.Remaining virtually unchanged since those early campaign days,
Klipsch decided to cosmetically improve the raw-looking La Scala by totally
redesinging the way the cabinet was constructed. The goal was the achieve a more
finished appearance and improve cabinet ridgidity. It is now available in a
variety of high-quality wood veneer finishes, including cherry, walnut and black
ash. The La Scala II also includes a grille to cover the mid and high frequency
horns. The bass horn cabinet walls are nowconstructed of 1-inch thick MDF rather
than ¾-inch plywood to offer more support, decrease resonance and deliver
cleaner bass response.
DIFFUSORE DA PAVIMENTO A 3
VIE - 1 WOOFER DA 38 IN TROMBA PIEGATA, 1 MID A TROMBA, 1 TWEETER A TROMBA -
EFFICIENZA 104 DB - IMPEDENZA 8 OHMS - FINITURA BLACK -ALTEZZA (IN MM) 1289
LARGHEZZA (IN MM) 794 PROFONDITA' (IN MM) 718 PESO (IN KG) 79
Audio
pioneer and company founder Paul W. Klipsch launched the Klipschorn loudspeaker
in 1946 to enable people, for the first time ever, to experience the power,
detail and emotion of a live performance at home.Features Highly efficient: 105
dB 1W / 1M Fully horn-loaded, full range, three-way system with a patented
folded-horn 15" woofer delivers powerful low frequencies 2” midrange and 1”
tweeter compression drivers. Capable of extreme output levels with Commonly
called a corner-horn speaker, the remarkably uncommon Klipschorn includes a
highly efficient horn loaded tweeter and midrange compression driver. Its
patented folded-horn 15" woofer delivers powerful low frequencies.Considered a
watershed industry event, the introduction of the Klipschorn set the standard
for high sensitivity, wide dynamic range, low distortion, and smooth frequency
response. These principles, which drive the creation of every single Klipsch
loudspeaker, are what make the Klipschorn as sought after today as it was
decades ago.As the only speaker in the world to be in continuous production for
60 years, the Klipschorn has remained relatively unchanged since its inception.
In 2005, the company made some minor cosmetic and functional revisions to this
egendary speaker, including the elimination of the inset collar, or spacer,
between the upper and lower cabinets for a cleaner aesthetic appearance. A
horizontal wall seal was added to improve the low frequency horn'sresponse
accuracy.Available in a cherry, walnut or black ash wood veneer finish, the
Klipschorn reflects a level of high-quality workmanship that will never go out
of style
DIFFUSORE DA PAVIMENTO A 3
VIE - 1 WOOFER DA 38 IN TROMBA PIEGATA, 1 MID A TROMBA, 1 TWEETER A TROMBA -
EFFICIENZA 104 DB - IMPEDENZA 8 OHMS - FINITURA BLACK-ALTEZZA (IN MM) 1289
LARGHEZZA (IN MM) 794 PROFONDITA' (IN MM) 718 PESO (IN KG) 79
60th
Anniversary Klipschorn® In celebration of its 60th anniversary, Klipsch has
designed a special limited edition of the legendary Klipschorn. Originally
developed by audio pioneer Paul W. Klipsch in 1946, the Klipschorn set the
industry standard for high sensitivity, wide dynamic range, low distortion,
smooth frequency response and powerful bass. Highly efficient: 105 dB 1W / 1M
Fully horn-loaded, 3-way system with a patented folded-horn 15" woofer .Detailed
Description With a limited run of 200 pairs, the 60th anniversary Klipschorn is
crafted for high-quality sonic performance and adorned with distinct aesthetic
features that will never be available again.While each speaker's high-frequency
cabinet is decked out in a high gloss black piano finish, the front panel of the
low-frequency cabinet comes in a sophisticated Lacewood veneer. The black
anodized solid aluminum kick plate at the bottom of the speaker features a
silver PWK logo with a real diamond inset, the stone that represents 60
years.For the first time ever, the rear of the speaker has received a cosmetic,
and functional "facelift." Solid panels now enclose the rear high frequency and
low frequency cabinets to add a more elegant appearance, eliminate anycorner and
response issues and for the first time in the Klipschorns history allow for toe
in or out.Two windows are also included on the back of each anniversary
Klipschorn to display an upgraded crossover network and a silver, engraved
plaque that honors PWK and lists the speaker's limited production number.
For signal purity and perfect driver integration, the crossovers are made with
premium components and feature high-end Van den Hul internal wiring. Magnetic
grille posts allow for secure attachment and easy removal of thelow-frequency
grilles, while top-grade WBT binding posts ensure secure connection to any type
of cable
DIFFUSORE DA PAVIMENTO A 3 VIE
DI RIFERIMENTO - 3 W Ø 23 CM CON MEMBRANA IN ALLUMINIO-ROHACELL-KEVLAR -
MIDRANGE DA 11 CARICATO A TROMBA TRACTRIX - TWEETER IN TITANIO CON TROMBA
TRACTRIX - EFFICIENZA 99 DB - POTENZA MASSIMA APPLICABILE 400 W (1500 DI PICCO)
- IMPEDENZA 4 OHMS - PREDISPOSIZIONE BI-AMPING/BI-WIRING COLORI : Merlot,
Natural,Espresso
DIFFUSORE DA PAVIMENTO A 3 VIE -
3 W Ø 20 CM CON MEMBRANA IN ALLUMINIO-ROHACELL-KEVLAR - MIDRANGE DA 11 CARICATO
A TROMBA TRACTRIX - TWEETER IN TITANIO CON TROMBA TRACTRIX - EFFICIENZA 98 DB -
POTENZA MASSIMA APPLICABILE 300 W (1200 DI PICCO) - IMPEDENZA 4 OHMS -
PREDISPOSIZIONE BI-AMPING/BI-WIRING - FINITURA ZEBRAWOOD NATURALE
COLORI : Merlot, Natural,Espresso
DIFFUSORE DA PAVIMENTO A 3 VIE -
3 W Ø 18 CM CON MEMBRANA IN ALLUMINIO-ROHACELL-KEVLAR - MIDRANGE DA 11 CARICATO
A TROMBA TRACTRIX - TWEETER IN TITANIO CON TROMBA TRACTRIX - EFFICIENZA 96 DB -
POTENZA MASSIMA APPLICABILE 275 W (1100 DI PICCO) - IMPEDENZA 4 OHMS -
PREDISPOSIZIONE BI-AMPING/BI-WIRING - FINITURA ZEBRAWOOD
COLORI : Merlot, Natural,Espresso
DIFFUSORE DA SCAFFALE A 3 VIE -
1 W Ø 18 CM CON MEMBRANA IN ALLUMINIO-ROHACELL-KEVLAR - MIDRANGE DA 11 CARICATO
A TROMBA TRACTRIX - TWEETER IN TITANIO CON TROMBA TRACTRIX - EFFICIENZA 94 DB -
POTENZA MASSIMA APPLICABILE 150 W (600 DI PICCO) - IMPEDENZA 4 OHMS -
PREDISPOSIZIONE BI-AMPING/BI-WIRING - FINITURA ZEBRAWOOD NATURALE
COLORI : Merlot, Natural,Espresso
DIFFUSORE PER CANALE CENTRALE A
3 VIE - 2 W Ø 18 CM CON MEMBRANA IN ALLUMINIO-ROHACELL-KEVLAR - MIDRANGE DA 11
CARICATO A TROMBA TRACTRIX - TWEETER IN TITANIO CON TROMBA TRACTRIX - EFFICIENZA
96 DB - POTENZA MASSIMA APPLICABILE 250 W (1000 DI PICCO) - IMPEDENZA 4 OHMS -
PREDISPOSIZIONE BI-AMPING/BI-WIRING - FINITURA ZEBRAWOOD NATURALE
COLORI : Merlot, Natural,Espresso
DIFFUSORE PER CANALE SURROUND A
2 VIE DA SCAFFALE O MURO - 2 W Ø 18 CM CON MEMBRANA IN ALLUMINIO-ROHACELL-KEVLAR
- 2 TWEETER IN TITANIO CON TROMBA TRACTRIX - EFFICIENZA 96 DB - POTENZA MASSIMA
APPLICABILE 150 W (6000 DI PICCO) - IMPEDENZA 4 OHMS - PREDISPOSIZIONE BI-AMPING/BI-WIRING
- COLORI : Merlot, Natural,Espresso
SUBWOOFER AMPLIFICATO - 1 W Ø 30
CM CON MEMBRANA IN ALLUMINIO-ROHACELL-KEVLAR A LUNGA ESCURSIONE - 2 WOOFER
PASSIVI DA 30 - POTENZA 1000 W (2500 DI PICCO) - RISPOSTA IN FREQUENZA 18 / 120
HZ - SISTEMA DI CORREZIONE ACUSTICA ARC - CONROLLO A TOUCH-PANEL - FINITURA
ZEBRAWOOD NATURALE
COLORI : Merlot, Natural,Espresso
DIFFUSORE A DUE VIE - 1 W Ø 13
CM CON MEMBRANA IN ALLUMINIO-CERAMICA- TWEETER A TROMBA TRACTRIX - EFFICIENZA 92
DB - REFLEX POSTERIORE - IMPEDENZA 8 OHMS - DIMENSIONI 29 X 16,5 X 27,3 (AXLXP)
- PESO 5,5 KG - FINITURA BLACK
DIFFUSORE A DUE VIE - 1 W Ø 16,5
CM CON MEMBRANA IN ALLUMINIO-CERAMICA- TWEETER A TROMBA TRACTRIX - EFFICIENZA 95
DB - REFLEX ANTERIORE - PREDISPOSIZIONE BI-AMPING/BI-WIRING - IMPEDENZA 8 OHMS -
DIMENSIONI 39,1 X 21,6 X 31,1 (AXLXP) - PESO 10 KG - FINITURA BLACK
DIFFUSORE A DUE VIE - 1 W Ø 20
CM CON MEMBRANA IN ALLUMINIO-CERAMICA- TWEETER A TROMBA TRACTRIX - EFFICIENZA 97
DB - IMPEDENZA 8 OHMS - PREDISPOSIZIONE BI-AMPING/BI-WIRING - REFLEX ANTERIORE -
DIMENSIONI 48,3 X 23,5 X 31,1 (AXLXP) - PESO 13,6 KG - FINITURA BLACK
2 vie da pavimento - 2 W Ø 13 cm con membrana in
alluminioceramica– tweeter a tromba Tractrix – efficienza 96 dB - impedenza 8
ohms - predisposizione Bi-amping/bi-wiring - dimensioni 95,5 x 17,2 x
36,2 (axlxp) – peso 17,3 Kg - finitura black o cherryUna sintesi ideale di
tecnologia, qualità del suono e raffinatezza del design, Nell’RF-52la Tractrix®
tecnologia è stata perfezionata ridisegnando la geometria della gola della
tromba per ottenere un suono più realistico. A monte della tromba, un tweeter in
titanio da 2,5 cm con un potente magnete al neodimio assicura unacombinazione
unica di precisione, nitidezza sonora e dinamica.L’RF-52 impiega due woofer da
13,3 cm in Cerametallic™, con protezioni parapolvere in rame rovesciate,
hanno un rapporto rigidezza/massa molto alto e ottime caratteristiche di
smorzamento. La rigidezza della cassadell’RF-52 è stata ulteriormente
migliorata con traverse interne che riducono al minimo le vibrazioni dei
pannelli, che potrebbero colorare ilsuono, e con un’apertura posteriore per
eliminare il rumore di turbolenza. L’aumento delle nervature del diaframma nel
pannello inferiore e intorno alla bocca della tromba migliorano in modo
sostanziale l’acustica nell’intera gamma di frequenze. Per assicurare purezza
del segnale e perfetta integrazione dei driver, il crossover dell’RF-52 impiega
componenti della più alta qualità e cablaggi interni Klipsch su misura.
l’RF-52 è dotata di una griglia a bassa diffrazione, fissata magneticamente, che
accentua ancora di più l’eleganza di questo diffusore.
Exclusive
Tractrix® Horns have always been the key component of this critically acclaimed
series. In the RF-52, this technology has been refined to include improved
throat geometry for a more genuine, lifelike sound. Behind the horn lies a
1-inch titanium tweeter with a powerful neodymium motor structure to provide a
unique combination of precision, clarity and effortless dynamics.The RF-52
employs dual 5.25-inch woofers for a solid bass foundation. These Cerametallic™
woofers with inverted copper dust caps exhibit a very high stiffness-to-mass
ratio and superb damping characteristics.The RF-52's rigid cabinet offers
improved internal cross-bracing to minimize panel vibrationsthat can color sound
and a rear-firing port to eliminateturbulence noise. Increased baffle ribbing in
the lower panel and around the horn mouth dramatically improve acoustics across
the sonic range. Forsignal purity and perfect driver integration, the crossover
on the RF-52 features the finest components and Klipsch custom internal
wiring.Available in a black vinyl finish, the RF-52 comes with a low-diffraction,
magnetically attached grille to further accentuate the elegance of this speaker.
2 vie da pavimento - 2 W Ø
16,5 cm con membrana in alluminioceramica– tweeter a tromba Tractrix –
efficienza 97 dB - impedenza 8 ohms - predisposizione Bi-amping/bi-wiring -
dimensioni 103,1 x 21,6 x 39,4 (axlxp) – peso 24,5 Kg - finitura black o cherry
Exclusive
Tractrix® Horns have always been the key component of this critically acclaimed
series. In the RF-62, this technology has been refined to include improved
throat geometry for a more genuine, lifelike sound. Behind the horn lies a
1-inch titanium tweeter with a large ceramic motor structure to provide a unique
combination of precision, clarity and effortless power.The RF-62 employs dual
6.5-inch woofers for a solid bass foundation. These Cerametallic™ woofers with
inverted copper dust caps exhibit a very high stiffness-to-mass ratio and superb
damping characteristics.The RF-62's rigid cabinet offers improved internal
cross-bracing to minimize panel vibrations that can color sound and twin
rear-firing ports to eliminate turbulence noise. Increased baffle ribbing in the
lower panel and around the horn mouth dramatically improve acoustics across the
sonic range. For signal purity and perfect driver integration, the crossover on
the RF-62 features the finest components and Klipsch custom internal
wiring.Available in a black vinyl finish, the RF-62 comes with a low-diffraction,
magnetically attached grille to further accentuate the elegance of this speaker.
2 vie da pavimento - 2 W Ø 20 cm con membrana in
alluminioceramica– tweeter a tromba Tractrix – efficienza 98 dB - impedenza 8ohms - predisposizione Bi-amping/bi-wiring - dimensioni 110,7 x 24,1 x41,3 (axlxp) – peso 30 Kg - finitura black o cherry
Capturing
all the sonic excitement of your favorite music and movies, the Reference Series
RF-82 floorstander is unlike anything you've heard before. With its exceptional
combination of sound and style, this powerful and dynamic speaker is a must-have
for any home.Features High-performance floorstanding speaker Tractrix® horn
loaded, titanium dome compression driver for unmatched precision and
detailPowerful dual Cerametallic™ woofers provide solid, life like bass response.
Exclusive Tractrix® Horns have always been the key component of this critically
acclaimed series. In the RF-82, this technology has been refined to include
improved throat geometry for a more genuine, lifelike sound. Behind the horn
lies a 1-inch titanium tweeter with a large ceramic motor structure to provide a
unique combination of precision, clarity and effortless power.The RF-82 employs
dual 8-inch woofers for a solid bass foundation These Cerametallic™ woofers with
inverted copper dust caps exhibit a very high stiffness-to-mass ratio and superb
damping characteristics.The RF-82's rigid cabinet offers improved internal
cross-bracing to minimize panel vibrations that can color sound and twin
rear-firing ports to eliminate turbulence noise. Increased baffle ribbing in the
lower panel and around the horn mouth dramatically improve acoustics across the
sonic range. For signal purity and perfect driver integration, the crossover on
the RF-82 features the finest components and Klipsch custom internal
wiring.Available in either a cherry or black woodgrain vinyl finish, the RF-82
comes with a low-diffraction, magnetically attached grille to further accentuate
the elegance of this speaker
2 vie da pavimento - 3 W Ø 16,5 cm con membrana in
alluminioceramica– tweeter a tromba Tractrix – efficienza 99 dB - impedenza 8
ohms -dimensioni 117,1 x 21,6 x 49,5 (axlxp) – peso 36,8 Kg -predisposizione Bi-amping/bi-wiring - finitura black o cherry
Exclusive
Tractrix® Horns have always been the key component of this critically acclaimed
series. In the RF-63, this technology has been refined to includeimproved throat
geometry for a more genuine, lifelike sound. Behind the horn lies a
professional-grade 1.25-inch titanium diaphragm compressiondriver to provide a
unique combination of precision, clarity and effortless power.Featuring an
all-new driver layout, the RF-63 employs triple 6.5-inch high-output woofers
with large motor structures for a solid bass foundation andgreater control,
output and power handling. These Cerametallic™ woofers with inverted copper dust
caps exhibit a very high stiffness-to-mass ratio andsuperb damping
characteristics.The RF-63's rigid cabinet offers improved internal cross-bracing
to minimize panel vibrations that can color sound and three rear-firing ports
toeliminate turbulence noise. Increased baffle ribbing in the lower panel and
around the horn mouth dramatically improve acoustics across the sonicrange. For
signal purity and perfect driver integration, the crossover on the RF-63
features the finest components and Klipsch custom internal wiring.Premium
binding posts ensure superior connectivity.Available in either a cherry or black
real wood veneer finish, the RF-63 comes with a knife-edge back and
low-diffraction, magnetically attached grille tofurther accentuate the elegance
of this speaker.
2 vie da pavimento - 3 W Ø 20 cm con membrana in
alluminioceramica– tweeter a tromba Tractrix – efficienza 100 dB - impedenza
8 ohms - dimensioni 126 x 23,5 x 52,1 (axlxp) – peso 45 Kg -predisposizione Bi-amping/bi-wiring - finitura black o cherry
A
force to be reckoned with, the Reference Series RF-83 floorstander sets a new
standard for the line in both sound and style. With its high-end materials and
slender design, this flagship tower delivers unrivaled audio performance for
those who demand the very best.Features Ultra-high-performance floorstanding
speakersProfessional-grade titanium dome compression driver for unmatched detail
and dynamicsTriple high-output Cerametallic™ woofers deliver intense bass
response Exclusive Tractrix® Horns have always been the key component of this
ritically acclaimed series. In the RF-83, this technology has been refined to
include improved throat geometry for a more genuine, lifelike sound. Behind the
horn lies aprofessional-grade 1.25-inch titanium diaphragm compression driver to
provide a unique combination of precision, clarity andeffortlesspower.Featuring
an all-new driver layout, the RF-83 employs triple 8-inch high-output woofers
with large motor structures for a solid bass foundation andgreater control,
output and power handling. These Cerametallic™ woofers with inverted copper dust
caps exhibit a very high stiffness-to-mass ratioand superb damping
characteristics.The RF-83's rigid cabinet offers improved internal cross-bracing
to minimize panel vibrations that can color sound and three rear-firing ports
toeliminate turbulence noise. Increased baffle ribbing in the lower panel and
around the horn mouth dramatically improve acoustics across the sonic range. For
signal purity and perfect driver integration, the crossover on the RF-83
features the finest components and Klipsch custom internal wiring. Premium
binding posts ensure superior connectivity. Available in either a cherry or
black real wood veneer finish, the RF-83 comes with a knife-edge back and
low-diffraction, magnetically attached grille to further accentuate the elegance
of this speaker. RF-83 Specificationsrequency response 29Hz-21kHz +/-3dB power
handling 250W RMS / 1000W Peak sensitivity 100dB @ 2.83V / 1m nominal impedance
8 ohms compatible high frequency drivers 1.25" (3.2cm) Titanium diaphragm
compression driver mated to 90x60 square Tractrix® Horn high freq crossover
1650Hz low frequency drivers Triple 8" (20.3cm) High-output Cerametallic™ cone
woofers enclosure type Bass-reflex via triple rear-firing ports height 49.6"
(126cm) (w/feet) width 9.25" (23.5cm) depth 20.5" (52.1cm) weight 100lbs
(45.4kg) finishes Cherry or Black Ash wood veneer built from 2006
Because
the center channel speaker reproduces more than 60 percent of a movie soundtrack,
Klipsch spared no expense when developing the Reference Series RC-52. With its
ideal combination of technology, performance and design, this speaker delivers a
seamless, engaging soundstage that puts listeners inside the action.Features
High-performance center channel Tapered Array™ design for maximum dialogue
clarityMagnetically shielded drivers to prevent video interference
Detailed Description Exclusive Tractrix® Horns have always been the key
component of this critically acclaimed series. In the RC-52, this technology has
been refined to include improved throat geometry for a more genuine, lifelike
sound. Behind the horn lies a 1-inch titanium tweeter with a powerful neodymium
magnet motor structure to provide a unique combination of precision, clarity and
effortless dynamics.The RC-52 employs dual 5.25-inch woofers for a solid bass
foundation. These Cerametallic™ woofers with inverted copper dust caps exhibit a
very high stiffness-to-mass ratio and superb damping characteristics.Klipsch Tapered Array™ technology operates both woofers at the lowest
frequencies - maintaining the high output capability necessary for good center
channel performance - but only one operates all the way through the midrange to
where the tweeter takes over. This eliminates acoustic interference between the
woofer outputs, a flaw in conventional speaker designs that can severely impair
sound quality at the sides of the listening area.The RC-52's rigid cabinet offers improved internal cross-bracing to minimize
panel vibrations that can color sound. Twin front-firing ports eliminate
turbulence noise, while increased baffle ribbing around the horn mouth
dramatically improves acoustics across the sonic range. For signal purity and
perfect driver integration, the crossover on the RC-52 features the finest
components and Klipsch custom internal wiring.Available in a black woodgrain
vinyl finish, the fully video-shielded RC-52 comes with a low-diffraction,
magnetically attached grille to further accentuate the elegance of this speaker.
DIFFUSORE PER CANALE CENTRALE
- 2 W Ø 16,5 CM CON MEMBRANA IN ALLUMINIO-CERAMICA - TWEETER A TROMBA TRACTRIX -
EFFICIENZA 98 DB - IMPEDENZA 8 OHMS - PREDISPOSIZIONE BI-AMPING/BI-WIRING -
DIMENSIONI 20,3 X 59,7 X 31,8 (AXLXP) - PESO 14,5 KG - FINITURA BLACK ALTEZZA
(IN MM) 203 LARGHEZZA (IN MM) 597 PROFONDITA' (IN MM) 318 PESO (IN KG) 14.5
As
the leading supplier to the cinema industry, Klipsch understands that a movie
falls apart if every whisper of dialog is not heard. With its superior
technology and elegant design, the Reference Series RC-62 center channel
delivers all of the detail, subtleties and dynamics required for the ultimate
home theater experience.
Features High-performance center channel Tapered Array™ design for maximum
dialogue clarityMagnetically shielded drivers to prevent video interference
Exclusive Tractrix® Horns have always been the key component of this critically
acclaimed series. In the RC-62, this technology has been refined to include
improved throat geometry for a more genuine, lifelike sound. Behind the horn
lies a 1-inch titanium tweeter with a large ceramic motor structure to provide a
unique combination of precision, clarity and effortless power.The RC-62 employs
dual 6.5-inch woofers for a solid bass foundation. These Cerametallic™ woofers
with inverted copper dust caps exhibit a very high stiffness-to-mass ratio and
superb damping characteristics.Klipsch Tapered Array™ technology operates both
woofers at the lowest frequencies - maintaining the high output capability
necessary for good center channel performance - but only one operates all the
way through the midrange to where the tweeter takes over. This eliminates
acoustic interference between the woofer outputs, a flaw in conventional speaker
designs that can severely impair sound quality at the sides of the listening
area.The RC-62's rigid cabinet offers improved internal cross-bracing to
minimize panel vibrations that can color sound. Twin front-firing ports
eliminate turbulence noise, while increased baffle ribbing around the horn mouth
dramatically improves acoustics across the sonic range. For signal purity and
perfect driver integration, the crossover onthe RC-62 features the finest
components and Klipsch custom internal wiring.Available in either a cherry or
black woodgrain vinyl finish, the fully video-shielded RC-62 comes with a
low-diffraction, magnetically attached grille to further accentuate the elegance
of this speaker.
DIFFUSORE PER CANALE CENTRALE
- 4 W Ø 16,5 CM CON MEMBRANA IN ALLUMINIO-CERAMICA - TWEETER A TROMBA TRACTRIX -
EFFICIENZA 99 DB - IMPEDENZA 8 OHMS - DIMENSIONI 20,3 X 83,8 X 34,1 (AXLXP) -
PESO 27,7 KG - FINITURA BLACK ALTEZZA (IN MM) 203 LARGHEZZA (IN MM) 838
PROFONDITA' (IN MM) 343 PESO (IN KG) 27.7
Hope
your movie dialogue is good because with the flagship Reference Series RC-64
center channel you're going to hear every word of it. Designed to be one of the
most unique and powerful center channels on the market, this amazing speaker is
certainly a force to be reckoned with.Features Ultra-high-performance center
channel speaker Tapered Array™ design for maximum dialogue clarity Magnetically
shielded drivers to prevent video interferenceFurniture-grade wood veneer
Exclusive Tractrix® Horns have always been the key component of this critically
acclaimed series. In the RC-64, this technology has been refined to include
improved throat geometry for a more genuine, lifelike sound. Behind the horn
lies a professional-grade 1.25-inch titanium diaphragm compression driver to
provide a unique combination of precision, clarity and effortless power.The
RC-64 employs four 6.5-inch high-output woofers for a solid bass foundation.
These Cerametallic™ woofers with inverted copper dust caps exhibit a very high
stiffness-to-mass ratio and superb damping characteristics.Klipsch Tapered Array™
technology operates all of the woofers at the lowest frequencies - maintaining
the high output capability necessary for good center channelperformance - but
only two operate all the way through the midrange to where the tweeter takes
over. This eliminates acoustic interference between the woofer outputs, a flaw
in conventional speaker designs that can severely impair sound quality at the
sides of the listening area.The RC-64's sealed cabinet offers improved internal
cross-bracing to minimize panel vibrations that can color sound. Increased
baffle ribbing around the horn mouth dramatically improves acoustics across the
sonic range. For signal purity and perfect driver integration, the crossover on
the RC-64 features the finest components and Klipsch custom internal wiring.
Bi-wire inputs with premium binding posts ensure superior connectivity.Available
in either a cherry or black real wood veneer finish, the fully video-shielded
RC-64 comes with a knife-edge back and low-diffraction, magnetically attached
grilleto further accentuate the elegance of this speaker.
KLIPSCH RS 10 BLACK DIFFUSORE
SURROUND TRIPOLARE - 1 W Ø 11 CM CON MEMBRANA IN ALLUMINIO-CERAMICA - 2 TWEETER
A TROMBA TRACTRIX - IMPEDENZA 8 OHMS - CABLAGGIO MONSTER CABLE -
FINITURABLACKALTEZZA (IN MM) 142 LARGHEZZA (IN MM) 323 PROFONDITA' (IN MM) 147
PESO (IN KG) 2.3
RS-10 Part of the new
entry-level Reference 10 family, the RS-10 surround loudspeaker offers the same
advanced technology and world-class materials as the Reference III surrounds but
from a smaller enclosure and at a lower price point.Features Back-panel keyhole
and threaded insert for wall or ceiling mounting WDST design for superior
surround envelopment and effect localization Dual Tractrix Horn titanium dome
compression driver tweeters Cerametallic cone wooferThe RS-10 delivers precise
sonic detail through the careful positioning of two Tractrix® Horn loaded
titanium-dome tweeters and one 4-inch woofer. By aligning the two horns at 90
degrees with respect to each other, along with the front-firing woofer, the
RS-10 smoothly covers a 180-degree horizontal arc, allowing maximum placement
flexibility. This unique Wide Dispersion Surround Technology™ delivers a new
dimension of reality and convenience, and produces a smooth, seamless broad
distribution of sound, which is the perfect vehicle for every surround
format.The woofer on the RS-10 still features Klipsch's distinctive,
copper-colored Cerametallic™ material. Made with an anodized aluminum, this cone
is strong and dent resistant. The anodizing process converts its inner and outer
surfaces to ceramic. The outcome is a rigid cone with superb damping
characteristics that will not flex or resonate at frequencies within the
woofer's operating range.As in all Reference Series speakers, the RS-10
crossover network is constructed using extremely high-quality components
including top-of-the-line internal wiring, polyester film-type capacitors and an
air-core inductor to ensure signal purity and proper driver integration.The
RS-10 comes with a back-panel keyhole for on-wall mounting and a threaded insert
for attachment to popular adjustable wall and ceiling brackets.Available in a
black vinyl finish, the RS-10 features a low-diffraction sculpted baffle and a
grille for an elegant fit and finish.Because it is capable of producing
enveloping ambient sound fields and localizing specific surround effects, the
RS-10 will give its listeners a level of you-are-there realism that is unheard
of in this price category
DIFFUSORE SURROUND DIPOLARE - 2
W Ø 10,2 CM CON MEMBRANA IN ALLUMINIO CERAMICA - CARICO REFLEX - 2 TWEETER A
TROMBA TRACTRIX - EFFICIENZA 93 DB - IMPEDENZA 8 OHMS - DIMENSIONI 25,4 X 27,3 X
19,7 (AXLXP) - PESO 4,5 KG - FINITURA BLACKALTEZZA (IN MM) 254 LARGHEZZA (IN MM)
273 PROFONDITA' (IN MM) 197 PESO (IN KG) 4.5 RS-42 Delivering
detailed and lifelike performances, the Reference Series RS-42 brings a new
dimension of reality and convenience to the world of surround sound. Offering
superior technology and elegant design at an enticing price, this surround
speaker let's you experience the full impact of high-performance special
effects.Features High-performance surround speaker WDST™ design for maximum
coverage and ease of placement
Clean, compact shape for minimal room intrusion « BackFind A Dealer» Find an
authorized dealer Downloads » Global Manual (1.38 MB»CutSheet (250.45 KB)Details»
Detailed Description Detailed DescriptionAdopting a completely new cabinet and
driver layout that is similar to the Klipsch THX® Ultra2 KS-525-THX surround
speaker, the RS-42 establishes greater output, improved coverage and increased
power handling to further extend Klipsch's best-in-class surround sound
performance.Exclusive Tractrix® Horns have always been the key component of the
Reference Series. In the RS-42, this technology has been refined to include
improved throat geometry for a more genuine, lifelike sound. Behind the
speaker's dual horns lie 1-inch titanium tweeters with powerful neodymium magnet
motor structures to provide a unique combination of precision, clarity and
effortless dynamics.The RS-42 employs dual 4-inch woofers for a solid bass
foundation. These Cerametallic™ woofers with inverted copper dust caps exhibit a
very high stiffness-to-mass ratio and superb damping characteristics.
Klipsch Wide Dispersion Surround Technology™ (WDST) provides crystal-clear sonic
detail even in listening areas with less than ideal configurations. The Tractrix
Horns deliver a 90-degree wide by 60-degree high dispersion pattern. By aligning
two horns at 90-degrees with respect to each other, WDST smoothly covers a
180-degree horizontal arc. In other words, the surround sound is pointed at you
no matter where you are seated. While increased baffle ribbing around the horn
mouth dramatically improves acoustics across the sonic range, the crossover
utilizes Klipsch custom internal wiring and the finest components to provide
signal purity and perfect driver integration.
Available in a matte black vinyl finish, the RS-42 also features side-firing
ports to eliminate turbulence noise and back-panel keyholes and ¼" threaded
inserts to simplify installation. A low-diffraction, magnetically attached
grille further accentuates the elegance of this speaker.
DIFFUSORE SURROUND DIPOLARE - 2
W Ø 13,3 CM CON MEMBRANA IN ALLUMINIO-CERAMICA - CARICO REFLEX - 2 TWEETER A
TROMBA TRACTRIX - EFFICIENZA 95 DB - IMPEDENZA 8 OHMS - DIMENSIONI 33 X 32 X
21,6 (AXLXP) - PESO 6,8 KG - FINITURA BLACK ALTEZZA (IN MM) 330 LARGHEZZA (IN MM)
320 PROFONDITA' (IN MM) 216 PESO (IN KG) 6.8
RS-52
Revealing surprising layers of detail, the Reference Series RS-52 brings a huge
dose of reality and convenience to the world of surround sound. With its
superior technology and elegant design, this speaker lets you hear everything in
its full glory.FeaturesHigh-performance surround speakerWDST™ design for maximum
coverage and ease of placement
Clean, compact shape for minimal room intrusion Detailed DescriptionAdopting a
completely new cabinet and driver layout that is similar to the Klipsch THX®
Ultra2 KS-525-THX surround speaker, the RS-52 establishes greater output,
improved coverage and increased power handling to further extend Klipsch's
best-in-class surround sound performance.Exclusive Tractrix® Horns have always
been the key component of the Reference Series. In the RS-52, this technology
has been refined to include improved throat geometry for a more genuine,
lifelike sound. Behind the speaker's dual horns lie 1-inch titanium tweeters
with powerful neodymium magnet motor structures to provide a unique combination
of precision, clarity and effortless dynamics.
The RS-52 employs dual 5.25-inch woofers for a solid bass foundation. These
Cerametallic™ woofers with inverted copper dust caps exhibit a very high
stiffness-to-mass ratio and superb damping characteristics.Klipsch Wide
Dispersion Surround Technology™ (WDST) provides crystal-clear sonic detail even
in listening areas with less than ideal configurations. The Tractrix Horns
deliver a 90-degree wide by 60-degree high dispersion pattern. By aligning two
horns at 90-degrees with respect to each other, WDST smoothly covers a
180-degree horizontal arc. In other words, the surround sound is pointed at you
no matter where you are seated. While increased baffle ribbing around the horn
mouth dramatically improves acoustics across the sonic range, the crossover
utilizes Klipsch custom internal wiring and the finest components to provide
signal purity and perfect driver integration.Available in a matte black vinyl
finish, the RS-52 also features side-firing ports to eliminate turbulence noise
and back-panel keyholes and ¼" threaded inserts to simplify installation. A
low-diffraction, magnetically attached grille further accentuates the elegance
of this speaker.
KLIPSCH RS 62 BLACK DIFFUSORE
SURROUND BIPOLARE - 2 W Ø 16,5 CM CON MEMBRANA IN ALLUMINIO-CERAMICA - CARICO
REFLEX - 2 TWEETER A TROMBA TRACTRIX - EFFICIENZA 97 DB - IMPEDENZA 8 OHMS -
DIMENSIONI 38,1 X 37,5 X 24,8 (AXLXP) - PESO 12,7 KG - FINITURA BLACKALTEZZA (IN
MM) 330 LARGHEZZA (IN MM) 320 PROFONDITA' (IN MM) 216 PESO (IN KG) 6.8
RS-62
Uncovering every last drop of detail, the flagship Reference Series RS-62 lets
listeners experience the true impact and exhilaration of surround sound. With
its ideal combination of technology, performance and design, this surround
speaker represents the best in edge-of-your-seat excitement. Features
Ultra-high-performance surround speakerWDST™ design for maximum coverage and
ease of placement Clean, contemporary shape for minimal room intrusion Detailed
DescriptionDetailed Description Adopting a completely new cabinet and driver
layout that is similar to the Klipsch THX® Ultra2 KS-525-THX surround speaker,
the RS-62 establishes greater output, improved coverage and increased power
handling to further extend Klipsch's best-in-class surround sound
performance.Exclusive Tractrix® Horns have always been the key component of the
Reference Series. In the RS-62, this technology has been refined to include
improved throat geometry for a more genuine, lifelike sound. Behind the
speaker's dual horns lie 1-inch titanium tweeters with large ceramic motor
structures to provide a unique combination of precision, clarity and effortless
power.The RS-62 employs dual 6.5-inch woofers for a solid bass foundation. These
Cerametallic™ woofers with inverted copper dust caps exhibit a very high
stiffness-to-mass ratio and superb damping characteristics.Klipsch Wide
Dispersion Surround Technology™ (WDST) provides crystal-clear sonic detail even
in listening areas with less than ideal configurations. The Tractrix Horns
deliver a 90-degree wide by 60-degree high dispersion pattern. By aligning two
horns at 90-degrees with respect to each other, WDST smoothly covers a
180-degree horizontal arc. In other words, the surround sound is pointed at you
no matter where you are seated. While increased baffle ribbing around the horn
mouth dramatically improves acoustics across the sonic range, the crossover
utilizes Klipsch custom internal wiring and the finest components to provide
signal purity and perfect driver integration.Available in a matte black vinyl
finish, the RS-62 also features side-firing ports to eliminate turbulence noise
and back-panel keyholes and ¼" threaded inserts to simplify installation. A low
diffraction, magnetically attached grille further accentuates the elegance of
this speaker.
DIFFUSORE A DUE VIE - 2 W Ø 11
CM CON MEMBRANA IN ALLUMINIO-CERAMICA- TW A TROMBA TRACTRIX - IMPEDENZA 8 OHMS -
EFFICIENZA 94 DB/W/M - DIMENSIONI 61 X 14,6 X 11,4 - POSSIBILITA` DI USO A
PAVIMENTO, A SCAFFALE, A MURO E COME CANALE CENTRALE - BASE MULTIFUNZIONE IN
DOTAZIONE - FINITURA BLACK - IL PREZZO SI RIFERISCE AD UN SOLO DIFFUSOREALTEZZA
(IN MM) 610 LARGHEZZA (IN MM) 146 PROFONDITA' (IN MM) 114 PESO (IN KG) 6.4
Despite its slim appearance, the RVX-42 delivers an adrenaline rush of sound
that's set to stun. In fact, it received a 2004 Distributed Audio Award from
Electronic House Expo for being the best on-wall speaker for less than $1,000
per pair. FeaturesDual 4-inch Cerametallic™ woofers 1-inch titanium-dome
compression drivers Round Tractrix® Horn for maximum clarity and efficiency
Available in black or silver finish Detailed Description With similar flatness
and styling to popular plasma and LCD televisions, the Klipsch Reference Series
RVX-42 is a high-performance audio solution that complements this growing
consumerelectronics segment.This on-wall model has a single-piece aluminum
extrusion enclosure. It employs dual 4-inch Cerametallic™ woofers and uses a
1-inch titanium-dome compression driver mated to a round Tractrix® Horn for
maximum clarity and efficiency.The RVX-42 goes well with 42-inch or larger
plasma and LCD screens. It also features keyhole mounts (sized for a single-gang
electrical box), two 3/8"-16 threaded inserts for optional wall mounts and a
pedestal base. There are two insert locations on the RVX-42 where the pedestal
can be positioned - one in the center and one on the bottom so the loudspeaker
can either serve as a center channel or bookshelf. Another key feature is a bass
compensation switch for the best possible sonic performance either on-wall or
off-wall.Available in the same black or silver finish as the Klipsch Reference
Satellites, the RVX-42, which is packaged and sold individually, can be combined
with these compact speakers to createcomplete systems. For example, you can
create a 5.1-channel surround sound system using three RVX-42s (two main
channels and one center channel), a pair of Reference Satellite RSX-4sfor
surrounds and a
2 vie da pavimento - 4 W Ø 13,5 cm con membrana in
alluminioceramica– tweeter a tromba Tractrix – efficienza 98 dB - impedenza 8ohms - predisposizione Bi-amping/bi-wiring – dimensioni 125,1 x 17,8 x16,5 (inclusa base) – finitura black o silver
With
a contemporary design on the outside and the old school heart of Klipsch beating
on the inside, the award-winning Reference Series RVX-54 floorstanding
loudspeaker is the perfect high-performance audio solution for today's
hot-selling plasma and LCD televisions.FeaturesFour active 5.25-inch
Cerametallic™ woofers 1-inch titanium-dome compression drivers Round Tractrix®
Horn for maximum Detailed DescriptionThe RVX-54 has a single-piece aluminum
extrusion enclosure. It employs four active 5.25-inch Cerametallic™ woofers and
uses a 1-inch titanium-dome compressiondrivers mated to a round Tractrix® Horn
for maximum clarity and efficiency. Available in the same black or silver finish
as the Klipsch Reference Satellites, the RVX-54, which is packaged and sold
individually, can be combined with these compact speakers to create complete
systems. For example, you can create a 5.1-channel surround sound system using a
pair of RVX-54 main channels, a pair of Reference Satellite RSX-4s for surrounds,
an RVX-42 for a center channel and a Reference Series RW-12 subwoofer.Don't let
the slim appearance of the RVX-54 fool you. This amazing loudspeaker has a
powerful punch that creates anything but thin, wimpy sound. In fact, it snared a
CES Innovations Award for being one of the best designed and engineered audio
products for 2005.
Diffusore da pavimento a due vie – 1 W Ø 16 cm con membrana in
alluminio-ceramica- tweeter a tromba Tractrix – efficienza 93 dB – reflex
anteriore - impedenza 8 ohms – finitura cherry, nera
Diffusore da pavimento a due vie – 2 W Ø 16 cm con membrana in
alluminio-ceramica- tweeter a tromba Tractrix – efficienza 95,5 dB – reflex
anteriore - impedenza 8 ohms – finitura cherry, nera
Diffusore da pavimento a due vie – 2 W Ø 20 cm con membrana in
alluminio-ceramica- tweeter a tromba Tractrix – efficienza 97 dB – reflex
anteriore - impedenza 8 ohms – finitura cherry, nera
Subwoofer amplificato –
altoparlante da 250 mm. – amplificatore da 200 W RMS (potenza dinamica 410W) –
risposta in frequenza 28-120 Hz. – ingressi sia a livello linea che speakers -
controllo fase e taglio variabile da 40 a 120 Hz – dimensioni 43,2 x 35,6 x 47,9
(A x L x P)- finitura black-
Subwoofer amplificato –
altoparlante da 300 mm. – amplificatore da 300 W RMS (potenza dinamica 650W) –
risposta in frequenza 24-120 Hz. – ingressi sia a livello linea che speakers -
controllo fase e taglio variabile da 40 a 120 Hz – dimensioni 46,7 x 38,1 x 50,5
(A x L x P) - finitura black-
....IN ALLESTIMENTO.........TELEFONARE
Legenda istruzioni
Clicca
per qui per vedere : FOTO PRODOTTO
Clicca
per qui per vedere : ISTRUZIONI PRODOTTO
Clicca
per qui per vedere : CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO
Clicca
per qui per vedere : DATI TECNICI SPECIFICHE
PRODOTTO
Attenzione
Per ordinare o avere
gli ultimi prezzi aggiornati telefona al
0174 670100
o invia un E-mail a info@sinergy.us
Il presente listino
sostituisce ed annulla ogni precedente.I prezzi indicati si
riferiscono a singolo diffussore.
Le caratteristiche e i prezzi indicati possono variare senza
preavviso telefonare o inviare un e-mail per ulteriori domande e
conferme sui prezzi sopra riportati.
Prezzi
franco nostro magazzino.
Tutti i marchi citati nel presente listino sono di proprietà e
registrati alle rispettive Case Produttrici
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.gif)
.jpg)
Heresy
III Now available for purchase direct from Klipsch.com (US residents only)!
Klipsch Heritage Series products are built to order, handmade in the US at our
Hope, Ark. manufacturing facility. Please allow approximately 4 weeks turnaround
time.FeaturesA three-way design using horn-loaded Titanium diaphragm midrange
and high frequency compression drivers. Direct-radiating 12-inch woofer for
powerful low frequencies. 99 dB sensitivity delivers Smooth, dynamic and low
distortion soundAvailable in a high-quality Cherry, Walnut or Black Ash wood
veneer finish Because of its relatively "compact" size, this model offers the
greatest degree of placement flexibility in the Heritage Series line. First
introduced in 1957, the Heresy, a three-way design, started out as a compact
center channel speaker to accompany the Klipschorn® in three-speaker stereo
arrays. In 1985, we made some changes and improvements to this model and
re-released it as the Heresy II. Today, the new Heresy III has a more powerful
woofer, a bi-wire network, and a titanium diaphragm tweeter with a larger magnet
assembly. The midrange compression driver also features a new titanium diaphragm.
All of these changes result in improved tonal balance and increased output. In
fact the Heresy III is three decibels louder (96 to 99dB), improving on its
already high sensitivity.In addition to delivering smooth, dynamic and low
distortion sound, the Heresy III is available in a high-quality cherry, walnut
or black ash wood veneer finish. Included is a slant riser base for floor
placement that can be removed for cabinet installations.Please visit our store
policy section for further details or ordering Heritage products.To order wood
samples, please email your request along with your address and phone number (US
residents only).
.jpg){kind=small}
.jpg){kind=small}
.jpg)
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.gif)
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.gif)
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.gif)
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.gif)
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.gif)
Clicca
per qui per vedere : FOTO PRODOTTO
Clicca
per qui per vedere : DATI TECNICI SPECIFICHE
PRODOTTO